123456789101112131415161718192021 |
- How to use U-Boot on MX6Q/DL Udoo boards
- ----------------------------------------
- - Build U-Boot for MX6Q/DL Udoo boards:
- $ make mrproper
- $ make udoo_defconfig
- $ make
- This will generate the SPL image called SPL and the u-boot.img.
- - Flash the SPL image into the SD card:
- sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
- - Flash the u-boot.img image into the SD card:
- sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
- - Insert the SD card in the board, power it up and U-Boot messages should
- come up.
|