12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485 |
- // SPDX-License-Identifier: GPL-2.0+
- /*
- * Copyright (C) 2019 Mauro Condarelli <mc5686@mclink.it>
- */
- /dts-v1/;
- #include "mt7628a.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- / {
- compatible = "vocore,vocore2", "ralink,mt7628a-soc";
- model = "VoCore2";
- aliases {
- serial0 = &uart2;
- spi0 = &spi0;
- };
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
- leds {
- compatible = "gpio-leds";
- power {
- label = "vocore:power";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
- chosen {
- bootargs = "console=ttyS2,115200";
- stdout-path = &uart2;
- };
- };
- &pinctrl {
- state_default: pin_state {
- p0led {
- groups = "p0led_a";
- function = "led";
- };
- };
- };
- &uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pwm_pins>;
- };
- &spi0 {
- status = "okay";
- nor0: spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <40000000>;
- reg = <0>;
- };
- };
- ð {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_iot_mode>;
- mediatek,poll-link-phy = <0>;
- };
- &mmc {
- status = "okay";
- bus-width = <4>;
- max-frequency = <48000000>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- pinctrl-names = "default";
- pinctrl-0 = <&sd_iot_mode>;
- };
|