Browse Source

nitrogen6x: display: add support for LG-9.7 LVDS display

Add support for LG 9.7" LVDS panel (1024x768) with integrated eGalax
touch screen.

Note that this panel differs only slightly from the Hannstar XGA panel
(margins).

No auto-detection is available because it shares the same touch controller
as the Hannstar-XGA display, so you'll need to configure it through the
'panel' environment variable:

        U-Boot > setenv panel LG-9.7
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Eric Nelson 9 years ago
parent
commit
4adc1127f8
1 changed files with 20 additions and 0 deletions
  1. 20 0
      board/boundary/nitrogen6x/nitrogen6x.c

+ 20 - 0
board/boundary/nitrogen6x/nitrogen6x.c

@@ -553,6 +553,26 @@ struct display_info_t const displays[] = {{
 		.vsync_len      = 10,
 		.sync           = FB_SYNC_EXT,
 		.vmode          = FB_VMODE_NONINTERLACED
+} }, {
+	.bus	= 0,
+	.addr	= 0,
+	.pixfmt	= IPU_PIX_FMT_LVDS666,
+	.detect	= NULL,
+	.enable	= enable_lvds,
+	.mode	= {
+		.name           = "LG-9.7",
+		.refresh        = 60,
+		.xres           = 1024,
+		.yres           = 768,
+		.pixclock       = 15385, /* ~65MHz */
+		.left_margin    = 480,
+		.right_margin   = 260,
+		.upper_margin   = 16,
+		.lower_margin   = 6,
+		.hsync_len      = 250,
+		.vsync_len      = 10,
+		.sync           = FB_SYNC_EXT,
+		.vmode          = FB_VMODE_NONINTERLACED
 } }, {
 	.bus	= 2,
 	.addr	= 0x38,