Browse Source

Drop PCMCIA

This is no-longer used in U-Boot and has not been converted to driver
model. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass 4 years ago
parent
commit
9e5616dea9

+ 1 - 1
README

@@ -83,7 +83,7 @@ Where we come from:
   * Provide extended interface to Linux boot loader
   * S-Record download
   * network boot
-  * PCMCIA / CompactFlash / ATA disk / SCSI ... boot
+  * ATA disk / SCSI ... boot
 - create ARMBoot project (http://sourceforge.net/projects/armboot)
 - add other CPU families (starting with ARM)
 - create U-Boot project (http://sourceforge.net/projects/u-boot)

+ 0 - 8
cmd/Kconfig

@@ -1042,14 +1042,6 @@ config CMD_PCI
 	  peripherals. Sub-commands allow bus enumeration, displaying and
 	  changing configuration space and a few other features.
 
-config CMD_PCMCIA
-	bool "pinit - Set up PCMCIA device"
-	help
-	  Provides a means to initialise a PCMCIA (Personal Computer Memory
-	  Card International Association) device. This is an old standard from
-	  about 1990. These devices are typically removable memory or network
-	  cards using a standard 68-pin connector.
-
 config CMD_PINMUX
 	bool "pinmux - show pins muxing"
 	default y if PINCTRL

+ 0 - 1
cmd/Makefile

@@ -106,7 +106,6 @@ obj-$(CONFIG_CMD_PART) += part.o
 ifdef CONFIG_PCI
 obj-$(CONFIG_CMD_PCI) += pci.o
 endif
-obj-$(CONFIG_CMD_PCMCIA) += pcmcia.o
 obj-$(CONFIG_CMD_PINMUX) += pinmux.o
 obj-$(CONFIG_CMD_PXE) += pxe.o
 obj-$(CONFIG_CMD_WOL) += wol.o

+ 0 - 4
cmd/ide.c

@@ -17,10 +17,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 
-#if defined(CONFIG_IDE_PCMCIA)
-# include <pcmcia.h>
-#endif
-
 #include <ide.h>
 #include <ata.h>
 

+ 0 - 341
cmd/pcmcia.c

@@ -1,341 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- ********************************************************************
- *
- * Lots of code copied from:
- *
- * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
- * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
- *
- * "The ExCA standard specifies that socket controllers should provide
- * two IO and five memory windows per socket, which can be independently
- * configured and positioned in the host address space and mapped to
- * arbitrary segments of card address space. " - David A Hinds. 1999
- *
- * This controller does _not_ meet the ExCA standard.
- *
- * m8xx pcmcia controller brief info:
- * + 8 windows (attrib, mem, i/o)
- * + up to two slots (SLOT_A and SLOT_B)
- * + inputpins, outputpins, event and mask registers.
- * - no offset register. sigh.
- *
- * Because of the lacking offset register we must map the whole card.
- * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
- * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
- * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
- * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
- * They are maximum 64KByte each...
- */
-
-/* #define DEBUG	1	*/
-
-/*
- * PCMCIA support
- */
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <pcmcia.h>
-#include <asm/io.h>
-
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-extern int pcmcia_on (void);
-extern int pcmcia_off (void);
-
-int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int rcode = 0;
-
-	if (argc != 2) {
-		printf ("Usage: pinit {on | off}\n");
-		return 1;
-	}
-	if (strcmp(argv[1],"on") == 0) {
-		rcode = pcmcia_on ();
-	} else if (strcmp(argv[1],"off") == 0) {
-		rcode = pcmcia_off ();
-	} else {
-		printf ("Usage: pinit {on | off}\n");
-		return 1;
-	}
-
-	return rcode;
-}
-
-U_BOOT_CMD(
-	pinit,	2,	0,	do_pinit,
-	"PCMCIA sub-system",
-	"on  - power on PCMCIA socket\n"
-	"pinit off - power off PCMCIA socket"
-);
-
-#endif
-
-/* -------------------------------------------------------------------- */
-
-#undef	CHECK_IDE_DEVICE
-
-#if	defined(CONFIG_PXA_PCMCIA)
-#define	CHECK_IDE_DEVICE
-#endif
-
-#ifdef	CHECK_IDE_DEVICE
-
-int		ide_devices_found;
-static uchar	*known_cards[] = {
-	(uchar *)"ARGOSY PnPIDE D5",
-	NULL
-};
-
-#define	MAX_TUPEL_SZ	512
-#define MAX_FEATURES	4
-
-#define MAX_IDENT_CHARS		64
-#define	MAX_IDENT_FIELDS	4
-
-#define	indent	"\t   "
-
-static void print_funcid (int func)
-{
-	puts (indent);
-	switch (func) {
-		case CISTPL_FUNCID_MULTI:
-			puts (" Multi-Function");
-			break;
-		case CISTPL_FUNCID_MEMORY:
-			puts (" Memory");
-			break;
-		case CISTPL_FUNCID_SERIAL:
-			puts (" Serial Port");
-			break;
-		case CISTPL_FUNCID_PARALLEL:
-			puts (" Parallel Port");
-			break;
-		case CISTPL_FUNCID_FIXED:
-			puts (" Fixed Disk");
-			break;
-		case CISTPL_FUNCID_VIDEO:
-			puts (" Video Adapter");
-			break;
-		case CISTPL_FUNCID_NETWORK:
-			puts (" Network Adapter");
-			break;
-		case CISTPL_FUNCID_AIMS:
-			puts (" AIMS Card");
-			break;
-		case CISTPL_FUNCID_SCSI:
-			puts (" SCSI Adapter");
-			break;
-		default:
-			puts (" Unknown");
-			break;
-	}
-	puts (" Card\n");
-}
-
-static void print_fixed (volatile uchar *p)
-{
-	if (p == NULL)
-		return;
-
-	puts(indent);
-
-	switch (*p) {
-		case CISTPL_FUNCE_IDE_IFACE:
-		{   uchar iface = *(p+2);
-
-		puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
-		puts (" interface ");
-		break;
-		}
-		case CISTPL_FUNCE_IDE_MASTER:
-		case CISTPL_FUNCE_IDE_SLAVE:
-		{   uchar f1 = *(p+2);
-		uchar f2 = *(p+4);
-
-		puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
-
-		if (f1 & CISTPL_IDE_UNIQUE)
-			puts (" [unique]");
-
-		puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
-
-		if (f2 & CISTPL_IDE_HAS_SLEEP)
-			puts (" [sleep]");
-
-		if (f2 & CISTPL_IDE_HAS_STANDBY)
-			puts (" [standby]");
-
-		if (f2 & CISTPL_IDE_HAS_IDLE)
-			puts (" [idle]");
-
-		if (f2 & CISTPL_IDE_LOW_POWER)
-			puts (" [low power]");
-
-		if (f2 & CISTPL_IDE_REG_INHIBIT)
-			puts (" [reg inhibit]");
-
-		if (f2 & CISTPL_IDE_HAS_INDEX)
-			puts (" [index]");
-
-		if (f2 & CISTPL_IDE_IOIS16)
-			puts (" [IOis16]");
-
-		break;
-		}
-	}
-	putc ('\n');
-}
-
-static int identify  (volatile uchar *p)
-{
-	uchar id_str[MAX_IDENT_CHARS];
-	uchar data;
-	uchar *t;
-	uchar **card;
-	int i, done;
-
-	if (p == NULL)
-		return (0);	/* Don't know */
-
-	t = id_str;
-	done =0;
-
-	for (i=0; i<=4 && !done; ++i, p+=2) {
-		while ((data = *p) != '\0') {
-			if (data == 0xFF) {
-				done = 1;
-				break;
-			}
-			*t++ = data;
-			if (t == &id_str[MAX_IDENT_CHARS-1]) {
-				done = 1;
-				break;
-			}
-			p += 2;
-		}
-		if (!done)
-			*t++ = ' ';
-	}
-	*t = '\0';
-	while (--t > id_str) {
-		if (*t == ' ')
-			*t = '\0';
-		else
-			break;
-	}
-	puts ((char *)id_str);
-	putc ('\n');
-
-	for (card=known_cards; *card; ++card) {
-		debug ("## Compare against \"%s\"\n", *card);
-		if (strcmp((char *)*card, (char *)id_str) == 0) {	/* found! */
-			debug ("## CARD FOUND ##\n");
-			return (1);
-		}
-	}
-
-	return (0);	/* don't know */
-}
-
-int check_ide_device (int slot)
-{
-	volatile uchar *ident = NULL;
-	volatile uchar *feature_p[MAX_FEATURES];
-	volatile uchar *p, *start, *addr;
-	int n_features = 0;
-	uchar func_id = ~0;
-	uchar code, len;
-	ushort config_base = 0;
-	int found = 0;
-	int i;
-
-	addr = (volatile uchar *)(CONFIG_SYS_PCMCIA_MEM_ADDR +
-				  CONFIG_SYS_PCMCIA_MEM_SIZE * (slot * 4));
-	debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
-
-	start = p = (volatile uchar *) addr;
-
-	while ((p - start) < MAX_TUPEL_SZ) {
-
-		code = *p; p += 2;
-
-		if (code == 0xFF) { /* End of chain */
-			break;
-		}
-
-		len = *p; p += 2;
-#if defined(DEBUG) && (DEBUG > 1)
-		{ volatile uchar *q = p;
-			printf ("\nTuple code %02x  length %d\n\tData:",
-				code, len);
-
-			for (i = 0; i < len; ++i) {
-				printf (" %02x", *q);
-				q+= 2;
-			}
-		}
-#endif	/* DEBUG */
-		switch (code) {
-		case CISTPL_VERS_1:
-			ident = p + 4;
-			break;
-		case CISTPL_FUNCID:
-			/* Fix for broken SanDisk which may have 0x80 bit set */
-			func_id = *p & 0x7F;
-			break;
-		case CISTPL_FUNCE:
-			if (n_features < MAX_FEATURES)
-				feature_p[n_features++] = p;
-			break;
-		case CISTPL_CONFIG:
-			config_base = (*(p+6) << 8) + (*(p+4));
-			debug ("\n## Config_base = %04x ###\n", config_base);
-		default:
-			break;
-		}
-		p += 2 * len;
-	}
-
-	found = identify (ident);
-
-	if (func_id != ((uchar)~0)) {
-		print_funcid (func_id);
-
-		if (func_id == CISTPL_FUNCID_FIXED)
-			found = 1;
-		else
-			return (1);	/* no disk drive */
-	}
-
-	for (i=0; i<n_features; ++i) {
-		print_fixed (feature_p[i]);
-	}
-
-	if (!found) {
-		printf ("unknown card type\n");
-		return (1);
-	}
-
-	ide_devices_found |= (1 << slot);
-
-	/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
-	*((uchar *)(addr + config_base)) = 1;
-#if 0
-	printf("\n## Config_base = %04x ###\n", config_base);
-	printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
-	printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
-	printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
-	printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
-#endif
-	return (0);
-}
-
-#endif	/* CHECK_IDE_DEVICE */

+ 0 - 12
common/board_r.c

@@ -583,15 +583,6 @@ static int initr_post(void)
 }
 #endif
 
-#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE)
-static int initr_pcmcia(void)
-{
-	puts("PCMCIA:");
-	pcmcia_init();
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_IDE) && !defined(CONFIG_BLK)
 static int initr_ide(void)
 {
@@ -820,9 +811,6 @@ static init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_POST
 	initr_post,
 #endif
-#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE)
-	initr_pcmcia,
-#endif
 #if defined(CONFIG_IDE) && !defined(CONFIG_BLK)
 	initr_ide,
 #endif

+ 0 - 65
doc/README.marubun-pcmcia

@@ -1,65 +0,0 @@
-
-U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
-	Last update 21/11/2007 by Nobuhiro Iwamatsu
-
-========================================================================================
-
-0. What's this?
-    This driver supports MARUBUN MR-SHPC-01.
-	url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html
-	(Sorry Japanese only.)
-
-    This chip is used with SuperH well, and adopted by the
-    reference board.
-	ex. * MS7750SE01
-		* MS7722SE01
-		* other
-
-    This chip doesn't support CardBus.
-
-1. base source code
-    The code is based on sources from the Linux kernel
-	( arch/sh/kernel/cf-enabler.c ).
-
-2. How to use
-    The options you have to specify in the config file are (with the
-    value for my board as an example):
-
-    * CONFIG_MARUBUN_PCCARD
-	If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD.
-	ex.	#define CONFIG_MARUBUN_PCCARD
-
-    * CONFIG_PCMCIA_SLOT_A
-	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A .
-	ex.	#define CONFIG_PCMCIA_SLOT_A    1
-
-    * CONFIG_SYS_MARUBUN_MRSHPC
-	This is MR-SHPC-01 PCMCIA controller base address.
-	You should do the setting matched to your environment.
-	ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
-	     ( for MS7722SE01 environment )
-
-    * CONFIG_SYS_MARUBUN_MW1
-	This is MR-SHPC-01 memory window base address.
-	You should do the setting matched to your environment.
-	ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000
-	     ( for MS7722SE01 environment )
-
-    * CONFIG_SYS_MARUBUN_MW1
-	This is MR-SHPC-01 attribute window base address.
-	You should do the setting matched to your environment.
-	ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000
-	     ( for MS7722SE01 environment )
-
-    * CONFIG_SYS_MARUBUN_MW1
-	This is MR-SHPC-01 I/O window base address.
-	You should do the setting matched to your environment.
-	ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000
-	     ( for MS7722SE01 environment )
-
-3. Other
-    * Check Compact Flash only.
-    * Maybe, NE2000 compatible NIC is sure to move.
-
-Copyright (c) 2007
-	Nobuhiro Iwamatsu <iwamatsu@nigaur.org>

+ 0 - 11
doc/README.ne2000

@@ -21,17 +21,6 @@ value for my board as an example):
 
 - Address where the board is mapped
 
-#define CONFIG_DRIVER_NE2000_CCR (0x28000000+0x3f8)
-
-- Address of the CCR (card configuration register). It could be found
-by enabling DEBUG in cmd_pcmcia.c. If this is not defined nothing is
-done as far as PCMCIA support is concerned.
-
-#define CONFIG_DRIVER_NE2000_VAL (0x20)
-
-- The value to be written in the CCR. It selects among different I/O
-spaces that could be used by the card.
-
 
 Enjoy!
 

+ 0 - 2
drivers/Kconfig

@@ -70,8 +70,6 @@ source "drivers/pci_endpoint/Kconfig"
 
 source "drivers/pch/Kconfig"
 
-source "drivers/pcmcia/Kconfig"
-
 source "drivers/phy/Kconfig"
 
 source "drivers/phy/allwinner/Kconfig"

+ 0 - 1
drivers/Makefile

@@ -88,7 +88,6 @@ obj-y += misc/
 obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
 obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
-obj-y += pcmcia/
 obj-y += dfu/
 obj-$(CONFIG_PCH) += pch/
 obj-y += phy/allwinner/

+ 0 - 10
drivers/net/ne2000_base.c

@@ -693,16 +693,6 @@ static int ne2k_setup_driver(struct eth_device *dev)
 		}
 	}
 
-#ifdef CONFIG_DRIVER_NE2000_CCR
-	{
-		vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
-
-		PRINTK("CCR before is %x\n", *p);
-		*p = CONFIG_DRIVER_NE2000_VAL;
-		PRINTK("CCR after is %x\n", *p);
-	}
-#endif
-
 	nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
 
 	nic.data = nic.base + DP_DATA;

+ 0 - 0
drivers/pcmcia/Kconfig


+ 0 - 6
drivers/pcmcia/Makefile

@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o

+ 0 - 99
drivers/pcmcia/marubun_pcmcia.c

@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Marubun MR-SHPC-01 PCMCIA controller device driver
- *
- * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-
-#include <common.h>
-#include <config.h>
-#include <pcmcia.h>
-#include <asm/io.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define	CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_IDE)
-#define	CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_PCMCIA)
-
-/* MR-SHPC-01 register */
-#define MRSHPC_MODE	(CONFIG_SYS_MARUBUN_MRSHPC + 4)
-#define MRSHPC_OPTION   (CONFIG_SYS_MARUBUN_MRSHPC + 6)
-#define MRSHPC_CSR      (CONFIG_SYS_MARUBUN_MRSHPC + 8)
-#define MRSHPC_ISR      (CONFIG_SYS_MARUBUN_MRSHPC + 10)
-#define MRSHPC_ICR      (CONFIG_SYS_MARUBUN_MRSHPC + 12)
-#define MRSHPC_CPWCR    (CONFIG_SYS_MARUBUN_MRSHPC + 14)
-#define MRSHPC_MW0CR1   (CONFIG_SYS_MARUBUN_MRSHPC + 16)
-#define MRSHPC_MW1CR1   (CONFIG_SYS_MARUBUN_MRSHPC + 18)
-#define MRSHPC_IOWCR1   (CONFIG_SYS_MARUBUN_MRSHPC + 20)
-#define MRSHPC_MW0CR2   (CONFIG_SYS_MARUBUN_MRSHPC + 22)
-#define MRSHPC_MW1CR2   (CONFIG_SYS_MARUBUN_MRSHPC + 24)
-#define MRSHPC_IOWCR2   (CONFIG_SYS_MARUBUN_MRSHPC + 26)
-#define MRSHPC_CDCR     (CONFIG_SYS_MARUBUN_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (CONFIG_SYS_MARUBUN_MRSHPC + 30)
-
-int pcmcia_on (void)
-{
-	printf("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
-	/* Init */
-	outw( 0x0000 , MRSHPC_MODE );
-
-	if ((inw(MRSHPC_CSR) & 0x000c) == 0){	/* if card detect is true */
-		if ((inw(MRSHPC_CSR) & 0x0080) == 0){
-			outw(0x0674 ,MRSHPC_CPWCR);  /* Card Vcc is 3.3v? */
-		}else{
-			outw(0x0678 ,MRSHPC_CPWCR);  /* Card Vcc is 5V */
-		}
-		udelay( 100000 );   /* wait for power on */
-	}else{
-		return 1;
-	}
-	/*
-	 *	PC-Card window open
-	 *	flag == COMMON/ATTRIBUTE/IO
-	 */
-	/* common window open */
-	outw(0x8a84,MRSHPC_MW0CR1); /* window 0xb8400000 */
-	if ((inw(MRSHPC_CSR) & 0x4000) != 0)
-		outw(0x0b00,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 1 */
-	else
-		outw(0x0300,MRSHPC_MW0CR2); /* common mode & bus width 16bit SWAP = 0 */
-
-	/* attribute window open */
-	outw(0x8a85,MRSHPC_MW1CR1); /* window 0xb8500000 */
-	if ((inw(MRSHPC_CSR) & 0x4000) != 0)
-		outw(0x0a00,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 1 */
-	else
-		outw(0x0200,MRSHPC_MW1CR2); /* attribute mode & bus width 16bit SWAP = 0 */
-
-	/* I/O window open */
-	outw(0x8a86,MRSHPC_IOWCR1); /* I/O window 0xb8600000 */
-	outw(0x0008,MRSHPC_CDCR);   /* I/O card mode */
-	if ((inw(MRSHPC_CSR) & 0x4000) != 0)
-		outw(0x0a00,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1 */
-	else
-		outw(0x0200,MRSHPC_IOWCR2); /* bus width 16bit SWAP = 0 */
-
-	outw(0x0000,MRSHPC_ISR);
-	outw(0x2000,MRSHPC_ICR);
-	outb(0x00,(CONFIG_SYS_MARUBUN_MW2 + 0x206));
-	outb(0x42,(CONFIG_SYS_MARUBUN_MW2 + 0x200));
-
-	return 0;
-}
-
-int pcmcia_off (void)
-{
-	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
-	return 0;
-}
-
-#endif /* CONFIG_PCMCIA */

+ 0 - 2
include/common.h

@@ -339,8 +339,6 @@ static inline struct in_addr env_get_ip(char *var)
 	return string_to_ip(env_get(var));
 }
 
-int	pcmcia_init (void);
-
 #ifdef CONFIG_LED_STATUS
 # include <status_led.h>
 #endif

+ 0 - 137
include/pcmcia.h

@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#ifndef _PCMCIA_H
-#define _PCMCIA_H
-
-#include <common.h>
-#include <config.h>
-
-/*
- * Allow configuration to select PCMCIA slot,
- * or try to generate a useful default
- */
-#if defined(CONFIG_CMD_PCMCIA)
-
-#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-# error "PCMCIA Slot not configured"
-#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
-
-/* Make sure exactly one slot is defined - we support only one for now */
-#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
-#error Neither CONFIG_PCMCIA_SLOT_A nor CONFIG_PCMCIA_SLOT_B configured
-#endif
-#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
-#error Both CONFIG_PCMCIA_SLOT_A and CONFIG_PCMCIA_SLOT_B configured
-#endif
-
-#ifndef PCMCIA_SOCKETS_NO
-#define PCMCIA_SOCKETS_NO	1
-#endif
-#ifndef PCMCIA_MEM_WIN_NO
-#define PCMCIA_MEM_WIN_NO	4
-#endif
-#define PCMCIA_IO_WIN_NO	2
-
-/* define _slot_ to be able to optimize macros */
-#ifdef CONFIG_PCMCIA_SLOT_A
-# define _slot_			0
-# define PCMCIA_SLOT_MSG	"slot A"
-# define PCMCIA_SLOT_x		PCMCIA_PSLOT_A
-#else
-# define _slot_			1
-# define PCMCIA_SLOT_MSG	"slot B"
-# define PCMCIA_SLOT_x		PCMCIA_PSLOT_B
-#endif
-
-/*
- * This structure is used to address each window in the PCMCIA controller.
- *
- * Keep in mind that we assume that pcmcia_win_t[n+1] is mapped directly
- * after pcmcia_win_t[n]...
- */
-
-typedef struct {
-	ulong	br;
-	ulong	or;
-} pcmcia_win_t;
-
-/**********************************************************************/
-
-/*
- * CIS Tupel codes
- */
-#define CISTPL_NULL		0x00
-#define CISTPL_DEVICE		0x01
-#define CISTPL_LONGLINK_CB	0x02
-#define CISTPL_INDIRECT		0x03
-#define CISTPL_CONFIG_CB	0x04
-#define CISTPL_CFTABLE_ENTRY_CB 0x05
-#define CISTPL_LONGLINK_MFC	0x06
-#define CISTPL_BAR		0x07
-#define CISTPL_PWR_MGMNT	0x08
-#define CISTPL_EXTDEVICE	0x09
-#define CISTPL_CHECKSUM		0x10
-#define CISTPL_LONGLINK_A	0x11
-#define CISTPL_LONGLINK_C	0x12
-#define CISTPL_LINKTARGET	0x13
-#define CISTPL_NO_LINK		0x14
-#define CISTPL_VERS_1		0x15
-#define CISTPL_ALTSTR		0x16
-#define CISTPL_DEVICE_A		0x17
-#define CISTPL_JEDEC_C		0x18
-#define CISTPL_JEDEC_A		0x19
-#define CISTPL_CONFIG		0x1a
-#define CISTPL_CFTABLE_ENTRY	0x1b
-#define CISTPL_DEVICE_OC	0x1c
-#define CISTPL_DEVICE_OA	0x1d
-#define CISTPL_DEVICE_GEO	0x1e
-#define CISTPL_DEVICE_GEO_A	0x1f
-#define CISTPL_MANFID		0x20
-#define CISTPL_FUNCID		0x21
-#define CISTPL_FUNCE		0x22
-#define CISTPL_SWIL		0x23
-#define CISTPL_END		0xff
-
-/*
- * CIS Function ID codes
- */
-#define CISTPL_FUNCID_MULTI	0x00
-#define CISTPL_FUNCID_MEMORY	0x01
-#define CISTPL_FUNCID_SERIAL	0x02
-#define CISTPL_FUNCID_PARALLEL	0x03
-#define CISTPL_FUNCID_FIXED	0x04
-#define CISTPL_FUNCID_VIDEO	0x05
-#define CISTPL_FUNCID_NETWORK	0x06
-#define CISTPL_FUNCID_AIMS	0x07
-#define CISTPL_FUNCID_SCSI	0x08
-
-/*
- * Fixed Disk FUNCE codes
- */
-#define CISTPL_IDE_INTERFACE	0x01
-
-#define CISTPL_FUNCE_IDE_IFACE	0x01
-#define CISTPL_FUNCE_IDE_MASTER	0x02
-#define CISTPL_FUNCE_IDE_SLAVE	0x03
-
-/* First feature byte */
-#define CISTPL_IDE_SILICON	0x04
-#define CISTPL_IDE_UNIQUE	0x08
-#define CISTPL_IDE_DUAL		0x10
-
-/* Second feature byte */
-#define CISTPL_IDE_HAS_SLEEP	0x01
-#define CISTPL_IDE_HAS_STANDBY	0x02
-#define CISTPL_IDE_HAS_IDLE	0x04
-#define CISTPL_IDE_LOW_POWER	0x08
-#define CISTPL_IDE_REG_INHIBIT	0x10
-#define CISTPL_IDE_HAS_INDEX	0x20
-#define CISTPL_IDE_IOIS16	0x40
-
-#endif
-
-#endif /* _PCMCIA_H */

+ 0 - 156
include/pcmcia/yenta.h

@@ -1,156 +0,0 @@
-/*
- * yenta.h 1.20 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_YENTA_H
-#define _LINUX_YENTA_H
-
-/* PCI Configuration Registers */
-
-#define PCI_STATUS_CAPLIST		0x10
-#define PCI_CB_CAPABILITY_POINTER	0x14	/* 8 bit */
-#define PCI_CAPABILITY_ID		0x00	/* 8 bit */
-#define  PCI_CAPABILITY_PM		0x01
-#define PCI_NEXT_CAPABILITY		0x01	/* 8 bit */
-#define PCI_PM_CAPABILITIES		0x02	/* 16 bit */
-#define  PCI_PMCAP_PME_D3COLD		0x8000
-#define  PCI_PMCAP_PME_D3HOT		0x4000
-#define  PCI_PMCAP_PME_D2		0x2000
-#define  PCI_PMCAP_PME_D1		0x1000
-#define  PCI_PMCAP_PME_D0		0x0800
-#define  PCI_PMCAP_D2_CAP		0x0400
-#define  PCI_PMCAP_D1_CAP		0x0200
-#define  PCI_PMCAP_DYN_DATA		0x0100
-#define  PCI_PMCAP_DSI			0x0020
-#define  PCI_PMCAP_AUX_PWR		0x0010
-#define  PCI_PMCAP_PMECLK		0x0008
-#define  PCI_PMCAP_VERSION_MASK		0x0007
-#define PCI_PM_CONTROL_STATUS		0x04	/* 16 bit */
-#define  PCI_PMCS_PME_STATUS		0x8000
-#define  PCI_PMCS_DATASCALE_MASK	0x6000
-#define  PCI_PMCS_DATASCALE_SHIFT	13
-#define  PCI_PMCS_DATASEL_MASK		0x1e00
-#define  PCI_PMCS_DATASEL_SHIFT		9
-#define  PCI_PMCS_PME_ENABLE		0x0100
-#define  PCI_PMCS_PWR_STATE_MASK	0x0003
-#define  PCI_PMCS_PWR_STATE_D0		0x0000
-#define  PCI_PMCS_PWR_STATE_D1		0x0001
-#define  PCI_PMCS_PWR_STATE_D2		0x0002
-#define  PCI_PMCS_PWR_STATE_D3		0x0003
-#define PCI_PM_BRIDGE_EXT		0x06	/* 8 bit */
-#define PCI_PM_DATA			0x07	/* 8 bit */
-
-#define CB_PRIMARY_BUS			0x18	/* 8 bit */
-#define CB_CARDBUS_BUS			0x19	/* 8 bit */
-#define CB_SUBORD_BUS			0x1a	/* 8 bit */
-#define CB_LATENCY_TIMER		0x1b	/* 8 bit */
-
-#define CB_MEM_BASE(m)			(0x1c + 8*(m))
-#define CB_MEM_LIMIT(m)			(0x20 + 8*(m))
-#define CB_IO_BASE(m)			(0x2c + 8*(m))
-#define CB_IO_LIMIT(m)			(0x30 + 8*(m))
-
-#define CB_BRIDGE_CONTROL		0x3e	/* 16 bit */
-#define  CB_BCR_PARITY_ENA		0x0001
-#define  CB_BCR_SERR_ENA		0x0002
-#define  CB_BCR_ISA_ENA			0x0004
-#define  CB_BCR_VGA_ENA			0x0008
-#define  CB_BCR_MABORT			0x0020
-#define  CB_BCR_CB_RESET		0x0040
-#define  CB_BCR_ISA_IRQ			0x0080
-#define  CB_BCR_PREFETCH(m)		(0x0100 << (m))
-#define  CB_BCR_WRITE_POST		0x0400
-
-#define CB_LEGACY_MODE_BASE		0x44
-
-/* Memory mapped registers */
-
-#define CB_SOCKET_EVENT			0x0000
-#define  CB_SE_CSTSCHG			0x00000001
-#define  CB_SE_CCD			0x00000006
-#define  CB_SE_CCD1			0x00000002
-#define  CB_SE_CCD2			0x00000004
-#define  CB_SE_PWRCYCLE			0x00000008
-
-#define CB_SOCKET_MASK			0x0004
-#define  CB_SM_CSTSCHG			0x00000001
-#define  CB_SM_CCD			0x00000006
-#define  CB_SM_PWRCYCLE			0x00000008
-
-#define CB_SOCKET_STATE			0x0008
-#define  CB_SS_CSTSCHG			0x00000001
-#define  CB_SS_CCD			0x00000006
-#define  CB_SS_CCD1			0x00000002
-#define  CB_SS_CCD2			0x00000004
-#define  CB_SS_PWRCYCLE			0x00000008
-#define  CB_SS_16BIT			0x00000010
-#define  CB_SS_32BIT			0x00000020
-#define  CB_SS_CINT			0x00000040
-#define  CB_SS_BADCARD			0x00000080
-#define  CB_SS_DATALOST			0x00000100
-#define  CB_SS_BADVCC			0x00000200
-#define  CB_SS_5VCARD			0x00000400
-#define  CB_SS_3VCARD			0x00000800
-#define  CB_SS_XVCARD			0x00001000
-#define  CB_SS_YVCARD			0x00002000
-#define  CB_SS_VSENSE			0x00003c86
-#define  CB_SS_5VSOCKET			0x10000000
-#define  CB_SS_3VSOCKET			0x20000000
-#define  CB_SS_XVSOCKET			0x40000000
-#define  CB_SS_YVSOCKET			0x80000000
-
-#define CB_SOCKET_FORCE			0x000c
-#define  CB_SF_CVSTEST			0x00004000
-
-#define CB_SOCKET_CONTROL		0x0010
-#define  CB_SC_VPP_MASK			0x00000007
-#define   CB_SC_VPP_OFF			0x00000000
-#define   CB_SC_VPP_12V			0x00000001
-#define   CB_SC_VPP_5V			0x00000002
-#define   CB_SC_VPP_3V			0x00000003
-#define   CB_SC_VPP_XV			0x00000004
-#define   CB_SC_VPP_YV			0x00000005
-#define  CB_SC_VCC_MASK			0x00000070
-#define   CB_SC_VCC_OFF			0x00000000
-#define   CB_SC_VCC_5V			0x00000020
-#define   CB_SC_VCC_3V			0x00000030
-#define   CB_SC_VCC_XV			0x00000040
-#define   CB_SC_VCC_YV			0x00000050
-#define  CB_SC_CCLK_STOP		0x00000080
-
-#define CB_SOCKET_POWER			0x0020
-#define  CB_SP_CLK_CTRL			0x00000001
-#define  CB_SP_CLK_CTRL_ENA		0x00010000
-#define  CB_SP_CLK_MODE			0x01000000
-#define  CB_SP_ACCESS			0x02000000
-
-/* Address bits 31..24 for memory windows for 16-bit cards,
-   accessable only by memory mapping the 16-bit register set */
-#define CB_MEM_PAGE(map)		(0x40 + (map))
-
-#endif /* _LINUX_YENTA_H */

+ 0 - 6
scripts/config_whitelist.txt

@@ -362,8 +362,6 @@ CONFIG_DRIVER_DM9000
 CONFIG_DRIVER_EP93XX_MAC
 CONFIG_DRIVER_NE2000
 CONFIG_DRIVER_NE2000_BASE
-CONFIG_DRIVER_NE2000_CCR
-CONFIG_DRIVER_NE2000_VAL
 CONFIG_DRIVER_SMC911X_BASE
 CONFIG_DRIVER_TI_EMAC_USE_RMII
 CONFIG_DSP_CLUSTER_START
@@ -1357,9 +1355,6 @@ CONFIG_PCI_SKIP_HOST_BRIDGE
 CONFIG_PCI_SYS_BUS
 CONFIG_PCI_SYS_PHYS
 CONFIG_PCI_SYS_SIZE
-CONFIG_PCMCIA
-CONFIG_PCMCIA_SLOT_A
-CONFIG_PCMCIA_SLOT_B
 CONFIG_PCNET
 CONFIG_PCNET_79C973
 CONFIG_PCNET_79C975
@@ -3704,7 +3699,6 @@ CONFIG_SYS_PCI_TBATR3
 CONFIG_SYS_PCI_TBATR4
 CONFIG_SYS_PCI_TBATR5
 CONFIG_SYS_PCI_VIRT
-CONFIG_SYS_PCMCIA_MEM_SIZE
 CONFIG_SYS_PDCNT
 CONFIG_SYS_PEHLPAR
 CONFIG_SYS_PEPAR