Browse Source

km/spi: remove deprecated SPI flash driver code for KM Kirkwood boards

KM Kirkwood boards now implement the driver model for its SPI flash
interface. Therefore, the old board specific claim and release functions
can be deleted. The preprocessor definition CONFIG_SYS_KW_SPI_MPP is yet
unused as well. All its appearances and dependencies are removed in the
kirkwood_spi driver, header files and finally the configuration whitelist.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Pascal Linder 5 years ago
parent
commit
fd9d70d738

+ 0 - 11
arch/arm/include/asm/arch-mvebu/spi.h

@@ -23,17 +23,6 @@ struct kwspi_registers {
 	u32 dw_cfg;	/* 0x10620 - Direct Write Configuration */
 };
 
-/* They are used to define CONFIG_SYS_KW_SPI_MPP
- * each of the below #defines selects which mpp is
- * configured for each SPI signal in spi_claim_bus
- * bit 0: selects pin for MOSI (MPP1 if 0, MPP6 if 1)
- * bit 1: selects pin for SCK (MPP2 if 0, MPP10 if 1)
- * bit 2: selects pin for MISO (MPP3 if 0, MPP11 if 1)
- */
-#define MOSI_MPP6	(1 << 0)
-#define SCK_MPP10	(1 << 1)
-#define MISO_MPP11	(1 << 2)
-
 /* Control Register */
 #define KWSPI_CSN_ACT		(1 << 0) /* Activates serial memory interface */
 #define KWSPI_SMEMRDY		(1 << 1) /* SerMem Data xfer ready */

+ 0 - 12
board/keymile/km_arm/km_arm.c

@@ -310,18 +310,6 @@ int board_late_init(void)
 	return 0;
 }
 
-int board_spi_claim_bus(struct spi_slave *slave)
-{
-	kw_gpio_set_value(KM_FLASH_GPIO_PIN, 0);
-
-	return 0;
-}
-
-void board_spi_release_bus(struct spi_slave *slave)
-{
-	kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1);
-}
-
 static const u32 spi_mpp_config[] = {
 	MPP1_SPI_MOSI,
 	MPP2_SPI_SCK,

+ 0 - 36
drivers/spi/kirkwood_spi.c

@@ -151,10 +151,6 @@ void spi_free_slave(struct spi_slave *slave)
 	free(slave);
 }
 
-#if defined(CONFIG_SYS_KW_SPI_MPP)
-u32 spi_mpp_backup[4];
-#endif
-
 __attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
 {
 	return 0;
@@ -162,34 +158,6 @@ __attribute__((weak)) int board_spi_claim_bus(struct spi_slave *slave)
 
 int spi_claim_bus(struct spi_slave *slave)
 {
-#if defined(CONFIG_SYS_KW_SPI_MPP)
-	u32 config;
-	u32 spi_mpp_config[4];
-
-	config = CONFIG_SYS_KW_SPI_MPP;
-
-	if (config & MOSI_MPP6)
-		spi_mpp_config[0] = MPP6_SPI_MOSI;
-	else
-		spi_mpp_config[0] = MPP1_SPI_MOSI;
-
-	if (config & SCK_MPP10)
-		spi_mpp_config[1] = MPP10_SPI_SCK;
-	else
-		spi_mpp_config[1] = MPP2_SPI_SCK;
-
-	if (config & MISO_MPP11)
-		spi_mpp_config[2] = MPP11_SPI_MISO;
-	else
-		spi_mpp_config[2] = MPP3_SPI_MISO;
-
-	spi_mpp_config[3] = 0;
-	spi_mpp_backup[3] = 0;
-
-	/* set new spi mpp and save current mpp config */
-	kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup);
-#endif
-
 	return board_spi_claim_bus(slave);
 }
 
@@ -199,10 +167,6 @@ __attribute__((weak)) void board_spi_release_bus(struct spi_slave *slave)
 
 void spi_release_bus(struct spi_slave *slave)
 {
-#if defined(CONFIG_SYS_KW_SPI_MPP)
-	kirkwood_mpp_conf(spi_mpp_backup, NULL);
-#endif
-
 	board_spi_release_bus(slave);
 }
 

+ 0 - 5
include/configs/km/km_arm.h

@@ -201,11 +201,6 @@ int get_scl(void);
 
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
-
-/* SPI bus claim MPP configuration */
-#define CONFIG_SYS_KW_SPI_MPP	0x0
-
-#define FLASH_GPIO_PIN			0x00010000
 #define KM_FLASH_GPIO_PIN	16
 
 #define	CONFIG_KM_UPDATE_UBOOT						\

+ 0 - 1
scripts/config_whitelist.txt

@@ -3066,7 +3066,6 @@ CONFIG_SYS_JFFS2_SORT_FRAGMENTS
 CONFIG_SYS_KMBEC_FPGA_BASE
 CONFIG_SYS_KMBEC_FPGA_SIZE
 CONFIG_SYS_KWD_CONFIG
-CONFIG_SYS_KW_SPI_MPP
 CONFIG_SYS_L2
 CONFIG_SYS_L2_PL310
 CONFIG_SYS_L2_SIZE