Browse Source

board: toradex: turn off lcd backlight before OS handover

U-Boot typically tears down the display controller before handing
control over to Linux. On LCD displays disabling pixel clock leads to a
fading out effect with vertical/horizontal lines. Make sure to disable
back light before booting Linux.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Gerard Salvatella 5 years ago
parent
commit
a3c9021771

+ 9 - 0
board/toradex/apalis-tk1/apalis-tk1.c

@@ -240,3 +240,12 @@ void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
 	}
 }
 #endif /* CONFIG_PCI_TEGRA */
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_request(TEGRA_GPIO(BB, 5), "BL_ON");
+	gpio_direction_output(TEGRA_GPIO(BB, 5), 0);
+}

+ 9 - 0
board/toradex/apalis_imx6/apalis_imx6.c

@@ -745,6 +745,15 @@ static void setup_display(void)
 	gpio_direction_output(RGB_BACKLIGHTPWM_OE, 0);
 	gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 }
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_direction_output(RGB_BACKLIGHTPWM_GP, 1);
+	gpio_direction_output(RGB_BACKLIGHT_GP, 0);
+}
 #endif /* defined(CONFIG_VIDEO_IPUV3) */
 
 int board_early_init_f(void)

+ 9 - 0
board/toradex/apalis_t30/apalis_t30.c

@@ -164,3 +164,12 @@ void tegra_pcie_board_port_reset(struct tegra_pcie_port *port)
 #endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */
 }
 #endif /* CONFIG_PCI_TEGRA */
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_request(TEGRA_GPIO(V, 2), "BKL1_ON");
+	gpio_direction_output(TEGRA_GPIO(V, 2), 0);
+}

+ 9 - 0
board/toradex/colibri_imx6/colibri_imx6.c

@@ -622,6 +622,15 @@ static void setup_display(void)
 	gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
 	gpio_direction_output(RGB_BACKLIGHT_GP, 1);
 }
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_direction_output(RGB_BACKLIGHTPWM_GP, 1);
+	gpio_direction_output(RGB_BACKLIGHT_GP, 0);
+}
 #endif /* defined(CONFIG_VIDEO_IPUV3) */
 
 int board_early_init_f(void)

+ 9 - 0
board/toradex/colibri_imx7/colibri_imx7.c

@@ -150,6 +150,15 @@ static int setup_lcd(void)
 }
 #endif
 
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_direction_output(GPIO_PWM_A, 1);
+	gpio_direction_output(GPIO_BL_ON, 0);
+}
+
 #ifdef CONFIG_FEC_MXC
 static iomux_v3_cfg_t const fec1_pads[] = {
 #ifndef CONFIG_COLIBRI_IMX7_EXT_PHYCLK

+ 9 - 0
board/toradex/colibri_t20/colibri_t20.c

@@ -150,4 +150,13 @@ void pin_mux_display(void)
 	pinmux_set_func(PMUX_PINGRP_SDC, PMUX_FUNC_PWM);
 	pinmux_tristate_disable(PMUX_PINGRP_SDC);
 }
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_request(TEGRA_GPIO(T, 4), "BL_ON");
+	gpio_direction_output(TEGRA_GPIO(T, 4), 0);
+}
 #endif

+ 9 - 0
board/toradex/colibri_t30/colibri_t30.c

@@ -66,3 +66,12 @@ void pin_mux_usb(void)
 	udelay(5);
 	gpio_set_value(TEGRA_GPIO(DD, 0), 1);
 }
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_request(TEGRA_GPIO(V, 2), "BL_ON");
+	gpio_direction_output(TEGRA_GPIO(V, 2), 0);
+}

+ 11 - 1
board/toradex/colibri_vf/colibri_vf.c

@@ -38,8 +38,9 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
 			PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
 
-#define USB_PEN_GPIO           83
+#define USB_PEN_GPIO		83
 #define USB_CDET_GPIO		102
+#define PTC0_GPIO_45		45
 
 static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
 	/* AXI */
@@ -632,3 +633,12 @@ int board_usb_phy_mode(int port)
 	}
 }
 #endif
+
+/*
+ * Backlight off before OS handover
+ */
+void board_preboot_os(void)
+{
+	gpio_request(PTC0_GPIO_45, "BL_ON");
+	gpio_direction_output(PTC0_GPIO_45, 0);
+}