|
@@ -0,0 +1,813 @@
|
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
+/*
|
|
|
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
|
|
|
+ */
|
|
|
+
|
|
|
+/dts-v1/;
|
|
|
+#include <dt-bindings/input/linux-event-codes.h>
|
|
|
+#include <dt-bindings/pwm/pwm.h>
|
|
|
+#include "rk3399.dtsi"
|
|
|
+#include "rk3399-opp.dtsi"
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Firefly ROC-RK3399-PC Board";
|
|
|
+ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ stdout-path = "serial2:1500000n8";
|
|
|
+ };
|
|
|
+
|
|
|
+ backlight: backlight {
|
|
|
+ compatible = "pwm-backlight";
|
|
|
+ pwms = <&pwm0 0 25000 0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ clkin_gmac: external-gmac-clock {
|
|
|
+ compatible = "fixed-clock";
|
|
|
+ clock-frequency = <125000000>;
|
|
|
+ clock-output-names = "clkin_gmac";
|
|
|
+ #clock-cells = <0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ adc-keys {
|
|
|
+ compatible = "adc-keys";
|
|
|
+ io-channels = <&saradc 1>;
|
|
|
+ io-channel-names = "buttons";
|
|
|
+ keyup-threshold-microvolt = <1500000>;
|
|
|
+ poll-interval = <100>;
|
|
|
+
|
|
|
+ recovery {
|
|
|
+ label = "Recovery";
|
|
|
+ linux,code = <KEY_VENDOR>;
|
|
|
+ press-threshold-microvolt = <18000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ gpio-keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+ autorepeat;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&pwr_key_l>;
|
|
|
+
|
|
|
+ power {
|
|
|
+ debounce-interval = <100>;
|
|
|
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
|
|
+ label = "GPIO Key Power";
|
|
|
+ linux,code = <KEY_POWER>;
|
|
|
+ wakeup-source;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
|
|
|
+
|
|
|
+ work-led {
|
|
|
+ label = "green:work";
|
|
|
+ gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
|
+ default-state = "on";
|
|
|
+ linux,default-trigger = "heartbeat";
|
|
|
+ };
|
|
|
+
|
|
|
+ diy-led {
|
|
|
+ label = "red:diy";
|
|
|
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
|
+ default-state = "off";
|
|
|
+ linux,default-trigger = "mmc1";
|
|
|
+ };
|
|
|
+
|
|
|
+ yellow-led {
|
|
|
+ label = "yellow:yellow-led";
|
|
|
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
|
+ default-state = "off";
|
|
|
+ linux,default-trigger = "mmc0";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ sdio_pwrseq: sdio-pwrseq {
|
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
|
+ clocks = <&rk808 1>;
|
|
|
+ clock-names = "ext_clock";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&wifi_enable_h>;
|
|
|
+
|
|
|
+ /*
|
|
|
+ * On the module itself this is one of these (depending
|
|
|
+ * on the actual card populated):
|
|
|
+ * - SDIO_RESET_L_WL_REG_ON
|
|
|
+ * - PDN (power down when low)
|
|
|
+ */
|
|
|
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_vbus_typec0: vcc-vbus-typec0 {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc_vbus_typec0";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ /*
|
|
|
+ * should be placed inside mp8859, but not until mp8859 has
|
|
|
+ * its own dt-binding.
|
|
|
+ */
|
|
|
+ dc_12v: mp8859-dcdc1 {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "dc_12v";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <12000000>;
|
|
|
+ regulator-max-microvolt = <12000000>;
|
|
|
+ vin-supply = <&vcc_vbus_typec0>;
|
|
|
+ };
|
|
|
+
|
|
|
+ /* switched by pmic_sleep */
|
|
|
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc1v8_s3";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ vin-supply = <&vcc_1v8>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v0_sd: vcc3v0-sd {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc3v0_sd_en>;
|
|
|
+ regulator-name = "vcc3v0_sd";
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3000000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_sys: vcc3v3-sys {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcc3v3_sys";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ vin-supply = <&dc_12v>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca_0v9: vcca-0v9 {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ regulator-name = "vcca_0v9";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <900000>;
|
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
|
+ };
|
|
|
+
|
|
|
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
|
|
+ vcc5v0_host: vcc5v0-host-regulator {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
|
|
|
+ regulator-name = "vcc5v0_host";
|
|
|
+ regulator-always-on;
|
|
|
+ vin-supply = <&vcc_sys>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_vbus_typec1: vcc-vbus-typec1 {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc_vbus_typec1_en>;
|
|
|
+ regulator-name = "vcc_vbus_typec1";
|
|
|
+ regulator-always-on;
|
|
|
+ vin-supply = <&vcc_sys>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_sys: vcc-sys {
|
|
|
+ compatible = "regulator-fixed";
|
|
|
+ enable-active-high;
|
|
|
+ gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vcc_sys_en>;
|
|
|
+ regulator-name = "vcc_sys";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <5000000>;
|
|
|
+ regulator-max-microvolt = <5000000>;
|
|
|
+ vin-supply = <&dc_12v>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_log: vdd-log {
|
|
|
+ compatible = "pwm-regulator";
|
|
|
+ pwms = <&pwm2 0 25000 1>;
|
|
|
+ regulator-name = "vdd_log";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <450000>;
|
|
|
+ regulator-max-microvolt = <1400000>;
|
|
|
+ pwm-supply = <&vcc3v3_sys>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&cpu_l0 {
|
|
|
+ cpu-supply = <&vdd_cpu_l>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu_l1 {
|
|
|
+ cpu-supply = <&vdd_cpu_l>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu_l2 {
|
|
|
+ cpu-supply = <&vdd_cpu_l>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu_l3 {
|
|
|
+ cpu-supply = <&vdd_cpu_l>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu_b0 {
|
|
|
+ cpu-supply = <&vdd_cpu_b>;
|
|
|
+};
|
|
|
+
|
|
|
+&cpu_b1 {
|
|
|
+ cpu-supply = <&vdd_cpu_b>;
|
|
|
+};
|
|
|
+
|
|
|
+&emmc_phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&gmac {
|
|
|
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
|
|
|
+ assigned-clock-parents = <&clkin_gmac>;
|
|
|
+ clock_in_out = "input";
|
|
|
+ phy-supply = <&vcc_lan>;
|
|
|
+ phy-mode = "rgmii";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&rgmii_pins>;
|
|
|
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
|
+ snps,reset-active-low;
|
|
|
+ snps,reset-delays-us = <0 10000 50000>;
|
|
|
+ tx_delay = <0x28>;
|
|
|
+ rx_delay = <0x11>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&gpu {
|
|
|
+ mali-supply = <&vdd_gpu>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi {
|
|
|
+ ddc-i2c-bus = <&i2c3>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&hdmi_cec>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi_sound {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2c0 {
|
|
|
+ clock-frequency = <400000>;
|
|
|
+ i2c-scl-rising-time-ns = <168>;
|
|
|
+ i2c-scl-falling-time-ns = <4>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ rk808: pmic@1b {
|
|
|
+ compatible = "rockchip,rk808";
|
|
|
+ reg = <0x1b>;
|
|
|
+ interrupt-parent = <&gpio1>;
|
|
|
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ #clock-cells = <1>;
|
|
|
+ clock-output-names = "xin32k", "rk808-clkout2";
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&pmic_int_l>;
|
|
|
+ rockchip,system-power-controller;
|
|
|
+ wakeup-source;
|
|
|
+
|
|
|
+ vcc1-supply = <&vcc3v3_sys>;
|
|
|
+ vcc2-supply = <&vcc3v3_sys>;
|
|
|
+ vcc3-supply = <&vcc3v3_sys>;
|
|
|
+ vcc4-supply = <&vcc3v3_sys>;
|
|
|
+ vcc6-supply = <&vcc3v3_sys>;
|
|
|
+ vcc7-supply = <&vcc3v3_sys>;
|
|
|
+ vcc8-supply = <&vcc3v3_sys>;
|
|
|
+ vcc9-supply = <&vcc3v3_sys>;
|
|
|
+ vcc10-supply = <&vcc3v3_sys>;
|
|
|
+ vcc11-supply = <&vcc3v3_sys>;
|
|
|
+ vcc12-supply = <&vcc3v3_sys>;
|
|
|
+ vcc13-supply = <&vcc3v3_sys>;
|
|
|
+ vcc14-supply = <&vcc3v3_sys>;
|
|
|
+ vddio-supply = <&vcc_3v0>;
|
|
|
+
|
|
|
+ regulators {
|
|
|
+ vdd_center: DCDC_REG1 {
|
|
|
+ regulator-name = "vdd_center";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <750000>;
|
|
|
+ regulator-max-microvolt = <1350000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_cpu_l: DCDC_REG2 {
|
|
|
+ regulator-name = "vdd_cpu_l";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <750000>;
|
|
|
+ regulator-max-microvolt = <1350000>;
|
|
|
+ regulator-ramp-delay = <6001>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
|
+ regulator-name = "vcc_ddr";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_1v8: DCDC_REG4 {
|
|
|
+ regulator-name = "vcc_1v8";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca1v8_codec: LDO_REG1 {
|
|
|
+ regulator-name = "vcca1v8_codec";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc1v8_hdmi: LDO_REG2 {
|
|
|
+ regulator-name = "vcc1v8_hdmi";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc1v8_pmu: LDO_REG3 {
|
|
|
+ regulator-name = "vcc1v8_pmu";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_sdio: LDO_REG4 {
|
|
|
+ regulator-name = "vcc_sdio";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca3v0_codec: LDO_REG5 {
|
|
|
+ regulator-name = "vcca3v0_codec";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3000000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_1v5: LDO_REG6 {
|
|
|
+ regulator-name = "vcc_1v5";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <1500000>;
|
|
|
+ regulator-max-microvolt = <1500000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <1500000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcca0v9_hdmi: LDO_REG7 {
|
|
|
+ regulator-name = "vcca0v9_hdmi";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <900000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_3v0: LDO_REG8 {
|
|
|
+ regulator-name = "vcc_3v0";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-min-microvolt = <3000000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-on-in-suspend;
|
|
|
+ regulator-suspend-microvolt = <3000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
|
|
+ regulator-name = "vcc3v3_s3";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc3v3_s0: SWITCH_REG2 {
|
|
|
+ regulator-name = "vcc3v3_s0";
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_cpu_b: regulator@40 {
|
|
|
+ compatible = "silergy,syr827";
|
|
|
+ reg = <0x40>;
|
|
|
+ fcs,suspend-voltage-selector = <1>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vsel1_gpio>;
|
|
|
+ regulator-name = "vdd_cpu_b";
|
|
|
+ regulator-min-microvolt = <712500>;
|
|
|
+ regulator-max-microvolt = <1500000>;
|
|
|
+ regulator-ramp-delay = <1000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ vdd_gpu: regulator@41 {
|
|
|
+ compatible = "silergy,syr828";
|
|
|
+ reg = <0x41>;
|
|
|
+ fcs,suspend-voltage-selector = <1>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&vsel2_gpio>;
|
|
|
+ regulator-name = "vdd_gpu";
|
|
|
+ regulator-min-microvolt = <712500>;
|
|
|
+ regulator-max-microvolt = <1500000>;
|
|
|
+ regulator-ramp-delay = <1000>;
|
|
|
+ vin-supply = <&vcc3v3_sys>;
|
|
|
+
|
|
|
+ regulator-state-mem {
|
|
|
+ regulator-off-in-suspend;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2c1 {
|
|
|
+ i2c-scl-rising-time-ns = <300>;
|
|
|
+ i2c-scl-falling-time-ns = <15>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2c3 {
|
|
|
+ i2c-scl-rising-time-ns = <450>;
|
|
|
+ i2c-scl-falling-time-ns = <15>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2c4 {
|
|
|
+ i2c-scl-rising-time-ns = <600>;
|
|
|
+ i2c-scl-falling-time-ns = <20>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ fusb1: usb-typec@22 {
|
|
|
+ compatible = "fcs,fusb302";
|
|
|
+ reg = <0x22>;
|
|
|
+ interrupt-parent = <&gpio1>;
|
|
|
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&fusb1_int>;
|
|
|
+ vbus-supply = <&vcc_vbus_typec1>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2c7 {
|
|
|
+ i2c-scl-rising-time-ns = <600>;
|
|
|
+ i2c-scl-falling-time-ns = <20>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ fusb0: usb-typec@22 {
|
|
|
+ compatible = "fcs,fusb302";
|
|
|
+ reg = <0x22>;
|
|
|
+ interrupt-parent = <&gpio1>;
|
|
|
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&fusb0_int>;
|
|
|
+ vbus-supply = <&vcc_vbus_typec0>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2s0 {
|
|
|
+ rockchip,playback-channels = <8>;
|
|
|
+ rockchip,capture-channels = <8>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2s1 {
|
|
|
+ rockchip,playback-channels = <2>;
|
|
|
+ rockchip,capture-channels = <2>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&i2s2 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&io_domains {
|
|
|
+ audio-supply = <&vcca1v8_codec>;
|
|
|
+ bt656-supply = <&vcc_3v0>;
|
|
|
+ gpio1830-supply = <&vcc_3v0>;
|
|
|
+ sdmmc-supply = <&vcc_sdio>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pmu_io_domains {
|
|
|
+ pmu1830-supply = <&vcc_3v0>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pinctrl {
|
|
|
+ buttons {
|
|
|
+ pwr_key_l: pwr-key-l {
|
|
|
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ lcd-panel {
|
|
|
+ lcd_panel_reset: lcd-panel-reset {
|
|
|
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ diy_led_gpio: diy_led-gpio {
|
|
|
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+
|
|
|
+ work_led_gpio: work_led-gpio {
|
|
|
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+
|
|
|
+ yellow_led_gpio: yellow_led-gpio {
|
|
|
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ pmic {
|
|
|
+ vsel1_gpio: vsel1-gpio {
|
|
|
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vsel2_gpio: vsel2-gpio {
|
|
|
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ sdio-pwrseq {
|
|
|
+ wifi_enable_h: wifi-enable-h {
|
|
|
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ sdmmc {
|
|
|
+ vcc3v0_sd_en: vcc3v0-sd-en {
|
|
|
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ pmic {
|
|
|
+ pmic_int_l: pmic-int-l {
|
|
|
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ usb2 {
|
|
|
+ vcc5v0_host_en: vcc5v0-host-en {
|
|
|
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+
|
|
|
+ vcc_sys_en: vcc-sys-en {
|
|
|
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+
|
|
|
+ hub_rst: hub-rst {
|
|
|
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ usb-typec {
|
|
|
+ vcc_vbus_typec1_en: vcc-vbus-typec1-en {
|
|
|
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ fusb30x {
|
|
|
+ fusb0_int: fusb0-int {
|
|
|
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+
|
|
|
+ fusb1_int: fusb1-int {
|
|
|
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pwm0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pwm2 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&saradc {
|
|
|
+ vref-supply = <&vcca1v8_s3>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sdmmc {
|
|
|
+ bus-width = <4>;
|
|
|
+ cap-sd-highspeed;
|
|
|
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
|
+ disable-wp;
|
|
|
+ max-frequency = <150000000>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
|
|
+ sd-uhs-sdr104;
|
|
|
+ vmmc-supply = <&vcc3v0_sd>;
|
|
|
+ vqmmc-supply = <&vcc_sdio>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sdhci {
|
|
|
+ bus-width = <8>;
|
|
|
+ non-removable;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&spi1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <10000000>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&tcphy0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&tcphy1 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&tsadc {
|
|
|
+ /* tshut mode 0:CRU 1:GPIO */
|
|
|
+ rockchip,hw-tshut-mode = <1>;
|
|
|
+ /* tshut polarity 0:LOW 1:HIGH */
|
|
|
+ rockchip,hw-tshut-polarity = <1>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&u2phy0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ u2phy0_otg: otg-port {
|
|
|
+ phy-supply = <&vcc_vbus_typec0>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ u2phy0_host: host-port {
|
|
|
+ phy-supply = <&vcc5v0_host>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&u2phy1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ u2phy1_otg: otg-port {
|
|
|
+ phy-supply = <&vcc_vbus_typec1>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ u2phy1_host: host-port {
|
|
|
+ phy-supply = <&vcc5v0_host>;
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&uart0 {
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&uart2 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host0_ehci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host0_ohci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host1_ehci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_host1_ohci {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usbdrd3_0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usbdrd_dwc3_0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usbdrd3_1 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usbdrd_dwc3_1 {
|
|
|
+ status = "okay";
|
|
|
+ dr_mode = "host";
|
|
|
+};
|
|
|
+
|
|
|
+&vopb {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vopb_mmu {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vopl {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&vopl_mmu {
|
|
|
+ status = "okay";
|
|
|
+};
|