|
@@ -0,0 +1,195 @@
|
|
|
+/*
|
|
|
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
|
+ *
|
|
|
+ * SPDX-License-Identifier: GPL-2.0+ X11
|
|
|
+ */
|
|
|
+
|
|
|
+/dts-v1/;
|
|
|
+#include "rk3368.dtsi"
|
|
|
+#include "rk3368-lion-u-boot.dtsi"
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Theobroma Systems RK3368-uQ7 SoM";
|
|
|
+ compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ mmc0 = &emmc;
|
|
|
+ mmc1 = &sdmmc;
|
|
|
+ };
|
|
|
+
|
|
|
+ memory@0 {
|
|
|
+ device_type = "memory";
|
|
|
+ reg = <0x0 0x0 0x0 0x80000000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ext_gmac: gmac-clk {
|
|
|
+ compatible = "fixed-clock";
|
|
|
+ clock-frequency = <125000000>;
|
|
|
+ clock-output-names = "ext_gmac";
|
|
|
+ #clock-cells = <0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_sys: vcc-sys-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc_sys";
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&uart0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&emmc {
|
|
|
+ status = "okay";
|
|
|
+ bus-width = <8>;
|
|
|
+ cap-mmc-highspeed;
|
|
|
+ clock-frequency = <150000000>;
|
|
|
+ disable-wp;
|
|
|
+ keep-power-in-suspend;
|
|
|
+ non-removable;
|
|
|
+ num-slots = <1>;
|
|
|
+ vmmc-supply = <&vcc33_io>;
|
|
|
+ vqmmc-supply = <&vcc18_io>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
|
|
|
+};
|
|
|
+
|
|
|
+&sdmmc {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&gmac {
|
|
|
+ status = "okay";
|
|
|
+ phy-supply = <&vcc33_io>;
|
|
|
+ phy-mode = "rgmii";
|
|
|
+ clock_in_out = "input";
|
|
|
+ snps,reset-gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
|
|
|
+ snps,reset-active-low;
|
|
|
+ snps,reset-delays-us = <2 10000 50000>;
|
|
|
+ assigned-clocks = <&cru SCLK_MAC>;
|
|
|
+ assigned-clock-parents = <&ext_gmac>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&rgmii_pins>;
|
|
|
+ tx_delay = <0x10>;
|
|
|
+ rx_delay = <0x10>;
|
|
|
+};
|
|
|
+
|
|
|
+&i2c0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ rk808: pmic@1b {
|
|
|
+ compatible = "rockchip,rk808";
|
|
|
+ reg = <0x1b>;
|
|
|
+ interrupt-parent = <&gpio0>;
|
|
|
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ rockchip,system-power-controller;
|
|
|
+ vcc1-supply = <&vcc_sys>;
|
|
|
+ vcc2-supply = <&vcc_sys>;
|
|
|
+ vcc3-supply = <&vcc_sys>;
|
|
|
+ vcc4-supply = <&vcc_sys>;
|
|
|
+ vcc6-supply = <&vcc_sys>;
|
|
|
+ vcc7-supply = <&vcc_sys>;
|
|
|
+ vcc8-supply = <&vcc_sys>;
|
|
|
+ vcc9-supply = <&vcc_sys>;
|
|
|
+ vcc10-supply = <&vcc_sys>;
|
|
|
+ vcc11-supply = <&vcc_sys>;
|
|
|
+ vcc12-supply = <&vcc_sys>;
|
|
|
+ clock-output-names = "xin32k", "rk808-clkout2";
|
|
|
+ #clock-cells = <1>;
|
|
|
+
|
|
|
+ regulators {
|
|
|
+ vdd_cpu: DCDC_REG1 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <700000>;
|
|
|
+ regulator-max-microvolt = <1500000>;
|
|
|
+ regulator-name = "vdd_cpu";
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_log: DCDC_REG2 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <700000>;
|
|
|
+ regulator-max-microvolt = <1500000>;
|
|
|
+ regulator-name = "vdd_log";
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-name = "vcc_ddr";
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc33_io: DCDC_REG4 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ regulator-name = "vcc33_io";
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc33_video: LDO_REG2 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ regulator-name = "vcc33_video";
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd10_pll: LDO_REG3 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1000000>;
|
|
|
+ regulator-max-microvolt = <1000000>;
|
|
|
+ regulator-name = "vdd10_pll";
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc18_io: LDO_REG4 {
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-name = "vcc18_io";
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd10_video: LDO_REG6 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1000000>;
|
|
|
+ regulator-max-microvolt = <1000000>;
|
|
|
+ regulator-name = "vdd10_video";
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc18_video: LDO_REG8 {
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-name = "vcc18_video";
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&uart0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&spi1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+
|
|
|
+ spiflash: w25q32dw@0 {
|
|
|
+ compatible = "spi-flash";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <49500000>;
|
|
|
+ spi-cpol;
|
|
|
+ spi-cpha;
|
|
|
+ };
|
|
|
+};
|