Browse Source

Convert ISO-8859 files to UTF-8

There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Albert ARIBAUD 13 years ago
parent
commit
fa82f871c8
100 changed files with 184 additions and 184 deletions
  1. 5 5
      MAINTAINERS
  2. 2 2
      arch/arm/cpu/arm1136/start.S
  3. 2 2
      arch/arm/cpu/arm720t/start.S
  4. 2 2
      arch/arm/cpu/arm920t/start.S
  5. 2 2
      arch/arm/cpu/arm925t/start.S
  6. 2 2
      arch/arm/cpu/arm926ejs/omap/reset.S
  7. 2 2
      arch/arm/cpu/arm926ejs/start.S
  8. 2 2
      arch/arm/cpu/arm926ejs/versatile/reset.S
  9. 2 2
      arch/arm/cpu/arm946es/start.S
  10. 2 2
      arch/arm/cpu/arm_intcm/start.S
  11. 7 7
      arch/arm/cpu/ixp/npe/include/IxAtmdAccCtrl.h
  12. 3 3
      arch/arm/cpu/ixp/npe/include/IxOsal.h
  13. 2 2
      arch/arm/cpu/lh7a40x/start.S
  14. 1 1
      arch/arm/cpu/sa1100/start.S
  15. 1 1
      arch/arm/include/asm/arch-s3c24x0/s3c2400.h
  16. 1 1
      arch/arm/include/asm/arch-s3c24x0/s3c2410.h
  17. 1 1
      arch/arm/include/asm/arch-s3c24x0/s3c24x0.h
  18. 1 1
      arch/powerpc/cpu/mpc8260/cpu_init.c
  19. 1 1
      arch/sparc/cpu/leon3/usb_uhci.c
  20. 1 1
      arch/x86/cpu/Makefile
  21. 1 1
      arch/x86/cpu/config.mk
  22. 1 1
      arch/x86/cpu/cpu.c
  23. 2 2
      arch/x86/cpu/interrupts.c
  24. 1 1
      arch/x86/cpu/resetvec.S
  25. 1 1
      arch/x86/cpu/sc520/Makefile
  26. 1 1
      arch/x86/cpu/sc520/sc520.c
  27. 1 1
      arch/x86/cpu/sc520/sc520_pci.c
  28. 1 1
      arch/x86/cpu/sc520/sc520_reset.c
  29. 1 1
      arch/x86/cpu/sc520/sc520_ssi.c
  30. 1 1
      arch/x86/cpu/sc520/sc520_timer.c
  31. 1 1
      arch/x86/cpu/start.S
  32. 1 1
      arch/x86/cpu/start16.S
  33. 1 1
      arch/x86/cpu/u-boot.lds
  34. 1 1
      arch/x86/include/asm/i8254.h
  35. 1 1
      arch/x86/include/asm/i8259.h
  36. 1 1
      arch/x86/include/asm/ibmpc.h
  37. 1 1
      arch/x86/include/asm/ic/pci.h
  38. 1 1
      arch/x86/include/asm/ic/sc520.h
  39. 1 1
      arch/x86/include/asm/interrupt.h
  40. 1 1
      arch/x86/include/asm/pci.h
  41. 1 1
      arch/x86/include/asm/processor.h
  42. 1 1
      arch/x86/include/asm/realmode.h
  43. 1 1
      arch/x86/include/asm/u-boot-x86.h
  44. 1 1
      arch/x86/include/asm/zimage.h
  45. 1 1
      arch/x86/lib/bios.S
  46. 1 1
      arch/x86/lib/bios.h
  47. 1 1
      arch/x86/lib/bios_pci.S
  48. 1 1
      arch/x86/lib/bios_setup.c
  49. 1 1
      arch/x86/lib/board.c
  50. 2 2
      arch/x86/lib/interrupts.c
  51. 1 1
      arch/x86/lib/pcat_interrupts.c
  52. 1 1
      arch/x86/lib/pcat_timer.c
  53. 1 1
      arch/x86/lib/pci.c
  54. 1 1
      arch/x86/lib/pci_type1.c
  55. 1 1
      arch/x86/lib/realmode.c
  56. 1 1
      arch/x86/lib/realmode_switch.S
  57. 1 1
      arch/x86/lib/timer.c
  58. 1 1
      arch/x86/lib/video.c
  59. 1 1
      arch/x86/lib/video_bios.c
  60. 1 1
      arch/x86/lib/zimage.c
  61. 1 1
      board/LEOX/elpt860/README.LEOX
  62. 15 15
      board/Marvell/common/memory.c
  63. 1 1
      board/RPXClassic/RPXClassic.c
  64. 1 1
      board/RPXClassic/eccx.c
  65. 1 1
      board/RPXClassic/flash.c
  66. 1 1
      board/eNET/Makefile
  67. 1 1
      board/eNET/eNET_pci.c
  68. 1 1
      board/hymod/hymod.c
  69. 37 37
      board/lwmon/README.keybd
  70. 1 1
      board/lwmon/lwmon.c
  71. 1 1
      board/mpl/common/pci_parts.h
  72. 1 1
      common/cmd_fdos.c
  73. 1 1
      doc/README.RPXClassic
  74. 1 1
      doc/README.m5373evb
  75. 1 1
      doc/README.mpc7448hpc2
  76. 1 1
      drivers/block/sata_sil3114.c
  77. 1 1
      drivers/block/sata_sil3114.h
  78. 1 1
      drivers/misc/ali512x.c
  79. 1 1
      drivers/pcmcia/ti_pci1410a.c
  80. 1 1
      drivers/rtc/s3c24x0_rtc.c
  81. 10 10
      drivers/video/ct69000.c
  82. 1 1
      drivers/video/sed13806.c
  83. 1 1
      drivers/video/sm501.c
  84. 1 1
      fs/fdos/Makefile
  85. 1 1
      fs/fdos/dev.c
  86. 1 1
      fs/fdos/dos.h
  87. 1 1
      fs/fdos/fat.c
  88. 1 1
      fs/fdos/fdos.c
  89. 1 1
      fs/fdos/fdos.h
  90. 1 1
      fs/fdos/fs.c
  91. 1 1
      fs/fdos/subdir.c
  92. 1 1
      fs/fdos/vfat.c
  93. 1 1
      include/ali512x.h
  94. 2 2
      include/configs/sc3.h
  95. 1 1
      include/fdc.h
  96. 1 1
      include/linux/mtd/mtd.h
  97. 1 1
      include/sed13806.h
  98. 1 1
      include/sm501.h
  99. 1 1
      lib/lzma/history.txt
  100. 1 1
      nand_spl/board/amcc/bamboo/sdram.c

+ 5 - 5
MAINTAINERS

@@ -74,7 +74,7 @@ Joe D'Abbraccio <ljd015@freescale.com>
 
 	MPC837xERDB	MPC837x
 
-Kári Davíðsson <kd@flaga.is>
+Kári Davíðsson <kd@flaga.is>
 
 	FLAGADM		MPC823
 
@@ -601,7 +601,7 @@ Rishi Bhattacharya <rishi@ti.com>
 
 	omap5912osk	ARM926EJS
 
-Andreas Bießmann <andreas.devel@gmail.com>
+Andreas Bießmann <andreas.devel@gmail.com>
 
 	at91rm9200ek	at91rm9200
 	grasshopper	avr32
@@ -664,7 +664,7 @@ Simon Guinot <simon.guinot@sequanux.org>
 	netspace_v2	ARM926EJS (Kirkwood SoC)
 	netspace_max_v2	ARM926EJS (Kirkwood SoC)
 
-Marius Gröger <mag@sysgo.de>
+Marius Gröger <mag@sysgo.de>
 
 	impa7		ARM720T (EP7211)
 	ep7312		ARM720T (EP7312)
@@ -752,7 +752,7 @@ Nishanth Menon <nm@ti.com>
 	omap3_sdp3430	ARM ARMV7 (OMAP3xx SoC)
 	omap3_zoom1	ARM ARMV7 (OMAP3xx SoC)
 
-David Müller <d.mueller@elsoft.ch>
+David Müller <d.mueller@elsoft.ch>
 
 	smdk2410	ARM920T
 	VCMA9		ARM920T
@@ -910,7 +910,7 @@ Richard Woodruff <r-woodruff2@ti.com>
 
 	omap2420h4	ARM1136EJS
 
-Alex Züpke <azu@sysgo.de>
+Alex Züpke <azu@sysgo.de>
 
 	lart		SA1100
 	dnp1110		SA1110

+ 2 - 2
arch/arm/cpu/arm1136/start.S

@@ -3,8 +3,8 @@
  *
  *  Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij <kshitij@ti.com>

+ 2 - 2
arch/arm/cpu/arm720t/start.S

@@ -1,8 +1,8 @@
 /*
  *  armboot - Startup Code for ARM720 CPU-core
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 2 - 2
arch/arm/cpu/arm920t/start.S

@@ -1,8 +1,8 @@
 /*
  *  armboot - Startup Code for ARM920 CPU-core
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *
  * See file CREDITS for list of people who contributed to this

+ 2 - 2
arch/arm/cpu/arm925t/start.S

@@ -5,8 +5,8 @@
  *
  *  ----- Adapted for OMAP1510 from ARM920 code ------
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij	 <kshitij@ti.com>

+ 2 - 2
arch/arm/cpu/arm926ejs/omap/reset.S

@@ -5,8 +5,8 @@
  *
  *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij <kshitij@ti.com>

+ 2 - 2
arch/arm/cpu/arm926ejs/start.S

@@ -5,8 +5,8 @@
  *
  *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij <kshitij@ti.com>

+ 2 - 2
arch/arm/cpu/arm926ejs/versatile/reset.S

@@ -5,8 +5,8 @@
  *
  *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij <kshitij@ti.com>

+ 2 - 2
arch/arm/cpu/arm946es/start.S

@@ -5,8 +5,8 @@
  *
  *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij <kshitij@ti.com>

+ 2 - 2
arch/arm/cpu/arm_intcm/start.S

@@ -5,8 +5,8 @@
  *
  *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
  *  Copyright (c) 2003	Kshitij <kshitij@ti.com>

+ 7 - 7
arch/arm/cpu/ixp/npe/include/IxAtmdAccCtrl.h

@@ -975,7 +975,7 @@ typedef struct
     * @li 1 - Generate HEC.
     * @li 0 - Disable HEC generation.
     */
-    unsigned int txCOSET:1;    /**< [24] If enabled the HEC is Exclusive-ORÆed with the value 0x55 before
+    unsigned int txCOSET:1;    /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before
   * being presented on the Utopia bus.
   * @li 1 - Enable HEC ExOR with value 0x55
   * @li 0 - Use generated HEC value.
@@ -1302,7 +1302,7 @@ typedef struct
     @li 1 - HEC checking enabled
     @li 0 - HEC checking disabled */
 
-    unsigned int rxCOSET:1;  /**< [25] If enabled the HEC is Exclusive-ORÆed with the value 0x55
+    unsigned int rxCOSET:1;  /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55
   before being tested with the received HEC.
   @li 1 - Enable HEC ExOR with value 0x55.
     @li 0 - Use generated HEC value.*/
@@ -1320,9 +1320,9 @@ typedef struct
 
     unsigned int rxHashEnbGFC:1;      /**< [15] Specifies if the VPI field [11:8]/GFC field should be
       included in the Hash data input or if the bits should be padded
-      with 1Æb0.
+      with 1'b0.
       @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation.
-      @li 0 - VPI [11:8]/GFC field padded with 1Æb0 */
+      @li 0 - VPI [11:8]/GFC field padded with 1'b0 */
 
     unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the
  incoming cell data should be pre-hashed to allow VPI/VCI header look-up
@@ -1489,10 +1489,10 @@ typedef struct
     unsigned int invalidSizeOvrInt:1;   /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount
      register overflows.
      @li 1 - CBI Receive Status Condition asserted.
-      @li¸0 - No CBI Receive Status asserted */
+     @li 0 - No CBI Receive Status asserted */
 
     unsigned int rxIdleOvrInt:1;      /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows.
-      @li    1 - CBI Receive Condition asserted.
+      @li 1 - CBI Receive Condition asserted.
       @li 0 - No CBI Receive Condition asserted */
 
     unsigned int reserved_2:3;    /**< [7:5] These bits are always 0 */
@@ -1679,7 +1679,7 @@ typedef struct
     unsigned int txReset:1;   /**< [25] Resets the Utopia Coprocessor transmit module to a known state.
     * @li Note: All transmit configuration and status registers will be reset
     * to their reset values.
-    * @li 0 - Normal operating mode¸
+    * @li 0 - Normal operating mode
     * @li 1 - Reset transmit modules
     */
 

+ 3 - 3
arch/arm/cpu/ixp/npe/include/IxOsal.h

@@ -250,7 +250,7 @@ PUBLIC void ixOsalIrqUnlock (UINT32 irqEnable);
  *
  * @brief Selectively disables interrupts
  *
- * @param irqLevel ­ new interrupt level
+ * @param irqLevel - new interrupt level
  *
  * Disables the interrupts below the specified interrupt level 
  * 
@@ -269,7 +269,7 @@ PUBLIC UINT32 ixOsalIrqLevelSet (UINT32 irqLevel);
  *
  * @brief Enables an interrupt level
  *
- * @param irqLevel ­ interrupt level to enable
+ * @param irqLevel - interrupt level to enable
  *
  * Enables the specified interrupt level
  *
@@ -285,7 +285,7 @@ PUBLIC void ixOsalIrqEnable (UINT32 irqLevel);
  *
  * @brief Disables an interrupt level
  *
- * @param irqLevel ­ interrupt level to disable
+ * @param irqLevel - interrupt level to disable
  *
  * Disables the specified interrupt level
  *

+ 2 - 2
arch/arm/cpu/lh7a40x/start.S

@@ -1,8 +1,8 @@
 /*
  *  armboot - Startup Code for ARM920 CPU-core
  *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Marius GrĂśger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex ZĂźpke <azu@sysgo.de>
  *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
arch/arm/cpu/sa1100/start.S

@@ -4,7 +4,7 @@
  *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
  *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
  *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
- *  Copyright (c) 2001	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2001	Alex Züpke <azu@sysgo.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/arm/include/asm/arch-s3c24x0/s3c2400.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/arm/include/asm/arch-s3c24x0/s3c2410.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/arm/include/asm/arch-s3c24x0/s3c24x0.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/powerpc/cpu/mpc8260/cpu_init.c

@@ -182,7 +182,7 @@ void cpu_init_f (volatile immap_t * immr)
 #endif
 
 	/* now restrict to preliminary range */
-	/* the PS came from the HRCW, don´t change it */
+	/* the PS came from the HRCW, don't change it */
 	memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
 	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
 

+ 1 - 1
arch/sparc/cpu/leon3/usb_uhci.c

@@ -20,7 +20,7 @@
  *
  * Adapted for U-Boot:
  * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
- * (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
+ * (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
  *     Added AMBA Plug&Play detection of GRUSB, modified interrupt handler.
  *     Added cache flushes where needed.
  *

+ 1 - 1
arch/x86/cpu/Makefile

@@ -3,7 +3,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2002
-# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

+ 1 - 1
arch/x86/cpu/config.mk

@@ -1,6 +1,6 @@
 #
 # (C) Copyright 2002
-# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

+ 1 - 1
arch/x86/cpu/cpu.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * (C) Copyright 2002
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>

+ 2 - 2
arch/x86/cpu/interrupts.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * Portions of this file are derived from the Linux kernel source
  *  Copyright (C) 1991, 1992  Linus Torvalds
@@ -246,7 +246,7 @@ void irq_llsr(struct irq_regs *regs)
 {
 	/*
 	 * For detailed description of each exception, refer to:
-	 * Intel® 64 and IA-32 Architectures Software Developer's Manual
+	 * Intel® 64 and IA-32 Architectures Software Developer's Manual
 	 * Volume 1: Basic Architecture
 	 * Order Number: 253665-029US, November 2008
 	 * Table 6-1. Exceptions and Interrupts

+ 1 - 1
arch/x86/cpu/resetvec.S

@@ -2,7 +2,7 @@
  *  U-boot - x86 Startup Code
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/sc520/Makefile

@@ -6,7 +6,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2002
-# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

+ 1 - 1
arch/x86/cpu/sc520/sc520.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/sc520/sc520_pci.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/sc520/sc520_reset.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/sc520/sc520_ssi.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/sc520/sc520_timer.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/start.S

@@ -5,7 +5,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/start16.S

@@ -5,7 +5,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002,2003
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/cpu/u-boot.lds

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/i8254.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/i8259.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/ibmpc.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/ic/pci.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/ic/sc520.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/interrupt.h

@@ -3,7 +3,7 @@
  * Graeme Russ, graeme.russ@gmail.com
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/pci.h

@@ -2,7 +2,7 @@
 
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/processor.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/realmode.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/u-boot-x86.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/include/asm/zimage.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/bios.S

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/bios.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/bios_pci.S

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/bios_setup.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/board.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * (C) Copyright 2002
  * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>

+ 2 - 2
arch/x86/lib/interrupts.c

@@ -12,7 +12,7 @@
  * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * (C) Copyright 2001
  * Josh Huber, Mission Critical Linux, Inc, <huber@mclx.com>
@@ -43,7 +43,7 @@
  * Daniel Hellstrom, Detlev Zundel, Wolfgang Denk and Josh Huber are
  * credited for the corresponding work on those ports. The original
  * interrupt handling routines for the x86 port were written by
- * Daniel Engström
+ * Daniel Engström
  */
 
 #include <common.h>

+ 1 - 1
arch/x86/lib/pcat_interrupts.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/pcat_timer.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/pci.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/pci_type1.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/realmode.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/realmode_switch.S

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/timer.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/video.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/video_bios.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
arch/x86/lib/zimage.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
board/LEOX/elpt860/README.LEOX

@@ -386,7 +386,7 @@ TCP: Hash tables configured (established 1024 bind 1024)
 IP-Config: Incomplete network configuration information.
 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 VFS: Mounted root (ext2 filesystem).
-Freeing unused kernel memory: 44k iné
+Freeing unused kernel memory: 44k init
 init started:  BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname
 Configuring lo...
 Configuring eth0...

+ 15 - 15
board/Marvell/common/memory.c

@@ -35,7 +35,7 @@
 /*******************************************************************************
 * memoryGetBankBaseAddress - Returns the base address of a memory bank.
 * DESCRIPTION:
-*       This function returns the base address of one of the SDRAMs memory
+*       This function returns the base address of one of the SDRAM's memory
 *       banks. There are 4 memory banks and each one represents one DIMM side.
 * INPUT:
 *       MEMORY_BANK bank - Selects one of the four banks as defined in Memory.h.
@@ -366,8 +366,8 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
 *       This function sets new base and size for one the memory banks
 *       (CS0 - CS3). It is the programmer`s responsibility to make sure that
 *       there are no conflicts with other memory spaces. When two memory spaces
-*       overlap, the MVs behavior is not defined .If a bank needs to be closed,
-*       set the ’bankLength’ parameter size to 0x0.
+*       overlap, the MV's behavior is not defined .If a bank needs to be closed,
+*       set the 'bankLength' parameter size to 0x0.
 *
 * INPUT:
 *       bank      - One of the memory banks (CS0-CS3) as defined in gtMemory.h.
@@ -375,7 +375,7 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
 *       bankLength  - The memory bank size. This function will decrement the
 *                   'bankLength' parameter by one and then check if the size is
 *                   valid. A valid size must be programed from LSB to MSB as
-*                   sequence of ‘1’s followed by sequence of ‘0’s.
+*                   sequence of '1's followed by sequence of '0's.
 *                   To close a memory window simply set the size to 0.
 *      NOTE!!!
 *       The size must be in 64Kbyte granularity.
@@ -487,7 +487,7 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
 *       This function sets new base and size for one the device windows
 *       (DEV_CS0 - DEV_CS3). It is the programmer`s responsibility to make sure
 *       that there are no conflicts with other memory spaces. When two memory
-*       spaces overlap, the MVs behavior is not defined .If a device window
+*       spaces overlap, the MV's behavior is not defined .If a device window
 *       needs to be closed, set the 'deviceLength' parameter size to 0x0.
 *
 * INPUT:
@@ -497,8 +497,8 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
 *       deviceLength - The device window size. This function will decrement
 *                          the 'deviceLength' parameter by one and then
 *                          check if the size is valid. A valid size must be
-*                          programed from LSB to MSB as sequence of ‘1’s
-*                          followed by sequence of ‘0’s.
+*                          programed from LSB to MSB as sequence of '1's
+*                          followed by sequence of '0's.
 *                          To close a memory window simply set the size to 0.
 *
 *      NOTE!!!
@@ -604,7 +604,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
 *       This function sets new base and size for one the PCI windows
 *       (PCI memory0/1/2..). It is the programmer`s responsibility to make sure
 *       that there are no conflicts with other memory spaces. When two memory
-*       spaces overlap, the MV’s behavior is not defined .If a PCI window
+*       spaces overlap, the MV's behavior is not defined. If a PCI window
 *       needs to be closed, set the 'pciWindowSize' parameter size to 0x0.
 *
 * INPUT:
@@ -613,7 +613,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
 *       pciWindowSize - The PCI window size. This function will decrement the
 *                       'pciWindowSize' parameter by one and then check if the
 *                       size is valid. A valid size must be programed from LSB
-*                       to MSB as sequence of ‘1’s followed by sequence of ‘0’s.
+*                       to MSB as sequence of '1's followed by sequence of '0's.
 *                       To close a memory window simply set the size to 0.
 *
 *      NOTE!!!
@@ -718,14 +718,14 @@ bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
 *                                  registers memory space.
 *
 * DESCRIPTION:
-*       This function set new base address for the internal registers memory
+*       This function set new base address for the internal registers memory
 *       space (the size is fixed and cannot be modified). The function does not
 *       handle overlapping with other memory spaces, it is the programer's
 *       responsibility to ensure that overlapping does not occur.
-*       When two memory spaces overlap, the MVs behavior is not defined.
+*       When two memory spaces overlap, the MV's behavior is not defined.
 *
 * INPUT:
-*       internalRegBase - new base address for the internal registers memory
+*       internalRegBase - new base address for the internal registers memory
 *                         space.
 *
 * OUTPUT:
@@ -762,7 +762,7 @@ bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
 *                                     address.
 *
 * DESCRIPTION:
-*       This function returns the base address of  the internal registers
+*       This function returns the base address of  the internal registers
 *       memory space .
 *
 * INPUT:
@@ -772,7 +772,7 @@ bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
 *       None.
 *
 * RETURN:
-*       32 bit base address of the internal registers memory space.
+*       32 bit base address of the internal registers memory space.
 *
 *******************************************************************************/
 unsigned int memoryGetInternalRegistersSpace (void)
@@ -874,7 +874,7 @@ void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress)
 *       regionSize  - The region's size. This function will decrement the
 *                     'regionSize' parameter by one and then check if the size
 *                     is valid. A valid size must be programed from LSB to MSB
-*                     as sequence of ‘1’s followed by sequence of ‘0’s.
+*                     as sequence of '1's followed by sequence of '0's.
 *                     To close a memory window simply set the size to 0.
 *
 *      NOTE!!!

+ 1 - 1
board/RPXClassic/RPXClassic.c

@@ -1,6 +1,6 @@
 /*
  * (C)	Copyright 2001
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  * U-Boot port on RPXClassic LF (CLLF_BW31) board
  *

+ 1 - 1
board/RPXClassic/eccx.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
board/RPXClassic/flash.c

@@ -1,6 +1,6 @@
 /*
  * (C)  Copyright 2001
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  * U-Boot port on RPXClassic LF (CLLF_BW31) board
  *

+ 1 - 1
board/eNET/Makefile

@@ -6,7 +6,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2002
-# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

+ 1 - 1
board/eNET/eNET_pci.c

@@ -3,7 +3,7 @@
  * Graeme Russ, <graeme.russ@gmail.com>
  *
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
board/hymod/hymod.c

@@ -378,7 +378,7 @@ initdram (int board_type)
 	 *
 	 * "At system reset, initialization software must set up the
 	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are conÞgured,
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
 	 *  system software should execute the following initialization sequence
 	 *  for each SDRAM device.
 	 *

+ 37 - 37
board/lwmon/README.keybd

@@ -5,44 +5,44 @@ Die Implementierung / Decodierung beruht auf den Angaben aus dem  Do-
 kument  "PIC LWE-Tastatur" in der Fassung vom 9. 3. 2001, insbesonde-
 re Tabelle 3 im Kapitel 4.3 Tastencodes. In  U-Boot  werden  die  vom
 Keyboard-Controller  gelesenen Daten hexadezimal codiert in der auto-
-matisch angelegten Environment-Variablen "keybd" übergeben. Ist  kei-
-ne Taste gedrückt worden, steht dort:
+matisch angelegten Environment-Variablen "keybd" übergeben. Ist  kei-
+ne Taste gedrückt worden, steht dort:
 
 	keybd=000000000000000000
 
 Der decodierte Tastencode ("keybd") kann mit den  "bootargs"  an  den
-Linux-Kernel  übergeben  und  dort z. B. in einem Device-Treiber oder
+Linux-Kernel  übergeben  und  dort z. B. in einem Device-Treiber oder
 einer Applikation ausgewertet werden.
 
 
 Sonderfunktionen beim Booten:
 
 Es lassen sich eine oder mehrere (beliebig viele) Tasten oder Tasten-
-kombinationen definieren, die Sonderfunktionen auslösen,  wenn  diese
-Tasten beim Booten (Reset) gedrückt sind.
+kombinationen definieren, die Sonderfunktionen auslösen,  wenn  diese
+Tasten beim Booten (Reset) gedrückt sind.
 
 Wird eine eingestellte Taste bzw. Tastenkombination erkannt, so  wird
 in  U-Boot noch vor dem Start des "Countdown" und somit vor jedem an-
 deren Kommando der Inhalt einer dieser Taste  bzw.  Tastenkombination
-zugeordneten Environment-Variablen ausführen.
+zugeordneten Environment-Variablen ausführen.
 
 
 Die Environment-Variable "magic_keys" wird als Liste von Zeichen ver-
-standen, die als Suffix an den Namen "key_magic" angefügt werden  und
+standen, die als Suffix an den Namen "key_magic" angefügt werden  und
 so  die  Namen  der  Environment-Variablen  definieren, mit denen die
 Tasten (-kombinationen) festgelegt werden:
 
 Ist "magic_keys" NICHT definiert, so wird nur die in der Environment-
-Variablen "key_magic" codierte  Tasten  (-kombination)  geprüft,  und
-ggf.  der  Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge-
+Variablen "key_magic" codierte  Tasten  (-kombination)  geprüft,  und
+ggf.  der  Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge-
 nauer: der Inhalt von "key_cmd" wird der Variablen "preboot" zugewie-
-sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando-
+sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando-
 interpretation beginnt).
 
-Enthält "magic_keys" z. B.  die  Zeichenkette  "0123CB*",  so  werden
-nacheinander folgende Aktionen ausgeführt:
+Enthält "magic_keys" z. B.  die  Zeichenkette  "0123CB*",  so  werden
+nacheinander folgende Aktionen ausgeführt:
 
-	prüfe Tastencode	ggf. führe aus Kommando
+	prüfe Tastencode	ggf. führe aus Kommando
 	in Variable		in Variable
 	-----------------------------------
 	key_magic0	==>	key_cmd0
@@ -55,43 +55,43 @@ nacheinander folgende Aktionen ausgef
 	key_magic*	==>	key_cmd*
 
 Hinweis: sobald ein aktivierter Tastencode erkannt  wurde,  wird  die
-Bearbeitung  abgebrochen; es wird daher höchstens eines der definier-
-ten Kommandos ausgeführt, wobei die Priorität durch  die  Suchreihen-
+Bearbeitung  abgebrochen; es wird daher höchstens eines der definier-
+ten Kommandos ausgeführt, wobei die Priorität durch  die  Suchreihen-
 folge  festgelegt wird, also durch die Reihenfolge der Zeichen in der
 Varuiablen "magic_keys".
 
 
-Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um
-eine Funktion auszulösen, erfolgt nach der Tastaturtabelle.
+Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um
+eine Funktion auszulösen, erfolgt nach der Tastaturtabelle.
 
 Die Definitionen
 
 	=> setenv key_magic0 3a+3b
 	=> setenv key_cmd0 setenv bootdelay 30
 
-bedeuten dementsprechend, daß die Tasten mit den  Codes  0x3A  (Taste
-"F1")  und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie
-können dort eine beliebige  Tastenkombination  eintragen  (jeweils  2
-Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen).
+bedeuten dementsprechend, daß die Tasten mit den  Codes  0x3A  (Taste
+"F1")  und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie
+können dort eine beliebige  Tastenkombination  eintragen  (jeweils  2
+Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen).
 
 Wird die eingestellte Tastenkombination erkannt, so  wird  in  U-Boot
 noch  vor  dem Start des "Countdown" und somit vor jedem anderen Kom-
-mando das angebene Kommando ausgeführt und  somit  ein  langes  Boot-
+mando das angebene Kommando ausgeführt und  somit  ein  langes  Boot-
 Delay eingetragen.
 
-Praktisch könnten Sie also in U-Boot "bootdelay"  auf  0  setzen  und
-somit  stets  ohne  jede  User-Interaktion automatisch booten, außer,
-wenn die beiden Tasten "F1" und "F2"  beim  Booten  gedrückt  werden:
-dann würde ein Boot-Delay von 30 Sekunden eingefügt.
+Praktisch könnten Sie also in U-Boot "bootdelay"  auf  0  setzen  und
+somit  stets  ohne  jede  User-Interaktion automatisch booten, außer,
+wenn die beiden Tasten "F1" und "F2"  beim  Booten  gedrückt  werden:
+dann würde ein Boot-Delay von 30 Sekunden eingefügt.
 
 
 Hinweis: dem Zeichen '#' kommt innerhalb von "magic_keys" eine beson-
 dere Bedeutung zu: die dadurch definierte  Key-Sequenz  schaltet  den
-Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite-
-ren  Meldungen  von  U-Boot  über  das LCD-Display ausgegeben werden;
-außerdem kann man durch das mit dieser  Tastenkombination  verknüpfte
+Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite-
+ren  Meldungen  von  U-Boot  über  das LCD-Display ausgegeben werden;
+außerdem kann man durch das mit dieser  Tastenkombination  verknüpfte
 Kommando  z. B. die Linux-Bootmeldungen ebenfalls auf das LCD-Display
-legen, so daß der Boot-Vorgang direkt und  ohne  weitere  Hilfsmittel
+legen, so daß der Boot-Vorgang direkt und  ohne  weitere  Hilfsmittel
 analysiert werden kann.
 
 Beispiel:
@@ -107,20 +107,20 @@ chert:
 (6)	=> setenv bootcmd bootp\;run nfsargs\;run addip\;run addfb\;bootm
 
 Hierbei wird die Linux Commandline (in der Variablen  "bootargs")  im
-Boot-Kommando  "bootcmd"  (6)  schrittweise zusammengesetzt: zunächst
-werden die für Root-Filesystem über NFS erforderlichen  Optionen  ge-
+Boot-Kommando  "bootcmd"  (6)  schrittweise zusammengesetzt: zunächst
+werden die für Root-Filesystem über NFS erforderlichen  Optionen  ge-
 setzt  ("run  nfsargs", vgl. (3)), dann die Netzwerkkonfiguration an-
-gefügt ("run addip", vgl. (4)),  und  schließlich  die  Systemconsole
+gefügt ("run addip", vgl. (4)),  und  schließlich  die  Systemconsole
 definiert ("run addfb").
 
 Dabei wird im Normalfall die Definition (5)  verwendt;  wurde  aller-
-dings  beim  Reset die entsprechende Taste gedrückt gehalten, so wird
-diese Definition bei der Ausführung des in (2) definierten  Kommandos
-überschrieben,  so  daß  Linux die Bootmeldungen auch über das Frame-
+dings  beim  Reset die entsprechende Taste gedrückt gehalten, so wird
+diese Definition bei der Ausführung des in (2) definierten  Kommandos
+überschrieben,  so  daß  Linux die Bootmeldungen auch über das Frame-
 buffer-Device (=LCD-Display) ausgibt.
 
 Beachten Sie die Verdoppelung der '\'-Escapes in der  Definition  von
 "key_cmd#" - diese ist erforderlich, weil der String _zweimal_ inter-
 pretiert  wird:  das  erste  Mal  bei der Eingabe von "key_cmd#", das
-zweite Mal, wenn der String (als  Inhalt  von  "preboot")  ausgeführt
+zweite Mal, wenn der String (als  Inhalt  von  "preboot")  ausgeführt
 wird.

+ 1 - 1
board/lwmon/lwmon.c

@@ -365,7 +365,7 @@ int board_early_init_f (void)
 	 *
 	 * This is just a preliminary fix, intended to turn off TENA
 	 * as soon as possible to avoid noise on the network. Once
-	 * I²C is running we will make sure the interface is
+	 * I2C is running we will make sure the interface is
 	 * correctly initialized.
 	 */
 	immr->im_cpm.cp_pbpar &= ~PB_ENET_TENA;

+ 1 - 1
board/mpl/common/pci_parts.h

@@ -63,7 +63,7 @@
 
 /* Mapping:
  * +-------------+------------+------------+--------------------------------+
- * ¦ PCI MemAddr | PCI IOAddr | Local Addr | Device / Function              |
+ * | PCI MemAddr | PCI IOAddr | Local Addr | Device / Function              |
  * +-------------+------------+------------+--------------------------------+
  * |  0x00000000 |            | 0xA0000000 | ISA Memory (hard wired)        |
  * |  0x00FFFFFF |            | 0xA0FFFFFF |                                |

+ 1 - 1
common/cmd_fdos.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
doc/README.RPXClassic

@@ -1,7 +1,7 @@
 # Porting U-Boot onto RPXClassic LF_BW31 board
 # Written by Pierre AUBERT
 # E-Mail  p.aubert@staubli.com
-# Stäubli Faverges - <www.staubli.com>
+# Stäubli Faverges - <www.staubli.com>
 #
 # Sept. 20 2001
 #

+ 1 - 1
doc/README.m5373evb

@@ -279,7 +279,7 @@ usbcore: registered new device driver usb
 NET: Registered protocol family 2
 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
-JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
+JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
 io scheduler noop registered
 io scheduler cfq registered (default)
 ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART

+ 1 - 1
doc/README.mpc7448hpc2

@@ -8,7 +8,7 @@ design, which is optimized for high speed throughput between the processor and
 the memory, disk drive and Ethernet port subsystems.
 
 MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
-used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
+used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
 chassis.
 
 Building U-Boot

+ 1 - 1
drivers/block/sata_sil3114.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
+ * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
  * Author: Tor Krill <tor@excito.com>
  *
  * This program is free software; you can redistribute it and/or

+ 1 - 1
drivers/block/sata_sil3114.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
+ * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
  * Author: Tor Krill <tor@excito.com>
  *
  * This program is free software; you can redistribute it and/or

+ 1 - 1
drivers/misc/ali512x.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
drivers/pcmcia/ti_pci1410a.c

@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB
+ * Daniel Engström, Omicron Ceti AB
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 1 - 1
drivers/rtc/s3c24x0_rtc.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2003
- * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
+ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 10 - 10
drivers/video/ct69000.c

@@ -1,5 +1,5 @@
 /* ported from ctfb.c (linux kernel):
- * Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de>
+ * Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de>
  *
  * Ported to U-Boot:
  * (C) Copyright 2002 Denis Peter, MPL AG Switzerland
@@ -626,25 +626,25 @@ FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
 
 /* that is the hardware < 69000 we have to manage
  +---------+  +-------------------+  +----------------------+  +--+
- | REFCLK  |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|÷N|__
- | 14.3MHz |  |(NTSCDS) (÷1, ÷5)  |  |Select (RDS) (÷1, ÷4) |  |  |  |
+ | REFCLK  |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|÷N|__
+ | 14.3MHz |  |(NTSCDS) (÷1, ÷5)  |  |Select (RDS) (÷1, ÷4) |  |  |  |
  +---------+  +-------------------+  +----------------------+  +--+  |
   ___________________________________________________________________|
  |
  |                                    fvco                      fout
  | +--------+  +------------+  +-----+     +-------------------+   +----+
  +-| Phase  |__|Charge Pump |__| VCO |_____|Post Divisor (PD)  |___|CLK |--->
- +-| Detect |  |& Filter VCO|  |     |  |  |÷1, 2, 4, 8, 16, 32|   |    |
+ +-| Detect |  |& Filter VCO|  |     |  |  |÷1, 2, 4, 8, 16, 32|   |    |
  | +--------+  +------------+  +-----+  |  +-------------------+   +----+
  |                                      |
  |    +--+   +---------------+          |
- |____|÷M|___|VCO Loop Divide|__________|
-      |  |   |(VLD)(÷4, ÷16) |
+ |____|÷M|___|VCO Loop Divide|__________|
+      |  |   |(VLD)(÷4, ÷16) |
       +--+   +---------------+
 ****************************************************************************
   that is the hardware >= 69000 we have to manage
  +---------+  +--+
- | REFCLK  |__|÷N|__
+ | REFCLK  |__|÷N|__
  | 14.3MHz |  |  |  |
  +---------+  +--+  |
   __________________|
@@ -652,12 +652,12 @@ FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
  |                                    fvco                      fout
  | +--------+  +------------+  +-----+     +-------------------+   +----+
  +-| Phase  |__|Charge Pump |__| VCO |_____|Post Divisor (PD)  |___|CLK |--->
- +-| Detect |  |& Filter VCO|  |     |  |  |÷1, 2, 4, 8, 16, 32|   |    |
+ +-| Detect |  |& Filter VCO|  |     |  |  |÷1, 2, 4, 8, 16, 32|   |    |
  | +--------+  +------------+  +-----+  |  +-------------------+   +----+
  |                                      |
  |    +--+   +---------------+          |
- |____|÷M|___|VCO Loop Divide|__________|
-      |  |   |(VLD)(÷1, ÷4)  |
+ |____|÷M|___|VCO Loop Divide|__________|
+      |  |   |(VLD)(÷1, ÷4)  |
       +--+   +---------------+
 
 

+ 1 - 1
drivers/video/sed13806.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
drivers/video/sm501.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * (C) Copyright 2005

+ 1 - 1
fs/fdos/Makefile

@@ -3,7 +3,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # (C) Copyright 2002
-# Stäubli Faverges - <www.staubli.com>
+# Stäubli Faverges - <www.staubli.com>
 # Pierre AUBERT  p.aubert@staubli.com
 #
 #

+ 1 - 1
fs/fdos/dev.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/dos.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/fat.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/fdos.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/fdos.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/fs.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/subdir.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
fs/fdos/vfat.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
include/ali512x.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
+ * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
  *
  * See file CREDITS for list of people who contributed to this
  * project.

+ 2 - 2
include/configs/sc3.h

@@ -532,9 +532,9 @@
 
 #define CONFIG_SYS_ISA_MEM_BASE_ADDRESS 0x78000000
 /*
- Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
+ Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
  Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
- das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
+ das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
  auf ISA- und PCI-Zyklen)
  */
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS  0xE8000000

+ 1 - 1
include/fdc.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
include/linux/mtd/mtd.h

@@ -115,7 +115,7 @@ struct mtd_info {
 	u_int32_t flags;
 	uint64_t size;	 /* Total size of the MTD */
 
-	/* "Major" erase size for the device. Naïve users may take this
+	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
 	 * information below if they desire
 	 */

+ 1 - 1
include/sed13806.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * See file CREDITS for list of people who contributed to this

+ 1 - 1
include/sm501.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Stäubli Faverges - <www.staubli.com>
+ * Stäubli Faverges - <www.staubli.com>
  * Pierre AUBERT  p.aubert@staubli.com
  *
  * (C) Copyright 2005

+ 1 - 1
lib/lzma/history.txt

@@ -41,7 +41,7 @@ HISTORY of the LZMA SDK
 
 4.57           2007-12-12
 -------------------------
-- Speed optimizations in Ñ++ LZMA Decoder.
+- Speed optimizations in Ñ++ LZMA Decoder.
 - Small changes for more compatibility with some C/C++ compilers.
 
 

+ 1 - 1
nand_spl/board/amcc/bamboo/sdram.c

@@ -79,7 +79,7 @@ phys_size_t initdram(int board_type)
 	mtsdram(SDRAM0_B0CR, 0x00082001);
 	mtsdram(SDRAM0_TR0, 0x41094012);
 	mtsdram(SDRAM0_TR1, 0x8080083d);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
-	mtsdram(SDRAM0_RTR, 0x04100000);	/* Interval 7.8µs @ 133MHz PLB	*/
+	mtsdram(SDRAM0_RTR, 0x04100000);	/* Interval 7.8µs @ 133MHz PLB	*/
 	mtsdram(SDRAM0_CFG1, 0x00000000);	/* Self-refresh exit, disable PM*/
 
 	/*