Bläddra i källkod

kc1: OMAP4 reboot mode support

This adds support for the omap4 reboot mode mechanism and exports the reboot
mode via an environment variable, that is used in the boot command to make it
possible to boot from the recovery partition or fastboot.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Paul Kocialkowski 8 år sedan
förälder
incheckning
7c0a4b7955
3 ändrade filer med 24 tillägg och 0 borttagningar
  1. 18 0
      board/amazon/kc1/kc1.c
  2. 2 0
      board/amazon/kc1/kc1.h
  3. 4 0
      include/configs/kc1.h

+ 18 - 0
board/amazon/kc1/kc1.c

@@ -85,6 +85,19 @@ int board_init(void)
 
 int misc_init_r(void)
 {
+	char reboot_mode[2] = { 0 };
+
+	/* Reboot mode */
+
+	omap_reboot_mode(reboot_mode, sizeof(reboot_mode));
+
+	if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) {
+		if (!getenv("reboot-mode"))
+			setenv("reboot-mode", (char *)reboot_mode);
+
+		omap_reboot_mode_clear();
+	}
+
 	/* Serial number */
 
 	omap_die_id_serial();
@@ -123,6 +136,11 @@ void get_board_serial(struct tag_serialnr *serialnr)
 	omap_die_id_get_board_serial(serialnr);
 }
 
+int fb_set_reboot_flag(void)
+{
+	return omap_reboot_mode_store("b");
+}
+
 #ifndef CONFIG_SPL_BUILD
 int board_mmc_init(bd_t *bis)
 {

+ 2 - 0
board/amazon/kc1/kc1.h

@@ -11,6 +11,7 @@
 
 #include <asm/arch/mux_omap4.h>
 
+#define KC1_GPIO_USB_ID		52
 #define KC1_GPIO_MBID1		173
 #define KC1_GPIO_MBID0		174
 #define KC1_GPIO_MBID3		177
@@ -28,6 +29,7 @@ const struct pad_conf_entry core_padconf_array[] = {
 	{ GPMC_AD7,		(IEN  | PTU | M1) }, /* sdmmc2_dat7 */
 	{ GPMC_NOE,		(IEN  | PTU | M1) }, /* sdmmc2_clk */
 	{ GPMC_NWE,		(IEN  | PTU | M1) }, /* sdmmc2_cmd */
+	{ GPMC_NCS2,		(IEN  | PTD | M3) }, /* gpio_52 */
 	/* CAM */
 	{ CAM_SHUTTER,		(IDIS | DIS | M7) }, /* safe_mode */
 	{ CAM_STROBE,		(IDIS | DIS | M7) }, /* safe_mode */

+ 4 - 0
include/configs/kc1.h

@@ -249,6 +249,10 @@
 
 #define CONFIG_BOOTCOMMAND \
 	"setenv boot_mmc_part ${kernel_mmc_part}; " \
+	"if test reboot-${reboot-mode} = reboot-r; then " \
+	"echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
+	"if test reboot-${reboot-mode} = reboot-b; then " \
+	"echo fastboot; fastboot 0; fi; " \
 	"part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
 	"part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
 	"mmc dev ${boot_mmc_dev}; " \