Browse Source

Merge branch 'master' of git://git.denx.de/u-boot-arm

Small conflict over DRA7XX updates and adding SRAM_SCRATCH_SPACE_ADDR

Conflicts:
	arch/arm/include/asm/arch-omap5/omap.h

Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini 11 years ago
parent
commit
41341221d1
100 changed files with 4130 additions and 3412 deletions
  1. 16 4
      MAINTAINERS
  2. 1 1
      Makefile
  3. 0 18
      arch/arm/cpu/arm1136/start.S
  4. 1 0
      arch/arm/cpu/arm926ejs/davinci/Makefile
  5. 151 0
      arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
  6. 22 3
      arch/arm/cpu/arm926ejs/mxs/mxs.c
  7. 1 0
      arch/arm/cpu/armv7/omap-common/Makefile
  8. 137 0
      arch/arm/cpu/armv7/omap-common/abb.c
  9. 82 19
      arch/arm/cpu/armv7/omap-common/clocks-common.c
  10. 24 4
      arch/arm/cpu/armv7/omap-common/emif-common.c
  11. 0 2
      arch/arm/cpu/armv7/omap-common/hwinit-common.c
  12. 1 0
      arch/arm/cpu/armv7/omap-common/timer.c
  13. 13 1
      arch/arm/cpu/armv7/omap-common/vc.c
  14. 1 1
      arch/arm/cpu/armv7/omap3/clock.c
  15. 11 2
      arch/arm/cpu/armv7/omap4/hw_data.c
  16. 3 0
      arch/arm/cpu/armv7/omap4/prcm-regs.c
  17. 1 0
      arch/arm/cpu/armv7/omap5/Makefile
  18. 67 0
      arch/arm/cpu/armv7/omap5/abb.c
  19. 121 46
      arch/arm/cpu/armv7/omap5/hw_data.c
  20. 16 8
      arch/arm/cpu/armv7/omap5/hwinit.c
  21. 20 0
      arch/arm/cpu/armv7/omap5/prcm-regs.c
  22. 160 10
      arch/arm/cpu/armv7/omap5/sdram.c
  23. 42 0
      arch/arm/cpu/armv7/vf610/Makefile
  24. 324 0
      arch/arm/cpu/armv7/vf610/generic.c
  25. 103 0
      arch/arm/cpu/armv7/vf610/timer.c
  26. 1 1
      arch/arm/cpu/pxa/pxa2xx.c
  27. 4 0
      arch/arm/cpu/tegra-common/ap.c
  28. 1 1
      arch/arm/imx-common/Makefile
  29. 6 0
      arch/arm/imx-common/iomux-v3.c
  30. 14 1
      arch/arm/include/asm/arch-davinci/pinmux_defs.h
  31. 0 48
      arch/arm/include/asm/arch-omap24xx/bits.h
  32. 0 112
      arch/arm/include/asm/arch-omap24xx/clocks.h
  33. 0 68
      arch/arm/include/asm/arch-omap24xx/i2c.h
  34. 0 156
      arch/arm/include/asm/arch-omap24xx/mem.h
  35. 0 176
      arch/arm/include/asm/arch-omap24xx/mux.h
  36. 0 236
      arch/arm/include/asm/arch-omap24xx/omap2420.h
  37. 0 82
      arch/arm/include/asm/arch-omap24xx/sys_info.h
  38. 0 54
      arch/arm/include/asm/arch-omap24xx/sys_proto.h
  39. 0 0
      arch/arm/include/asm/arch-omap3/clock.h
  40. 7 0
      arch/arm/include/asm/arch-omap3/omap3.h
  41. 5 29
      arch/arm/include/asm/arch-omap4/clock.h
  42. 0 12
      arch/arm/include/asm/arch-omap4/cpu.h
  43. 8 14
      arch/arm/include/asm/arch-omap4/omap.h
  44. 3 2
      arch/arm/include/asm/arch-omap4/sys_proto.h
  45. 73 18
      arch/arm/include/asm/arch-omap5/clock.h
  46. 0 12
      arch/arm/include/asm/arch-omap5/cpu.h
  47. 5 2
      arch/arm/include/asm/arch-omap5/mux_dra7xx.h
  48. 30 37
      arch/arm/include/asm/arch-omap5/omap.h
  49. 4 3
      arch/arm/include/asm/arch-omap5/sys_proto.h
  50. 39 0
      arch/arm/include/asm/arch-vf610/clock.h
  51. 225 0
      arch/arm/include/asm/arch-vf610/crm_regs.h
  52. 419 0
      arch/arm/include/asm/arch-vf610/imx-regs.h
  53. 101 0
      arch/arm/include/asm/arch-vf610/iomux-vf610.h
  54. 5 7
      arch/arm/include/asm/emif.h
  55. 18 0
      arch/arm/include/asm/imx-common/iomux-v3.h
  56. 55 4
      arch/arm/include/asm/omap_common.h
  57. 1 1
      arch/arm/lib/cache.c
  58. 2 2
      arch/arm/lib/crt0.S
  59. 0 1
      board/boundary/nitrogen6x/nitrogen6x.c
  60. 42 0
      board/congatec/cgtqmx6eval/Makefile
  61. 29 0
      board/congatec/cgtqmx6eval/README
  62. 167 0
      board/congatec/cgtqmx6eval/cgtqmx6eval.c
  63. 43 112
      board/davinci/da8xxevm/da830evm.c
  64. 6 0
      board/freescale/mx23evk/mx23evk.c
  65. 32 0
      board/freescale/mx23evk/spl_boot.c
  66. 33 0
      board/freescale/mx28evk/iomux.c
  67. 6 0
      board/freescale/mx28evk/mx28evk.c
  68. 57 0
      board/freescale/mx6qsabreauto/mx6qsabreauto.c
  69. 0 1
      board/freescale/mx6qsabrelite/mx6qsabrelite.c
  70. 39 0
      board/freescale/vf610twr/Makefile
  71. 33 0
      board/freescale/vf610twr/imximage.cfg
  72. 407 0
      board/freescale/vf610twr/vf610twr.c
  73. 1 1
      board/htkw/mcx/mcx.c
  74. 6 10
      board/icpdas/lp8x4x/Makefile
  75. 147 0
      board/icpdas/lp8x4x/lp8x4x.c
  76. 2 2
      board/keymile/km_arm/km_arm.c
  77. 1 1
      board/teejet/mt_ventoux/mt_ventoux.c
  78. 2 0
      board/ti/am335x/board.c
  79. 24 14
      board/ti/dra7xx/mux_data.h
  80. 0 28
      board/ti/omap2420h4/config.mk
  81. 0 185
      board/ti/omap2420h4/lowlevel_init.S
  82. 0 362
      board/ti/omap2420h4/mem.c
  83. 0 867
      board/ti/omap2420h4/omap2420h4.c
  84. 0 387
      board/ti/omap2420h4/sys_info.c
  85. 8 4
      board/ti/omap5_uevm/evm.c
  86. 13 9
      board/ti/panda/panda.c
  87. 10 6
      board/ti/sdp4430/sdp.c
  88. 2 2
      board/wandboard/README
  89. 98 0
      board/wandboard/wandboard.c
  90. 3 1
      boards.cfg
  91. 1 0
      doc/README.mxc_ocotp
  92. 1 0
      doc/README.scrapyard
  93. 10 0
      doc/README.vf610
  94. 299 191
      drivers/i2c/omap24xx_i2c.c
  95. 9 11
      drivers/mmc/omap_hsmmc.c
  96. 1 3
      drivers/net/fec_mxc.c
  97. 121 12
      drivers/power/palmas.c
  98. 1 0
      drivers/serial/Makefile
  99. 0 5
      drivers/serial/ns16550.c
  100. 132 0
      drivers/serial/serial_lpuart.c

+ 16 - 4
MAINTAINERS

@@ -897,6 +897,10 @@ Steve Sakoman <sakoman@gmail.com>
 
 	omap3_overo	ARM ARMV7 (OMAP3xx SoC)
 
+Leo Sartre <lsartre@adeneo-embedded.com>
+
+	cgtqmx6qeval		i.MX6Q
+
 Jens Scharsig <esw@bus-elektronik.de>
 
 	eb_cpux9k2	ARM920T (AT91RM9200 SoC)
@@ -969,6 +973,10 @@ Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
 
 	SFFSDR		ARM926EJS
 
+Lokesh Vutla <lokeshvutla@ti.com>
+
+	dra7xx_evm	ARM ARMV7 (DRA7xx Soc)
+
 Matt Waddel <matt.waddel@linaro.org>
 
 	vexpress_ca9x4	ARM ARMV7 (Quad Core)
@@ -1025,10 +1033,6 @@ Matthias Weisser <weisserm@arcor.de>
 	jadecpu		ARM926EJS (MB86R01 SoC)
 	zmx25		ARM926EJS (imx25 SoC)
 
-Richard Woodruff <r-woodruff2@ti.com>
-
-	omap2420h4	ARM1136EJS
-
 Josh Wu <josh.wu@atmel.com>
 	at91sam9n12ek	ARM926EJS (AT91SAM9N12 SoC)
 
@@ -1066,6 +1070,14 @@ Eric Nelson <eric.nelson@boundarydevices.com>
 	nitrogen6s		i.MX6S		512MB
 	nitrogen6s1g		i.MX6S		1GB
 
+Alison Wang <b18965@freescale.com>
+
+	vf610twr	VF610
+
+Sergey Yanovich <ynvich@gmail.com>
+
+	lp8x4x		xscale/pxa
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:

+ 1 - 1
Makefile

@@ -341,7 +341,7 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(C
 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
 endif
 
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs))
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
 LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
 endif
 

+ 0 - 18
arch/arm/cpu/arm1136/start.S

@@ -142,24 +142,6 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
-#ifdef CONFIG_OMAP2420H4
-       /* Copy vectors to mask ROM indirect addr */
-	adr	r0, _start		/* r0 <- current position of code   */
-		add     r0, r0, #4				/* skip reset vector			*/
-	mov	r2, #64			/* r2 <- size to copy  */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
-	mov	r3, #SRAM_OFFSET1
-	add	r1, r1, r3
-	mov	r3, #SRAM_OFFSET2
-	add	r1, r1, r3
-next:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	bne	next			/* loop until equal */
-	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
-#endif
 	/* the mask ROM code should have PLL and others stable */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl  cpu_init_crit

+ 1 - 0
arch/arm/cpu/arm926ejs/davinci/Makefile

@@ -33,6 +33,7 @@ COBJS-$(CONFIG_SOC_DM355)	+= dm355.o
 COBJS-$(CONFIG_SOC_DM365)	+= dm365.o
 COBJS-$(CONFIG_SOC_DM644X)	+= dm644x.o
 COBJS-$(CONFIG_SOC_DM646X)	+= dm646x.o
+COBJS-$(CONFIG_SOC_DA830)	+= da830_pinmux.o
 COBJS-$(CONFIG_SOC_DA850)	+= da850_pinmux.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= lxt972.o dp83848.o et1011c.o ksz8873.o
 

+ 151 - 0
arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c

@@ -0,0 +1,151 @@
+/*
+ * Pinmux configurations for the DA830 SoCs
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/davinci_misc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pinmux_defs.h>
+
+/* SPI0 pin muxer settings */
+const struct pinmux_config spi0_pins_base[] = {
+	{ pinmux(7), 1, 3 },  /* SPI0_SOMI */
+	{ pinmux(7), 1, 4 },  /* SPI0_SIMO */
+	{ pinmux(7), 1, 6 }   /* SPI0_CLK */
+};
+
+const struct pinmux_config spi0_pins_scs0[] = {
+	{ pinmux(7), 1, 7 }   /* SPI0_SCS[0] */
+};
+
+const struct pinmux_config spi0_pins_ena[] = {
+	{ pinmux(7), 1, 5 }   /* SPI0_ENA */
+};
+
+/* NAND pin muxer settings */
+const struct pinmux_config emifa_pins_cs0[] = {
+	{ pinmux(18), 1, 2 }   /* EMA_CS[0] */
+};
+
+const struct pinmux_config emifa_pins_cs2[] = {
+	{ pinmux(18), 1, 3 }   /* EMA_CS[2] */
+};
+
+const struct pinmux_config emifa_pins_cs3[] = {
+	{ pinmux(18), 1, 4 }   /* EMA_CS[3] */
+};
+
+#ifdef CONFIG_USE_NAND
+const struct pinmux_config emifa_pins[] = {
+	{ pinmux(13), 1, 6 },  /* EMA_D[0] */
+	{ pinmux(13), 1, 7 },  /* EMA_D[1] */
+	{ pinmux(14), 1, 0 },  /* EMA_D[2] */
+	{ pinmux(14), 1, 1 },  /* EMA_D[3] */
+	{ pinmux(14), 1, 2 },  /* EMA_D[4] */
+	{ pinmux(14), 1, 3 },  /* EMA_D[5] */
+	{ pinmux(14), 1, 4 },  /* EMA_D[6] */
+	{ pinmux(14), 1, 5 },  /* EMA_D[7] */
+	{ pinmux(14), 1, 6 },  /* EMA_D[8] */
+	{ pinmux(14), 1, 7 },  /* EMA_D[9] */
+	{ pinmux(15), 1, 0 },  /* EMA_D[10] */
+	{ pinmux(15), 1, 1 },  /* EMA_D[11] */
+	{ pinmux(15), 1, 2 },  /* EMA_D[12] */
+	{ pinmux(15), 1, 3 },  /* EMA_D[13] */
+	{ pinmux(15), 1, 4 },  /* EMA_D[14] */
+	{ pinmux(15), 1, 5 },  /* EMA_D[15] */
+	{ pinmux(15), 1, 6 },  /* EMA_A[0] */
+	{ pinmux(15), 1, 7 },  /* EMA_A[1] */
+	{ pinmux(16), 1, 0 },  /* EMA_A[2] */
+	{ pinmux(16), 1, 1 },  /* EMA_A[3] */
+	{ pinmux(16), 1, 2 },  /* EMA_A[4] */
+	{ pinmux(16), 1, 3 },  /* EMA_A[5] */
+	{ pinmux(16), 1, 4 },  /* EMA_A[6] */
+	{ pinmux(16), 1, 5 },  /* EMA_A[7] */
+	{ pinmux(16), 1, 6 },  /* EMA_A[8] */
+	{ pinmux(16), 1, 7 },  /* EMA_A[9] */
+	{ pinmux(17), 1, 0 },  /* EMA_A[10] */
+	{ pinmux(17), 1, 1 },  /* EMA_A[11] */
+	{ pinmux(17), 1, 2 },  /* EMA_A[12] */
+	{ pinmux(17), 1, 3 },  /* EMA_BA[1] */
+	{ pinmux(17), 1, 4 },  /* EMA_BA[0] */
+	{ pinmux(17), 1, 5 },  /* EMA_CLK */
+	{ pinmux(17), 1, 6 },  /* EMA_SDCKE */
+	{ pinmux(17), 1, 7 },  /* EMA_CAS */
+	{ pinmux(18), 1, 0 },  /* EMA_CAS */
+	{ pinmux(18), 1, 1 },  /* EMA_WE */
+	{ pinmux(18), 1, 5 },  /* EMA_OE */
+	{ pinmux(18), 1, 6 },  /* EMA_WE_DQM[1] */
+	{ pinmux(18), 1, 7 },  /* EMA_WE_DQM[0] */
+	{ pinmux(10), 1, 0 }   /* Tristate */
+};
+#endif
+
+/* EMAC PHY interface pins */
+const struct pinmux_config emac_pins_rmii[] = {
+	{ pinmux(10), 2, 1 },  /* RMII_TXD[0] */
+	{ pinmux(10), 2, 2 },  /* RMII_TXD[1] */
+	{ pinmux(10), 2, 3 },  /* RMII_TXEN */
+	{ pinmux(10), 2, 4 },  /* RMII_CRS_DV */
+	{ pinmux(10), 2, 5 },  /* RMII_RXD[0] */
+	{ pinmux(10), 2, 6 },  /* RMII_RXD[1] */
+	{ pinmux(10), 2, 7 }   /* RMII_RXER */
+};
+
+const struct pinmux_config emac_pins_mdio[] = {
+	{ pinmux(11), 2, 0 },  /* MDIO_CLK */
+	{ pinmux(11), 2, 1 }   /* MDIO_D */
+};
+
+const struct pinmux_config emac_pins_rmii_clk_source[] = {
+	{ pinmux(9), 0, 5 }    /* ref.clk from external source */
+};
+
+/* UART2 pin muxer settings */
+const struct pinmux_config uart2_pins_txrx[] = {
+	{ pinmux(8), 2, 7 },   /* UART2_RXD */
+	{ pinmux(9), 2, 0 }    /* UART2_TXD */
+};
+
+/* I2C0 pin muxer settings */
+const struct pinmux_config i2c0_pins[] = {
+	{ pinmux(8), 2, 3 },   /* I2C0_SDA */
+	{ pinmux(8), 2, 4 }    /* I2C0_SCL */
+};
+
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+	{ pinmux(9), 1, 1 }    /* USB0_DRVVBUS */
+};
+
+#ifdef CONFIG_DAVINCI_MMC
+/* MMC0 pin muxer settings */
+const struct pinmux_config mmc0_pins_8bit[] = {
+	{ pinmux(15), 2, 7 },  /* MMCSD0_CLK */
+	{ pinmux(16), 2, 0 },  /* MMCSD0_CMD */
+	{ pinmux(13), 2, 6 },  /* MMCSD0_DAT_0 */
+	{ pinmux(13), 2, 7 },  /* MMCSD0_DAT_1 */
+	{ pinmux(14), 2, 0 },  /* MMCSD0_DAT_2 */
+	{ pinmux(14), 2, 1 },  /* MMCSD0_DAT_3 */
+	{ pinmux(14), 2, 2 },  /* MMCSD0_DAT_4 */
+	{ pinmux(14), 2, 3 },  /* MMCSD0_DAT_5 */
+	{ pinmux(14), 2, 4 },  /* MMCSD0_DAT_6 */
+	{ pinmux(14), 2, 5 }   /* MMCSD0_DAT_7 */
+	/* DA830 supports 8-bit mode */
+};
+#endif

+ 22 - 3
arch/arm/cpu/arm926ejs/mxs/mxs.c

@@ -76,13 +76,32 @@ void enable_caches(void)
 #endif
 }
 
+/*
+ * This function will craft a jumptable at 0x0 which will redirect interrupt
+ * vectoring to proper location of U-Boot in RAM.
+ *
+ * The structure of the jumptable will be as follows:
+ *  ldr pc, [pc, #0x18] ..... for each vector, thus repeated 8 times
+ *  <destination address> ... for each previous ldr, thus also repeated 8 times
+ *
+ * The "ldr pc, [pc, #0x18]" instruction above loads address from memory at
+ * offset 0x18 from current value of PC register. Note that PC is already
+ * incremented by 4 when computing the offset, so the effective offset is
+ * actually 0x20, this the associated <destination address>. Loading the PC
+ * register with an address performs a jump to that address.
+ */
 void mx28_fixup_vt(uint32_t start_addr)
 {
-	uint32_t *vt = (uint32_t *)0x20;
+	/* ldr pc, [pc, #0x18] */
+	const uint32_t ldr_pc = 0xe59ff018;
+	/* Jumptable location is 0x0 */
+	uint32_t *vt = (uint32_t *)0x0;
 	int i;
 
-	for (i = 0; i < 8; i++)
-		vt[i] = start_addr + (4 * i);
+	for (i = 0; i < 8; i++) {
+		vt[i] = ldr_pc;
+		vt[i + 8] = start_addr + (4 * i);
+	}
 }
 
 #ifdef	CONFIG_ARCH_MISC_INIT

+ 1 - 0
arch/arm/cpu/armv7/omap-common/Makefile

@@ -34,6 +34,7 @@ COBJS	+= hwinit-common.o
 COBJS	+= clocks-common.o
 COBJS	+= emif-common.o
 COBJS	+= vc.o
+COBJS	+= abb.o
 endif
 
 ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)

+ 137 - 0
arch/arm/cpu/armv7/omap-common/abb.c

@@ -0,0 +1,137 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+	return -1;
+}
+
+static void abb_setup_timings(u32 setup)
+{
+	u32 sys_rate, sr2_cnt, clk_cycles;
+
+	/*
+	 * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
+	 * transition and must be programmed with the correct time at boot.
+	 * The value programmed into the register is the number of SYS_CLK
+	 * clock cycles that match a given wall time profiled for the ldo.
+	 * This value depends on:
+	 * settling time of ldo in micro-seconds (varies per OMAP family),
+	 * of clock cycles per SYS_CLK period (varies per OMAP family),
+	 * the SYS_CLK frequency in MHz (varies per board)
+	 * The formula is:
+	 *
+	 *		       ldo settling time (in micro-seconds)
+	 * SR2_WTCNT_VALUE = ------------------------------------------
+	 *		    (# system clock cycles) * (sys_clk period)
+	 *
+	 * Put another way:
+	 *
+	 * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
+	 *
+	 * To avoid dividing by zero multiply both "# clock cycles" and
+	 * "settling time" by 10 such that the final result is the one we want.
+	 */
+
+	/* calculate SR2_WTCNT_VALUE */
+	sys_rate = DIV_ROUND(V_OSCK, 1000000);
+	clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+	sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+
+	setbits_le32(setup,
+		     sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
+}
+
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+	       u32 txdone, u32 txdone_mask, u32 opp)
+{
+	u32 abb_type_mask, opp_sel_mask;
+
+	/* sanity check */
+	if (!setup || !control || !txdone)
+		return;
+
+	/* setup ABB only in case of Fast or Slow OPP */
+	switch (opp) {
+	case OMAP_ABB_FAST_OPP:
+		abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK;
+		opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK;
+		break;
+	case OMAP_ABB_SLOW_OPP:
+		abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK;
+		opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK;
+		break;
+	default:
+	       return;
+	}
+
+	/*
+	 * For some OMAP silicons additional setup for LDOVBB register is
+	 * required. This is determined by data retrieved from corresponding
+	 * OPP EFUSE register. Data, which is retrieved from EFUSE - is
+	 * ABB enable/disable flag and VSET value, which must be copied
+	 * to LDOVBB register. If function call fails - return quietly,
+	 * it means no ABB is required for such silicon.
+	 *
+	 * For silicons, which don't require LDOVBB setup "fuse" and
+	 * "ldovbb" offsets are not defined. ABB will be initialized in
+	 * the common way for them.
+	 */
+	if (fuse && ldovbb) {
+		if (abb_setup_ldovbb(fuse, ldovbb))
+			return;
+	}
+
+	/* clear ABB registers */
+	writel(0, setup);
+	writel(0, control);
+
+	/* configure timings, based on oscillator value */
+	abb_setup_timings(setup);
+
+	/* clear pending interrupts before setup */
+	setbits_le32(txdone, txdone_mask);
+
+	/* select ABB type */
+	setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK);
+
+	/* initiate ABB ldo change */
+	setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK);
+
+	/* wait until transition complete */
+	if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY))
+		puts("Error: ABB txdone is not set\n");
+
+	/* clear ABB tranxdone */
+	setbits_le32(txdone, txdone_mask);
+}

+ 82 - 19
arch/arm/cpu/armv7/omap-common/clocks-common.c

@@ -30,9 +30,10 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <i2c.h>
 #include <asm/omap_common.h>
 #include <asm/gpio.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/utils.h>
 #include <asm/omap_gpio.h>
@@ -49,13 +50,12 @@
 
 const u32 sys_clk_array[8] = {
 	12000000,	       /* 12 MHz */
-	13000000,	       /* 13 MHz */
+	20000000,		/* 20 MHz */
 	16800000,	       /* 16.8 MHz */
 	19200000,	       /* 19.2 MHz */
 	26000000,	       /* 26 MHz */
 	27000000,	       /* 27 MHz */
 	38400000,	       /* 38.4 MHz */
-	20000000,		/* 20 MHz */
 };
 
 static inline u32 __get_sys_clk_index(void)
@@ -74,13 +74,6 @@ static inline u32 __get_sys_clk_index(void)
 		/* SYS_CLKSEL - 1 to match the dpll param array indices */
 		ind = (readl((*prcm)->cm_sys_clksel) &
 			CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
-		/*
-		 * SYS_CLKSEL value for 20MHz is 0. This is introduced newly
-		 * in DRA7XX socs. SYS_CLKSEL -1 will be greater than
-		 * NUM_SYS_CLK. So considering the last 3 bits as the index
-		 * for the dpll param array.
-		 */
-		ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
 	}
 	return ind;
 }
@@ -440,6 +433,12 @@ static void setup_non_essential_dplls(void)
 	params = get_abe_dpll_params(*dplls_data);
 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+
+	if (omap_revision() == DRA752_ES1_0)
+		/* Select the sys clk for dpll_abe */
+		clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
+				CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,
+				CM_ABE_PLL_SYS_CLKSEL_SYSCLK2);
 #else
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
 	/*
@@ -487,6 +486,10 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
 	u32 offset = volt_mv;
 	int ret = 0;
 
+	if (!volt_mv)
+		return;
+
+	pmic->pmic_bus_init();
 	/* See if we can first get the GPIO if needed */
 	if (pmic->gpio_en)
 		ret = gpio_request(pmic->gpio, "PMIC_GPIO");
@@ -509,14 +512,45 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
 	debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
 		offset_code);
 
-	if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
-				vcore_reg, offset_code))
+	if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code))
 		printf("Scaling voltage failed for 0x%x\n", vcore_reg);
 
 	if (pmic->gpio_en)
 		gpio_direction_output(pmic->gpio, 1);
 }
 
+static u32 optimize_vcore_voltage(struct volts const *v)
+{
+	u32 val;
+	if (!v->value)
+		return 0;
+	if (!v->efuse.reg)
+		return v->value;
+
+	switch (v->efuse.reg_bits) {
+	case 16:
+		val = readw(v->efuse.reg);
+		break;
+	case 32:
+		val = readl(v->efuse.reg);
+		break;
+	default:
+		printf("Error: efuse 0x%08x bits=%d unknown\n",
+		       v->efuse.reg, v->efuse.reg_bits);
+		return v->value;
+	}
+
+	if (!val) {
+		printf("Error: efuse 0x%08x bits=%d val=0, using %d\n",
+		       v->efuse.reg, v->efuse.reg_bits, v->value);
+		return v->value;
+	}
+
+	debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n",
+	      __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val);
+	return val;
+}
+
 /*
  * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
  * We set the maximum voltages allowed here because Smart-Reflex is not
@@ -525,16 +559,34 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
  */
 void scale_vcores(struct vcores_data const *vcores)
 {
-	omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+	u32 val;
+
+	val = optimize_vcore_voltage(&vcores->core);
+	do_scale_vcore(vcores->core.addr, val, vcores->core.pmic);
+
+	val = optimize_vcore_voltage(&vcores->mpu);
+	do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic);
+
+	/* Configure MPU ABB LDO after scale */
+	abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2,
+		  (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl,
+		  (*prcm)->prm_abbldo_mpu_setup,
+		  (*prcm)->prm_abbldo_mpu_ctrl,
+		  (*prcm)->prm_irqstatus_mpu_2,
+		  OMAP_ABB_MPU_TXDONE_MASK,
+		  OMAP_ABB_FAST_OPP);
 
-	do_scale_vcore(vcores->core.addr, vcores->core.value,
-					  vcores->core.pmic);
+	val = optimize_vcore_voltage(&vcores->mm);
+	do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic);
 
-	do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
-					  vcores->mpu.pmic);
+	val = optimize_vcore_voltage(&vcores->gpu);
+	do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic);
 
-	do_scale_vcore(vcores->mm.addr, vcores->mm.value,
-					  vcores->mm.pmic);
+	val = optimize_vcore_voltage(&vcores->eve);
+	do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic);
+
+	val = optimize_vcore_voltage(&vcores->iva);
+	do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
 
 	 if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
 		/* Configure LDO SRAM "magic" bits */
@@ -710,6 +762,7 @@ void prcm_init(void)
 	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
 		enable_basic_clocks();
+		timer_init();
 		scale_vcores(*omap_vcores);
 		setup_dplls();
 #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
@@ -725,3 +778,13 @@ void prcm_init(void)
 	if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context())
 		enable_basic_uboot_clocks();
 }
+
+void gpi2c_init(void)
+{
+	static int gpi2c = 1;
+
+	if (gpi2c) {
+		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		gpi2c = 0;
+	}
+}

+ 24 - 4
arch/arm/cpu/armv7/omap-common/emif-common.c

@@ -27,7 +27,7 @@
 
 #include <common.h>
 #include <asm/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
 #include <asm/utils.h>
@@ -209,7 +209,8 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
 	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
 
-	if (omap_revision() >= OMAP5430_ES1_0) {
+	if ((omap_revision() >= OMAP5430_ES1_0) ||
+				(omap_revision() == DRA752_ES1_0)) {
 		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
 			&emif->emif_l3_config);
 	} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -263,6 +264,18 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs)
 	__udelay(130);
 }
 
+static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+	config_data_eye_leveling_samples(base);
+
+	writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
+	writel(regs->sdram_config, &emif->emif_sdram_config);
+}
+
 static void ddr3_init(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -273,6 +286,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	 * defined, contents of mode Registers must be fully initialized.
 	 * H/W takes care of this initialization
 	 */
+	writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
 	writel(regs->sdram_config_init, &emif->emif_sdram_config);
 
 	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
@@ -290,7 +304,10 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	/* enable leveling */
 	writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
 
-	ddr3_leveling(base, regs);
+	if (omap_revision() == DRA752_ES1_0)
+		ddr3_sw_leveling(base, regs);
+	else
+		ddr3_leveling(base, regs);
 }
 
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -1078,7 +1095,10 @@ static void do_sdram_init(u32 base)
 	if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
 		set_lpmode_selfrefresh(base);
 		emif_reset_phy(base);
-		ddr3_leveling(base, regs);
+		if (omap_revision() == DRA752_ES1_0)
+			ddr3_sw_leveling(base, regs);
+		else
+			ddr3_leveling(base, regs);
 	}
 
 	/* Write to the shadow registers */

+ 0 - 2
arch/arm/cpu/armv7/omap-common/hwinit-common.c

@@ -166,8 +166,6 @@ void s_init(void)
 #endif
 	prcm_init();
 #ifdef CONFIG_SPL_BUILD
-	timer_init();
-
 	/* For regular u-boot sdram_init() is called from dram_init() */
 	sdram_init();
 #endif

+ 1 - 0
arch/arm/cpu/armv7/omap-common/timer.c

@@ -35,6 +35,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 

+ 13 - 1
arch/arm/cpu/armv7/omap-common/vc.c

@@ -17,6 +17,7 @@
 #include <common.h>
 #include <asm/omap_common.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
 
 /*
  * Define Master code if there are multiple masters on the I2C_SR bus.
@@ -57,7 +58,7 @@
  * omap_vc_init() - Initialization for Voltage controller
  * @speed_khz: I2C buspeed in KHz
  */
-void omap_vc_init(u16 speed_khz)
+static void omap_vc_init(u16 speed_khz)
 {
 	u32 val;
 	u32 sys_clk_khz, cycles_hi, cycles_low;
@@ -137,3 +138,14 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data)
 	/* All good.. */
 	return 0;
 }
+
+void sri2c_init(void)
+{
+	static int sri2c = 1;
+
+	if (sri2c) {
+		omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+		sri2c = 0;
+	}
+	return;
+}

+ 1 - 1
arch/arm/cpu/armv7/omap3/clock.c

@@ -27,7 +27,7 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/clocks_omap3.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>

+ 11 - 2
arch/arm/cpu/armv7/omap4/hw_data.c

@@ -29,7 +29,7 @@
 #include <asm/arch/omap.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/omap_gpio.h>
 #include <asm/io.h>
 
@@ -219,6 +219,9 @@ struct pmic_data twl6030_4430es1 = {
 	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
 };
 
 struct pmic_data twl6030 = {
@@ -226,6 +229,9 @@ struct pmic_data twl6030 = {
 	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
 };
 
 struct pmic_data tps62361 = {
@@ -233,7 +239,10 @@ struct pmic_data tps62361 = {
 	.step = 10000, /* 10 mV represented in uV */
 	.start_code = 0,
 	.gpio = TPS62361_VSEL0_GPIO,
-	.gpio_en = 1
+	.gpio_en = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
 };
 
 struct vcores_data omap4430_volts_es1 = {

+ 3 - 0
arch/arm/cpu/armv7/omap4/prcm-regs.c

@@ -301,6 +301,8 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
 	.control_ldosram_iva_voltage_ctrl	= 0x4A002320,
 	.control_ldosram_mpu_voltage_ctrl	= 0x4A002324,
 	.control_ldosram_core_voltage_ctrl	= 0x4A002328,
+	.control_usbotghs_ctrl			= 0x4A00233C,
+	.control_padconf_core_base		= 0x4A100000,
 	.control_pbiaslite			= 0x4A100600,
 	.control_lpddr2io1_0			= 0x4A100638,
 	.control_lpddr2io1_1			= 0x4A10063C,
@@ -312,4 +314,5 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
 	.control_lpddr2io2_3			= 0x4A100654,
 	.control_efuse_1			= 0x4A100700,
 	.control_efuse_2			= 0x4A100704,
+	.control_padconf_wkup_base		= 0x4A31E000,
 };

+ 1 - 0
arch/arm/cpu/armv7/omap5/Makefile

@@ -30,6 +30,7 @@ COBJS	+= emif.o
 COBJS	+= sdram.o
 COBJS	+= prcm-regs.o
 COBJS	+= hw_data.o
+COBJS	+= abb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))

+ 67 - 0
arch/arm/cpu/armv7/omap5/abb.c

@@ -0,0 +1,67 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP5 family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+
+/*
+ * Setup LDOVBB for OMAP5.
+ * On OMAP5+ some ABB settings are fused. They are handled
+ * in the following way:
+ *
+ * 1. corresponding EFUSE register contains ABB enable bit
+ *    and VSET value
+ * 2. If ABB enable bit is set to 1, than ABB should be
+ *    enabled, otherwise ABB should be disabled
+ * 3. If ABB is enabled, than VSET value should be copied
+ *    to corresponding MUX control register
+ */
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+	u32 vset;
+
+	/*
+	 * ABB parameters must be properly fused
+	 * otherwise ABB should be disabled
+	 */
+	vset = readl(fuse);
+	if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
+		return -1;
+
+	/* prepare VSET value for LDOVBB mux register */
+	vset &= OMAP5_ABB_FUSE_VSET_MASK;
+	vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
+	vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
+	vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
+
+	/* setup LDOVBB using fused value */
+	clrsetbits_le32(ldovbb,  OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
+
+	return 0;
+}

+ 121 - 46
arch/arm/cpu/armv7/omap5/hw_data.c

@@ -26,10 +26,11 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <palmas.h>
 #include <asm/arch/omap.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/omap_gpio.h>
 #include <asm/io.h>
 #include <asm/emif.h>
@@ -99,14 +100,13 @@ static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = {
 };
 
 static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
-	{250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
-	{50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+	{625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
 };
 
 static const struct dpll_params
@@ -132,15 +132,14 @@ static const struct dpll_params
 };
 
 static const struct dpll_params
-		core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = {
-	{266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 16.8 MHz */
-	{277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 19.2 MHz */
-	{368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 26 MHz   */
+		core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
+	{266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 12 MHz   */
+	{266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 20 MHz   */
+	{443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 16.8 MHz */
+	{277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 19.2 MHz */
+	{368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 38.4 MHz */
-	{266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}		/* 20 MHz   */
+	{277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 38.4 MHz */
 };
 
 static const struct dpll_params
@@ -186,14 +185,13 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
 };
 
 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
-	{32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
-	{20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
-	{192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 20 MHz   */
+	{160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 38.4 MHz */
-	{96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}		/* 20 MHz   */
+	{10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 38.4 MHz */
 };
 
 static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
@@ -206,6 +204,16 @@ static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
 	{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
 };
 
+static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
+	{1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz */
+	{208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
 /* ABE M & N values with sys_clk as source */
 static const struct dpll_params
 		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
@@ -223,26 +231,36 @@ static const struct dpll_params abe_dpll_params_32k_196608khz = {
 	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
 };
 
+/* ABE M & N values with sysclk2(22.5792 MHz) as input */
+static const struct dpll_params
+		abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+};
+
 static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
 	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 20 MHz   */
 	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
 	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
 	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
 	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
-	{48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
 };
 
-static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = {
-	{533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
-	{111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
+	{266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
-	{533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+	{665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
 };
 
 struct dplls omap5_dplls_es1 = {
@@ -275,10 +293,12 @@ struct dplls omap5_dplls_es2 = {
 
 struct dplls dra7xx_dplls = {
 	.mpu = mpu_dpll_params_1ghz,
-	.core = core_dpll_params_2128mhz_ddr532_dra7xx,
+	.core = core_dpll_params_2128mhz_dra7xx,
 	.per = per_dpll_params_768mhz_dra7xx,
+	.abe = abe_dpll_params_sysclk2_361267khz,
+	.iva = iva_dpll_params_2330mhz_dra7xx,
 	.usb = usb_dpll_params_1920mhz,
-	.ddr = ddr_dpll_params_1066mhz,
+	.ddr = ddr_dpll_params_2128mhz,
 };
 
 struct pmic_data palmas = {
@@ -289,6 +309,22 @@ struct pmic_data palmas = {
 	 * Offset code 0 switches OFF the SMPS
 	 */
 	.start_code = 6,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
+};
+
+struct pmic_data tps659038 = {
+	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+	.step = 10000, /* 10 mV represented in uV */
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	.start_code = 6,
+	.i2c_slave_addr	= TPS659038_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= gpi2c_init,
+	.pmic_write	= palmas_i2c_write_u8,
 };
 
 struct vcores_data omap5430_volts = {
@@ -319,6 +355,38 @@ struct vcores_data omap5430_volts_es2 = {
 	.mm.pmic = &palmas,
 };
 
+struct vcores_data dra752_volts = {
+	.mpu.value	= VDD_MPU_DRA752,
+	.mpu.efuse.reg	= STD_FUSE_OPP_VMIN_MPU_NOM,
+	.mpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.mpu.addr	= TPS659038_REG_ADDR_SMPS12_MPU,
+	.mpu.pmic	= &tps659038,
+
+	.eve.value	= VDD_EVE_DRA752,
+	.eve.efuse.reg	= STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.eve.addr	= TPS659038_REG_ADDR_SMPS45_EVE,
+	.eve.pmic	= &tps659038,
+
+	.gpu.value	= VDD_GPU_DRA752,
+	.gpu.efuse.reg	= STD_FUSE_OPP_VMIN_GPU_NOM,
+	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.gpu.addr	= TPS659038_REG_ADDR_SMPS6_GPU,
+	.gpu.pmic	= &tps659038,
+
+	.core.value	= VDD_CORE_DRA752,
+	.core.efuse.reg	= STD_FUSE_OPP_VMIN_CORE_NOM,
+	.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+	.core.addr	= TPS659038_REG_ADDR_SMPS7_CORE,
+	.core.pmic	= &tps659038,
+
+	.iva.value	= VDD_IVA_DRA752,
+	.iva.efuse.reg	= STD_FUSE_OPP_VMIN_IVA_NOM,
+	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.iva.addr	= TPS659038_REG_ADDR_SMPS8_IVA,
+	.iva.pmic	= &tps659038,
+};
+
 /*
  * Enable essential clock domains, modules and
  * do some additional special settings needed
@@ -383,12 +451,6 @@ void enable_basic_clocks(void)
 			 clk_modules_explicit_en_essential,
 			 1);
 
-	/* Select 384Mhz for GPU as its the POR for ES1.0 */
-	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_HYD_GCLK_MASK);
-	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_CORE_GCLK_MASK);
-
 	/* Enable SCRM OPT clocks for PER and CORE dpll */
 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
 			OPTFCLKEN_SCRM_PER_MASK);
@@ -540,6 +602,17 @@ const struct ctrl_ioregs ioregs_omap5432_es2 = {
 	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
 };
 
+const struct ctrl_ioregs ioregs_dra7xx_es1 = {
+	.ctrl_ddrch = 0x40404040,
+	.ctrl_lpddr2ch = 0x40404040,
+	.ctrl_ddr3ch = 0x80808080,
+	.ctrl_ddrio_0 = 0xbae8c631,
+	.ctrl_ddrio_1 = 0xb46318d8,
+	.ctrl_ddrio_2 = 0x84210000,
+	.ctrl_emif_sdram_config_ext = 0xb2c00000,
+	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
 void hw_data_init(void)
 {
 	u32 omap_rev = omap_revision();
@@ -565,7 +638,7 @@ void hw_data_init(void)
 	case DRA752_ES1_0:
 	*prcm = &dra7xx_prcm;
 	*dplls_data = &dra7xx_dplls;
-	*omap_vcores = &omap5430_volts_es2;
+	*omap_vcores = &dra752_volts;
 	*ctrl = &dra7xx_ctrl;
 	break;
 
@@ -582,14 +655,16 @@ void get_ioregs(const struct ctrl_ioregs **regs)
 	case OMAP5430_ES1_0:
 	case OMAP5430_ES2_0:
 		*regs = &ioregs_omap5430;
-	break;
+		break;
 	case OMAP5432_ES1_0:
 		*regs = &ioregs_omap5432_es1;
-	break;
+		break;
 	case OMAP5432_ES2_0:
-	case DRA752_ES1_0:
 		*regs = &ioregs_omap5432_es2;
-	break;
+		break;
+	case DRA752_ES1_0:
+		*regs = &ioregs_dra7xx_es1;
+		break;
 
 	default:
 		printf("\n INVALID OMAP REVISION ");

+ 16 - 8
arch/arm/cpu/armv7/omap5/hwinit.c

@@ -32,7 +32,7 @@
 #include <asm/armv7.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/sizes.h>
 #include <asm/utils.h>
 #include <asm/arch/gpio.h>
@@ -100,16 +100,21 @@ static void io_settings_ddr3(void)
 	writel(ioregs->ctrl_emif_sdram_config_ext,
 	       (*ctrl)->control_emif2_sdram_config_ext);
 
-	/* Disable DLL select */
-	io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
+	if (is_omap54xx()) {
+		/* Disable DLL select */
+		io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
 							& 0xFFEFFFFF);
-	writel(io_settings,
-		(*ctrl)->control_port_emif1_sdram_config);
+		writel(io_settings,
+			(*ctrl)->control_port_emif1_sdram_config);
 
-	io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
+		io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
 							& 0xFFEFFFFF);
-	writel(io_settings,
-		(*ctrl)->control_port_emif2_sdram_config);
+		writel(io_settings,
+			(*ctrl)->control_port_emif2_sdram_config);
+	} else {
+		writel(ioregs->ctrl_ddr_ctrl_ext_0,
+				(*ctrl)->control_ddr_control_ext_0);
+	}
 }
 
 /*
@@ -201,6 +206,9 @@ void srcomp_enable(void)
 	u32 sysclk_ind	= get_sys_clk_index();
 	u32 omap_rev	= omap_revision();
 
+	if (!is_omap54xx())
+		return;
+
 	mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
 	div_factor = srcomp_parameters[sysclk_ind].divide_factor;
 

+ 20 - 0
arch/arm/cpu/armv7/omap5/prcm-regs.c

@@ -298,6 +298,7 @@ struct prcm_regs const omap5_es1_prcm = {
 	.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
 	.prm_rstctrl = 0x4ae07b00,
 	.prm_rstst = 0x4ae07b04,
+	.prm_rsttime = 0x4ae07b08,
 	.prm_vc_val_bypass = 0x4ae07ba0,
 	.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
 	.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
@@ -307,10 +308,16 @@ struct prcm_regs const omap5_es1_prcm = {
 	.prm_sldo_mpu_ctrl = 0x4ae07bd0,
 	.prm_sldo_mm_setup = 0x4ae07bd4,
 	.prm_sldo_mm_ctrl = 0x4ae07bd8,
+
+	/* SCRM stuff, used by some boards */
+	.scrm_auxclk0 = 0x4ae0a310,
+	.scrm_auxclk1 = 0x4ae0a314,
 };
 
 struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_status				= 0x4A002134,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A0021B4,
+	.control_padconf_core_base		= 0x4A002800,
 	.control_paconf_global			= 0x4A002DA0,
 	.control_paconf_mode			= 0x4A002DA4,
 	.control_smart1io_padconf_0		= 0x4A002DA8,
@@ -358,6 +365,8 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
 	.control_emif1_sdram_config_ext		= 0x4AE0C144,
 	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C318,
+	.control_padconf_wkup_base		= 0x4AE0C800,
 	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
 	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
 	.control_padconf_mode			= 0x4AE0CDA8,
@@ -434,6 +443,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_east_side		= 0x4A002E7C,
 	.control_srcomp_west_side		= 0x4A002E80,
 	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
@@ -709,6 +719,9 @@ struct prcm_regs const omap5_es2_prcm = {
 	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
 	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
 
+	/* prm irqstatus regs */
+	.prm_irqstatus_mpu_2 = 0x4ae06014,
+
 	/* l4 wkup regs */
 	.cm_abe_pll_ref_clksel = 0x4ae0610c,
 	.cm_sys_clksel = 0x4ae06110,
@@ -740,6 +753,12 @@ struct prcm_regs const omap5_es2_prcm = {
 	.prm_sldo_mpu_ctrl = 0x4ae07cd0,
 	.prm_sldo_mm_setup = 0x4ae07cd4,
 	.prm_sldo_mm_ctrl = 0x4ae07cd8,
+	.prm_abbldo_mpu_setup = 0x4ae07cdc,
+	.prm_abbldo_mpu_ctrl = 0x4ae07ce0,
+
+	/* SCRM stuff, used by some boards */
+	.scrm_auxclk0 = 0x4ae0a310,
+	.scrm_auxclk1 = 0x4ae0a314,
 };
 
 struct prcm_regs const dra7xx_prcm = {
@@ -941,6 +960,7 @@ struct prcm_regs const dra7xx_prcm = {
 	/* l4 wkup regs */
 	.cm_abe_pll_ref_clksel			= 0x4ae0610c,
 	.cm_sys_clksel				= 0x4ae06110,
+	.cm_abe_pll_sys_clksel			= 0x4ae06118,
 	.cm_wkup_clkstctrl			= 0x4ae07800,
 	.cm_wkup_l4wkup_clkctrl			= 0x4ae07820,
 	.cm_wkup_wdtimer1_clkctrl		= 0x4ae07828,

+ 160 - 10
arch/arm/cpu/armv7/omap5/sdram.c

@@ -108,6 +108,7 @@ const struct emif_regs emif_regs_266_mhz_2cs = {
 const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
 	.sdram_config_init		= 0x61851B32,
 	.sdram_config			= 0x61851B32,
+	.sdram_config2			= 0x0,
 	.ref_ctrl			= 0x00001035,
 	.sdram_tim1			= 0xCCCF36B3,
 	.sdram_tim2			= 0x308F7FDA,
@@ -131,6 +132,7 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
 const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
 	.sdram_config_init              = 0x61851B32,
 	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x0,
 	.ref_ctrl                       = 0x00001035,
 	.sdram_tim1                     = 0xCCCF36B3,
 	.sdram_tim2                     = 0x308F7FDA,
@@ -151,6 +153,54 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
 	.emif_rd_wr_exec_thresh         = 0x40000305
 };
 
+const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
+	.sdram_config_init              = 0x61851ab2,
+	.sdram_config                   = 0x61851ab2,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0E20400A,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x009E009E,
+	.emif_ddr_ext_phy_ctrl_3        = 0x009E009E,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009E009E,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
+const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0020400A,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x009D009D,
+	.emif_ddr_ext_phy_ctrl_3        = 0x009D009D,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009D009D,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009D009D,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
 const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
@@ -159,11 +209,39 @@ const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.is_ma_present	= 0x1
 };
 
-const struct dmm_lisa_map_regs lisa_map_512M_x_1 = {
+/*
+ * DRA752 EVM board has 1.5 GB of memory
+ * EMIF1 --> 2Gb * 2 =  512MB
+ * EMIF2 --> 2Gb * 4 =  1GB
+ * so mapping 1GB interleaved and 512MB non-interleaved
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x80640300,
+	.dmm_lisa_map_2 = 0xC0500220,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+/*
+ * DRA752 EVM EMIF1 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
-	.dmm_lisa_map_2 = 0x0,
-	.dmm_lisa_map_3 = 0x80500100,
+	.dmm_lisa_map_2 = 0x80500100,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+/*
+ * DRA752 EVM EMIF2 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+	.dmm_lisa_map_2 = 0x80600200,
+	.dmm_lisa_map_3 = 0xFF020100,
 	.is_ma_present	= 0x1
 };
 
@@ -180,9 +258,20 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 		*regs = &emif_regs_532_mhz_2cs_es2;
 		break;
 	case OMAP5432_ES2_0:
+		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+		break;
 	case DRA752_ES1_0:
+		switch (emif_nr) {
+		case 1:
+			*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
+			break;
+		case 2:
+			*regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1;
+			break;
+		}
+		break;
 	default:
-		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+		*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
 	}
 }
 
@@ -201,7 +290,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
 		break;
 	case DRA752_ES1_0:
 	default:
-		*dmm_lisa_regs = &lisa_map_512M_x_1;
+		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
 	}
 
 }
@@ -252,7 +341,8 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000077
+	0x00000077,
+	0x0
 };
 
 const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -274,7 +364,8 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000057
+	0x00000057,
+	0x0
 };
 
 const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -296,7 +387,56 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000057
+	0x00000057,
+	0x0
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+	0x009E009E,
+	0x002E002E,
+	0x002E002E,
+	0x002E002E,
+	0x002E002E,
+	0x002E002E,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x0,
+	0x600020,
+	0x40010080,
+	0x8102040
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+	0x009D009D,
+	0x002D002D,
+	0x002D002D,
+	0x002D002D,
+	0x002D002D,
+	0x002D002D,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x0,
+	0x600020,
+	0x40010080,
+	0x8102040
 };
 
 const struct lpddr2_mr_regs mr_regs = {
@@ -307,7 +447,7 @@ const struct lpddr2_mr_regs mr_regs = {
 	.mr16	= MR16_REF_FULL_ARRAY
 };
 
-static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
 {
 	switch (omap_revision()) {
 	case OMAP5430_ES1_0:
@@ -318,7 +458,14 @@ static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
 		*regs = ddr3_ext_phy_ctrl_const_base_es1;
 		break;
 	case OMAP5432_ES2_0:
+		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+		break;
 	case DRA752_ES1_0:
+		if (emif_nr == 1)
+			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
+		else
+			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+		break;
 	default:
 		*regs = ddr3_ext_phy_ctrl_const_base_es2;
 
@@ -334,9 +481,12 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 {
 	u32 *ext_phy_ctrl_base = 0;
 	u32 *emif_ext_phy_ctrl_base = 0;
+	u32 emif_nr;
 	const u32 *ext_phy_ctrl_const_regs;
 	u32 i = 0;
 
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
 	ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
@@ -353,7 +503,7 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 	 * external phy 6-24 registers do not change with
 	 * ddr frequency
 	 */
-	emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs);
+	emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
 	for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
 		writel(ext_phy_ctrl_const_regs[i],
 		       emif_ext_phy_ctrl_base++);

+ 42 - 0
arch/arm/cpu/armv7/vf610/Makefile

@@ -0,0 +1,42 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).o
+
+COBJS	+= generic.o
+COBJS	+= timer.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

+ 324 - 0
arch/arm/cpu/armv7/vf610/generic.c

@@ -0,0 +1,324 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <netdev.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#ifdef CONFIG_MXC_OCOTP
+void enable_ocotp_clk(unsigned char enable)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 reg;
+
+	reg = readl(&ccm->ccgr6);
+	if (enable)
+		reg |= CCM_CCGR6_OCOTP_CTRL_MASK;
+	else
+		reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK;
+	writel(reg, &ccm->ccgr6);
+}
+#endif
+
+static u32 get_mcu_main_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_ccsr, ccm_cacrr, armclk_div;
+	u32 sysclk_sel, pll_pfd_sel = 0;
+	u32 freq = 0;
+
+	ccm_ccsr = readl(&ccm->ccsr);
+	sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK;
+	sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET;
+
+	ccm_cacrr = readl(&ccm->cacrr);
+	armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK;
+	armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET;
+	armclk_div += 1;
+
+	switch (sysclk_sel) {
+	case 0:
+		freq = FASE_CLK_FREQ;
+		break;
+	case 1:
+		freq = SLOW_CLK_FREQ;
+		break;
+	case 2:
+		pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK;
+		pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET;
+		if (pll_pfd_sel == 0)
+			freq = PLL2_MAIN_FREQ;
+		else if (pll_pfd_sel == 1)
+			freq = PLL2_PFD1_FREQ;
+		else if (pll_pfd_sel == 2)
+			freq = PLL2_PFD2_FREQ;
+		else if (pll_pfd_sel == 3)
+			freq = PLL2_PFD3_FREQ;
+		else if (pll_pfd_sel == 4)
+			freq = PLL2_PFD4_FREQ;
+		break;
+	case 3:
+		freq = PLL2_MAIN_FREQ;
+		break;
+	case 4:
+		pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK;
+		pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET;
+		if (pll_pfd_sel == 0)
+			freq = PLL1_MAIN_FREQ;
+		else if (pll_pfd_sel == 1)
+			freq = PLL1_PFD1_FREQ;
+		else if (pll_pfd_sel == 2)
+			freq = PLL1_PFD2_FREQ;
+		else if (pll_pfd_sel == 3)
+			freq = PLL1_PFD3_FREQ;
+		else if (pll_pfd_sel == 4)
+			freq = PLL1_PFD4_FREQ;
+		break;
+	case 5:
+		freq = PLL3_MAIN_FREQ;
+		break;
+	default:
+		printf("unsupported system clock select\n");
+	}
+
+	return freq / armclk_div;
+}
+
+static u32 get_bus_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cacrr, busclk_div;
+
+	ccm_cacrr = readl(&ccm->cacrr);
+
+	busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK;
+	busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET;
+	busclk_div += 1;
+
+	return get_mcu_main_clk() / busclk_div;
+}
+
+static u32 get_ipg_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cacrr, ipgclk_div;
+
+	ccm_cacrr = readl(&ccm->cacrr);
+
+	ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK;
+	ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET;
+	ipgclk_div += 1;
+
+	return get_bus_clk() / ipgclk_div;
+}
+
+static u32 get_uart_clk(void)
+{
+	return get_ipg_clk();
+}
+
+static u32 get_sdhc_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div;
+	u32 freq = 0;
+
+	ccm_cscmr1 = readl(&ccm->cscmr1);
+	sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK;
+	sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET;
+
+	ccm_cscdr2 = readl(&ccm->cscdr2);
+	sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK;
+	sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET;
+	sdhc_clk_div += 1;
+
+	switch (sdhc_clk_sel) {
+	case 0:
+		freq = PLL3_MAIN_FREQ;
+		break;
+	case 1:
+		freq = PLL3_PFD3_FREQ;
+		break;
+	case 2:
+		freq = PLL1_PFD3_FREQ;
+		break;
+	case 3:
+		freq = get_bus_clk();
+		break;
+	}
+
+	return freq / sdhc_clk_div;
+}
+
+u32 get_fec_clk(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	u32 ccm_cscmr2, rmii_clk_sel;
+	u32 freq = 0;
+
+	ccm_cscmr2 = readl(&ccm->cscmr2);
+	rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK;
+	rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET;
+
+	switch (rmii_clk_sel) {
+	case 0:
+		freq = ENET_EXTERNAL_CLK;
+		break;
+	case 1:
+		freq = AUDIO_EXTERNAL_CLK;
+		break;
+	case 2:
+		freq = PLL5_MAIN_FREQ;
+		break;
+	case 3:
+		freq = PLL5_MAIN_FREQ / 2;
+		break;
+	}
+
+	return freq;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ARM_CLK:
+		return get_mcu_main_clk();
+	case MXC_BUS_CLK:
+		return get_bus_clk();
+	case MXC_IPG_CLK:
+		return get_ipg_clk();
+	case MXC_UART_CLK:
+		return get_uart_clk();
+	case MXC_ESDHC_CLK:
+		return get_sdhc_clk();
+	case MXC_FEC_CLK:
+		return get_fec_clk();
+	default:
+		break;
+	}
+	return -1;
+}
+
+/* Dump some core clocks */
+int do_vf610_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
+			 char * const argv[])
+{
+	printf("\n");
+	printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000);
+	printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks,
+	"display clocks",
+	""
+);
+
+#ifdef CONFIG_FEC_MXC
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+	struct fuse_bank *bank = &ocotp->bank[4];
+	struct fuse_bank4_regs *fuse =
+		(struct fuse_bank4_regs *)bank->fuse_regs;
+
+	u32 value = readl(&fuse->mac_addr0);
+	mac[0] = (value >> 8);
+	mac[1] = value;
+
+	value = readl(&fuse->mac_addr1);
+	mac[2] = value >> 24;
+	mac[3] = value >> 16;
+	mac[4] = value >> 8;
+	mac[5] = value;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+static char *get_reset_cause(void)
+{
+	u32 cause;
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+	cause = readl(&src_regs->srsr);
+	writel(cause, &src_regs->srsr);
+	cause &= 0xff;
+
+	switch (cause) {
+	case 0x08:
+		return "WDOG";
+	case 0x20:
+		return "JTAG HIGH-Z";
+	case 0x80:
+		return "EXTERNAL RESET";
+	case 0xfd:
+		return "POR";
+	default:
+		return "unknown reset";
+	}
+}
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   Freescale Vybrid VF610 at %d MHz\n",
+		mxc_get_clock(MXC_ARM_CLK) / 1000000);
+	printf("Reset cause: %s\n", get_reset_cause());
+
+	return 0;
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+	int rc = -ENODEV;
+
+#if defined(CONFIG_FEC_MXC)
+	rc = fecmxc_initialize(bis);
+#endif
+
+	return rc;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(bd_t *bis)
+{
+	return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int get_clocks(void)
+{
+#ifdef CONFIG_FSL_ESDHC
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+#endif
+	return 0;
+}

+ 103 - 0
arch/arm/cpu/armv7/vf610/timer.c

@@ -0,0 +1,103 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+static struct pit_reg *cur_pit = (struct pit_reg *)PIT_BASE_ADDR;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TIMER_LOAD_VAL	0xffffffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, mxc_get_clock(MXC_IPG_CLK));
+
+	return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+	usec = usec * mxc_get_clock(MXC_IPG_CLK)  + 999999;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+int timer_init(void)
+{
+	__raw_writel(0, &cur_pit->mcr);
+
+	__raw_writel(TIMER_LOAD_VAL, &cur_pit->ldval1);
+	__raw_writel(0, &cur_pit->tctrl1);
+	__raw_writel(1, &cur_pit->tctrl1);
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+
+	return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+	ulong now = TIMER_LOAD_VAL - __raw_readl(&cur_pit->cval1);
+
+	/* increment tbu if tbl has rolled over */
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+ulong get_timer_masked(void)
+{
+	return tick_to_time(get_ticks());
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+/* delay x useconds AND preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+	unsigned long long start;
+	ulong tmo;
+
+	start = get_ticks();			/* get current timestamp */
+	tmo = us_to_tick(usec);			/* convert usecs to ticks */
+	while ((get_ticks() - start) < tmo)
+		;				/* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return mxc_get_clock(MXC_IPG_CLK);
+}

+ 1 - 1
arch/arm/cpu/pxa/pxa2xx.c

@@ -244,7 +244,7 @@ void pxa_clock_setup(void)
 {
 	writel(CONFIG_SYS_CKEN, CKEN);
 	writel(CONFIG_SYS_CCCR, CCCR);
-	asm volatile("mcr	p14, 0, %0, c6, c0, 0" : : "r"(2));
+	asm volatile("mcr	p14, 0, %0, c6, c0, 0" : : "r"(0x0b));
 
 	/* enable the 32Khz oscillator for RTC and PowerManager */
 	writel(OSCC_OON, OSCC);

+ 4 - 0
arch/arm/cpu/tegra-common/ap.c

@@ -109,6 +109,10 @@ static void enable_scu(void)
 	struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
 	u32 reg;
 
+	/* Only enable the SCU on T20/T25 */
+	if (tegra_get_chip() != CHIPID_TEGRA20)
+		return;
+
 	/* If SCU already setup/enabled, return */
 	if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
 		return;

+ 1 - 1
arch/arm/imx-common/Makefile

@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB     = $(obj)libimx-common.o
 
-ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6))
+ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 vf610))
 COBJS-y	= iomux-v3.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx5 mx6))

+ 6 - 0
arch/arm/imx-common/iomux-v3.c

@@ -48,8 +48,14 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 	if (sel_input_ofs)
 		__raw_writel(sel_input, base + sel_input_ofs);
 
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+	if (!(pad_ctrl & NO_PAD_CTRL))
+		__raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl,
+			base + pad_ctrl_ofs);
+#else
 	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
 		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+#endif
 }
 
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,

+ 14 - 1
arch/arm/include/asm/arch-davinci/pinmux_defs.h

@@ -22,8 +22,14 @@
 #define __ASM_ARCH_PINMUX_DEFS_H
 
 #include <asm/arch/davinci_misc.h>
+#include <config.h>
 
-/* SPI pin muxer settings */
+/* SPI0 pin muxer settings */
+extern const struct pinmux_config spi0_pins_base[3];
+extern const struct pinmux_config spi0_pins_scs0[1];
+extern const struct pinmux_config spi0_pins_ena[1];
+
+/* SPI1 pin muxer settings */
 extern const struct pinmux_config spi1_pins_base[3];
 extern const struct pinmux_config spi1_pins_scs0[1];
 
@@ -35,6 +41,7 @@ extern const struct pinmux_config uart2_pins_rtscts[2];
 
 /* EMAC pin muxer settings*/
 extern const struct pinmux_config emac_pins_rmii[7];
+extern const struct pinmux_config emac_pins_rmii_clk_source[1];
 extern const struct pinmux_config emac_pins_mii[15];
 extern const struct pinmux_config emac_pins_mdio[2];
 
@@ -43,13 +50,19 @@ extern const struct pinmux_config i2c0_pins[2];
 extern const struct pinmux_config i2c1_pins[2];
 
 /* EMIFA pin muxer settings */
+extern const struct pinmux_config emifa_pins[40];
+extern const struct pinmux_config emifa_pins_cs0[1];
 extern const struct pinmux_config emifa_pins_cs2[1];
 extern const struct pinmux_config emifa_pins_cs3[1];
 extern const struct pinmux_config emifa_pins_cs4[1];
 extern const struct pinmux_config emifa_pins_nand[12];
 extern const struct pinmux_config emifa_pins_nor[43];
 
+/* USB pin mux setting */
+extern const struct pinmux_config usb_pins[1];
+
 /* MMC pin muxer settings */
+extern const struct pinmux_config mmc0_pins_8bit[10];
 extern const struct pinmux_config mmc0_pins[6];
 
 #endif

+ 0 - 48
arch/arm/include/asm/arch-omap24xx/bits.h

@@ -1,48 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software;  you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0  (1<<0)
-#define BIT1  (1<<1)
-#define BIT2  (1<<2)
-#define BIT3  (1<<3)
-#define BIT4  (1<<4)
-#define BIT5  (1<<5)
-#define BIT6  (1<<6)
-#define BIT7  (1<<7)
-#define BIT8  (1<<8)
-#define BIT9  (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif

+ 0 - 112
arch/arm/include/asm/arch-omap24xx/clocks.h

@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
-  */
-#ifndef _OMAP24XX_CLOCKS_H_
-#define _OMAP24XX_CLOCKS_H_
-
-#define COMMIT_DIVIDERS  0x1
-
-#define MODE_BYPASS_FAST 0x2
-#define APLL_LOCK        0xc
-#ifdef CONFIG_APTIX
-#define DPLL_LOCK        0x1   /* stay in bypass mode */
-#else
-#define DPLL_LOCK        0x3   /* DPLL lock */
-#endif
-
-/****************************************************************************;
-; PRCM Scheme II
-;
-; Enable clocks and DPLL for:
-;  DPLL=300,	DPLLout=600	M=1,N=50   CM_CLKSEL1_PLL[21:8]  12/2*50
-;  Core=600	(core domain)   DPLLx2     CM_CLKSEL2_PLL[1:0]
-;  MPUF=300	(mpu domain)    2          CM_CLKSEL_MPU[4:0]
-;  DSPF=200    (dsp domain)    3          CM_CLKSEL_DSP[4:0]
-;  DSPI=100                    6          CM_CLKSEL_DSP[6:5]
-;  DSP_S          bypass	               CM_CLKSEL_DSP[7]
-;  IVAF=200    (dsp domain)    3          CM_CLKSEL_DSP[12:8]
-;  IVAF=100        auto
-;  IVAI            auto
-;  IVA_MPU         auto
-;  IVA_S          bypass                  CM_CLKSEL_DSP[13]
-;  GFXF=50      (gfx domain)	12         CM_CLKSEL_FGX[2:0]
-;  SSI_SSRF=200                 3         CM_CLKSEL1_CORE[24:20]
-;  SSI_SSTF=100     auto
-;  L3=100Mhz (sdram)            6         CM_CLKSEL1_CORE[4:0]
-;  L4=100Mhz                    6
-;  C_L4_USB=50                 12         CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define II_DPLL_OUT_X2   0x2    /* x2 core out */
-#define II_MPU_DIV       0x2    /* mpu = core/2 */
-#define II_DSP_DIV       0x343  /* dsp & iva divider */
-#define II_GFX_DIV       0x2
-#define II_BUS_DIV       0x04601026
-#define II_DPLL_300      0x01832100
-
-/****************************************************************************;
-; PRCM Scheme III
-;
-; Enable clocks and DPLL for:
-;  DPLL=266,	DPLLout=532	M=5+1,N=133 CM_CLKSEL1_PLL[21:8]  12/6*133=266
-;  Core=532	(core domain)   DPLLx2      CM_CLKSEL2_PLL[1:0]
-;  MPUF=266	(mpu domain)    /2          CM_CLKSEL_MPU[4:0]
-;  DSPF=177.3     (dsp domain)  /3          CM_CLKSEL_DSP[4:0]
-;  DSPI=88.67                   /6          CM_CLKSEL_DSP[6:5]
-;  DSP_S         ACTIVATED	            CM_CLKSEL_DSP[7]
-;  IVAF=88.67    (dsp domain)   /3          CM_CLKSEL_DSP[12:8]
-;  IVAF=88.67        auto
-;  IVAI            auto
-;  IVA_MPU         auto
-;  IVA_S         ACTIVATED                  CM_CLKSEL_DSP[13]
-;  GFXF=66.5      (gfx domain)	/8          CM_CLKSEL_FGX[2:0]:
-;  SSI_SSRF=177.3               /3          CM_CLKSEL1_CORE[24:20]
-;  SSI_SSTF=88.67     auto
-;  L3=133Mhz (sdram)            /4          CM_CLKSEL1_CORE[4:0]
-;  L4=66.5Mhz                   /8
-;  C_L4_USB=33.25               /16         CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define III_DPLL_OUT_X2   0x2    /* x2 core out */
-#define III_MPU_DIV       0x2    /* mpu = core/2 */
-#define III_DSP_DIV       0x23C3 /* dsp & iva divider sych enabled*/
-#define III_GFX_DIV       0x2
-#define III_BUS_DIV       0x08301044
-#define III_DPLL_266      0x01885500
-
-/* set defaults for boot up */
-#ifdef PRCM_CONFIG_II
-# define DPLL_OUT         II_DPLL_OUT_X2
-# define MPU_DIV          II_MPU_DIV
-# define DSP_DIV          II_DSP_DIV
-# define GFX_DIV          II_GFX_DIV
-# define BUS_DIV          II_BUS_DIV
-# define DPLL_VAL         II_DPLL_300
-#elif PRCM_CONFIG_III
-# define DPLL_OUT         III_DPLL_OUT_X2
-# define MPU_DIV          III_MPU_DIV
-# define DSP_DIV          III_DSP_DIV
-# define GFX_DIV          III_GFX_DIV
-# define BUS_DIV          III_BUS_DIV
-# define DPLL_VAL         III_DPLL_266
-#endif
-
-/* lock delay time out */
-#define LDELAY           12000000
-
-#endif

+ 0 - 68
arch/arm/include/asm/arch-omap24xx/i2c.h

@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_I2C_H_
-#define _OMAP24XX_I2C_H_
-
-#define I2C_BASE1		0x48070000
-#define I2C_BASE2               0x48072000 /* nothing hooked up on h4 */
-
-#define I2C_DEFAULT_BASE	I2C_BASE1
-
-struct i2c {
-	unsigned short rev;	/* 0x00 */
-	unsigned short res1;
-	unsigned short ie;	/* 0x04 */
-	unsigned short res2;
-	unsigned short stat;	/* 0x08 */
-	unsigned short res3;
-	unsigned short iv;	/* 0x0C */
-	unsigned short res4;
-	unsigned short syss;	/* 0x10 */
-	unsigned short res4p1;
-	unsigned short buf;	/* 0x14 */
-	unsigned short res5;
-	unsigned short cnt;	/* 0x18 */
-	unsigned short res6;
-	unsigned short data;	/* 0x1C */
-	unsigned short res7;
-	unsigned short sysc;	/* 0x20 */
-	unsigned short res8;
-	unsigned short con;	/* 0x24 */
-	unsigned short res9;
-	unsigned short oa;	/* 0x28 */
-	unsigned short res10;
-	unsigned short sa;	/* 0x2C */
-	unsigned short res11;
-	unsigned short psc;	/* 0x30 */
-	unsigned short res12;
-	unsigned short scll;	/* 0x34 */
-	unsigned short res13;
-	unsigned short sclh;	/* 0x38 */
-	unsigned short res14;
-	unsigned short systest;	/* 0x3c */
-	unsigned short res15;
-};
-
-#define I2C_BUS_MAX	2
-
-#endif

+ 0 - 156
arch/arm/include/asm/arch-omap24xx/mem.h

@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_MEM_H_
-#define _OMAP24XX_MEM_H_
-
-#define SDRC_CS0_OSET	 0x0
-#define SDRC_CS1_OSET	 0x30  /* mirror CS1 regs appear offset 0x30 from CS0 */
-
-#ifndef __ASSEMBLY__
-/* struct's for holding data tables for current boards, they are getting used
-   early in init when NO global access are there */
-struct sdrc_data_s {
-	u32    sdrc_sharing;
-	u32    sdrc_mdcfg_0_ddr;
-	u32    sdrc_mdcfg_0_sdr;
-	u32    sdrc_actim_ctrla_0;
-	u32    sdrc_actim_ctrlb_0;
-	u32    sdrc_rfr_ctrl;
-	u32    sdrc_mr_0_ddr;
-	u32    sdrc_mr_0_sdr;
-	u32    sdrc_dllab_ctrl;
-} /*__attribute__ ((packed))*/;
-typedef struct sdrc_data_s sdrc_data_t;
-
-typedef enum {
-	STACKED		= 0,
-	IP_DDR		= 1,
-	COMBO_DDR	= 2,
-	IP_SDR		= 3,
-} mem_t;
-
-#endif
-
-/* Slower full frequency range default timings for x32 operation*/
-#define H4_2420_SDRC_SHARING		0x00000100
-#define H4_2420_SDRC_MDCFG_0_SDR	0x00D04010 /* discrete sdr module */
-#define H4_2420_SDRC_MR_0_SDR		0x00000031
-#define H4_2420_SDRC_MDCFG_0_DDR	0x01702011 /* descrite ddr module */
-#define H4_2420_COMBO_MDCFG_0_DDR	0x00801011 /* combo module */
-#define H4_2420_SDRC_MR_0_DDR		0x00000032
-
-#define H4_2422_SDRC_SHARING		0x00004b00
-#define H4_2422_SDRC_MDCFG_0_DDR	0x00801011 /* stacked ddr on 2422 */
-#define H4_2422_SDRC_MR_0_DDR		0x00000032
-
-/* ES1 work around timings */
-#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1	0x9bead909  /* 165Mhz for use with 100/133 */
-#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1	0x00000020
-#define H4_242x_SDRC_RFR_CTRL_ES1	    0x00002401	/* use over refresh for ES1 */
-
-/* optimized timings good for current shipping parts */
-#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz  0x5A59B485
-#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz  0x0000000e
-#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz  0x8BA6E6C8 /* temp warn 0 settings */
-#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz  0x00000010 /* temp warn 0 settings */
-#define H4_242X_SDRC_RFR_CTRL_100MHz	   0x0002da01
-#define H4_242X_SDRC_RFR_CTRL_133MHz	   0x0003de01
-#define H4_242x_SDRC_DLLAB_CTRL_100MHz	   0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/
-#define H4_242x_SDRC_DLLAB_CTRL_133MHz	   0x0000690E /* 72deg, for ES2 */
-
-#ifdef PRCM_CONFIG_II
-# define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2420_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-#elif PRCM_CONFIG_III
-# define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
-# define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_133MHz
-# define H4_2420_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_133MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-#endif
-
-
-/* GPMC settings */
-#ifdef PRCM_CONFIG_II	     /* L3 at 100MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-#  define H4_24XX_GPMC_CONFIG1_0   0x0
-#  define H4_24XX_GPMC_CONFIG2_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG3_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
-#  define H4_24XX_GPMC_CONFIG5_0   0x010C1414
-#  define H4_24XX_GPMC_CONFIG6_0   0x00000A80
-# else	/* else NOR */
-#  define H4_24XX_GPMC_CONFIG1_0   0x3
-#  define H4_24XX_GPMC_CONFIG2_0   0x000f0f01
-#  define H4_24XX_GPMC_CONFIG3_0   0x00050502
-#  define H4_24XX_GPMC_CONFIG4_0   0x0C060C06
-#  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1	  0x00011000
-# define H4_24XX_GPMC_CONFIG2_1	  0x001F1F00
-# define H4_24XX_GPMC_CONFIG3_1	  0x00080802
-# define H4_24XX_GPMC_CONFIG4_1	  0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1	  0x031A1F1F
-# define H4_24XX_GPMC_CONFIG6_1	  0x000003C2
-# define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif PRCM_CONFIG_II */
-
-#ifdef PRCM_CONFIG_III	/* L3 at 133MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-#  define H4_24XX_GPMC_CONFIG1_0   0x0
-#  define H4_24XX_GPMC_CONFIG2_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG3_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
-#  define H4_24XX_GPMC_CONFIG5_0   0x010C1414
-#  define H4_24XX_GPMC_CONFIG6_0   0x00000A80
-# else	/* NOR boot */
-#  define H4_24XX_GPMC_CONFIG1_0   0x3
-#  define H4_24XX_GPMC_CONFIG2_0   0x00151501
-#  define H4_24XX_GPMC_CONFIG3_0   0x00060602
-#  define H4_24XX_GPMC_CONFIG4_0   0x10081008
-#  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-#  define H4_24XX_GPMC_CONFIG6_0   0x000004c4
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1	  0x00011000
-# define H4_24XX_GPMC_CONFIG2_1	  0x001f1f01
-# define H4_24XX_GPMC_CONFIG3_1	  0x00080803
-# define H4_24XX_GPMC_CONFIG4_1	  0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1	  0x041f1F1F
-# define H4_24XX_GPMC_CONFIG6_1	  0x000004C4
-# define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif CONFIG_SYS_PRCM_III */
-
-#endif /* endif _OMAP24XX_MEM_H_ */

+ 0 - 176
arch/arm/include/asm/arch-omap24xx/mux.h

@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP2420_MUX_H_
-#define _OMAP2420_MUX_H_
-
-#ifndef __ASSEMBLY__
-typedef  unsigned char uint8;
-typedef  unsigned int uint32;
-
-void muxSetupSDRC(void);
-void muxSetupGPMC(void);
-void muxSetupUsb0(void);
-void muxSetupUsbHost(void);
-void muxSetupUart3(void);
-void muxSetupI2C1(void);
-void muxSetupUART1(void);
-void muxSetupLCD(void);
-void muxSetupCamera(void);
-void muxSetupMMCSD(void) ;
-void muxSetupTouchScreen(void) ;
-void muxSetupHDQ(void);
-#endif
-
-#define USB_OTG_CTRL			        ((volatile uint32 *)0x4805E30C)
-
-/* Pin Muxing registers used for HDQ (Smart battery) */
-#define CONTROL_PADCONF_HDQ_SIO         ((volatile unsigned char *)0x48000115)
-
-/* Pin Muxing registers used for GPMC */
-#define CONTROL_PADCONF_GPMC_D2_BYTE0	((volatile unsigned char *)0x48000088)
-#define CONTROL_PADCONF_GPMC_D2_BYTE1	((volatile unsigned char *)0x48000089)
-#define CONTROL_PADCONF_GPMC_D2_BYTE2	((volatile unsigned char *)0x4800008A)
-#define CONTROL_PADCONF_GPMC_D2_BYTE3	((volatile unsigned char *)0x4800008B)
-
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE0	((volatile unsigned char *)0x4800008C)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE1	((volatile unsigned char *)0x4800008D)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE2	((volatile unsigned char *)0x4800008E)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE3	((volatile unsigned char *)0x4800008F)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE4	(0x48000090)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE5	(0x48000091)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE6	(0x48000092)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE7	(0x48000093)
-
-/* Pin Muxing registers used for SDRC */
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3)
-
-#define CONTROL_PADCONF_SDRC_A14_BYTE0	((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A14_BYTE1	((volatile unsigned char *)0x48000031)
-#define CONTROL_PADCONF_SDRC_A14_BYTE2	((volatile unsigned char *)0x48000032)
-#define CONTROL_PADCONF_SDRC_A14_BYTE3	((volatile unsigned char *)0x48000033)
-
-/* Pin Muxing registers used for Touch Screen (SPI) */
-#define CONTROL_PADCONF_SPI1_CLK        ((volatile unsigned char *)0x480000FF)
-#define CONTROL_PADCONF_SPI1_SIMO       ((volatile unsigned char *)0x48000100)
-#define CONTROL_PADCONF_SPI1_SOMI       ((volatile unsigned char *)0x48000101)
-#define CONTROL_PADCONF_SPI1_NCS0       ((volatile unsigned char *)0x48000102)
-#define CONTROL_PADCONF_SPI1_NCS1       (0x48000103)
-
-#define CONTROL_PADCONF_MCBSP1_FSR      ((volatile unsigned char *)0x4800010B)
-
-/* Pin Muxing registers used for MMCSD */
-#define CONTROL_PADCONF_MMC_CLKI        ((volatile unsigned char *)0x480000FE)
-#define CONTROL_PADCONF_MMC_CLKO        ((volatile unsigned char *)0x480000F3)
-#define CONTROL_PADCONF_MMC_CMD         ((volatile unsigned char *)0x480000F4)
-#define CONTROL_PADCONF_MMC_DAT0        ((volatile unsigned char *)0x480000F5)
-#define CONTROL_PADCONF_MMC_DAT1        ((volatile unsigned char *)0x480000F6)
-#define CONTROL_PADCONF_MMC_DAT2        ((volatile unsigned char *)0x480000F7)
-#define CONTROL_PADCONF_MMC_DAT3        ((volatile unsigned char *)0x480000F8)
-#define CONTROL_PADCONF_MMC_DAT_DIR0    ((volatile unsigned char *)0x480000F9)
-#define CONTROL_PADCONF_MMC_DAT_DIR1    ((volatile unsigned char *)0x480000FA)
-#define CONTROL_PADCONF_MMC_DAT_DIR2    ((volatile unsigned char *)0x480000FB)
-#define CONTROL_PADCONF_MMC_DAT_DIR3    ((volatile unsigned char *)0x480000FC)
-#define CONTROL_PADCONF_MMC_CMD_DIR     ((volatile unsigned char *)0x480000FD)
-
-#define CONTROL_PADCONF_SDRC_A14        ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A13        ((volatile unsigned char *)0x48000031)
-
-/* Pin Muxing registers used for CAMERA */
-#define CONTROL_PADCONF_SYS_NRESWARM    ((volatile unsigned char *)0x4800012B)
-
-#define CONTROL_PADCONF_CAM_XCLK        ((volatile unsigned char *)0x480000DC)
-#define CONTROL_PADCONF_CAM_LCLK        ((volatile unsigned char *)0x480000DB)
-#define CONTROL_PADCONF_CAM_VS          ((volatile unsigned char *)0x480000DA)
-#define CONTROL_PADCONF_CAM_HS          ((volatile unsigned char *)0x480000D9)
-#define CONTROL_PADCONF_CAM_D0          ((volatile unsigned char *)0x480000D8)
-#define CONTROL_PADCONF_CAM_D1          ((volatile unsigned char *)0x480000D7)
-#define CONTROL_PADCONF_CAM_D2          ((volatile unsigned char *)0x480000D6)
-#define CONTROL_PADCONF_CAM_D3          ((volatile unsigned char *)0x480000D5)
-#define CONTROL_PADCONF_CAM_D4          ((volatile unsigned char *)0x480000D4)
-#define CONTROL_PADCONF_CAM_D5          ((volatile unsigned char *)0x480000D3)
-#define CONTROL_PADCONF_CAM_D6          ((volatile unsigned char *)0x480000D2)
-#define CONTROL_PADCONF_CAM_D7          ((volatile unsigned char *)0x480000D1)
-#define CONTROL_PADCONF_CAM_D8          ((volatile unsigned char *)0x480000D0)
-#define CONTROL_PADCONF_CAM_D9          ((volatile unsigned char *)0x480000CF)
-
-/* Pin Muxing registers used for LCD */
-#define CONTROL_PADCONF_DSS_D0          ((volatile unsigned char *)0x480000B3)
-#define CONTROL_PADCONF_DSS_D1          ((volatile unsigned char *)0x480000B4)
-#define CONTROL_PADCONF_DSS_D2          ((volatile unsigned char *)0x480000B5)
-#define CONTROL_PADCONF_DSS_D3          ((volatile unsigned char *)0x480000B6)
-#define CONTROL_PADCONF_DSS_D4          ((volatile unsigned char *)0x480000B7)
-#define CONTROL_PADCONF_DSS_D5          ((volatile unsigned char *)0x480000B8)
-#define CONTROL_PADCONF_DSS_D6          ((volatile unsigned char *)0x480000B9)
-#define CONTROL_PADCONF_DSS_D7          ((volatile unsigned char *)0x480000BA)
-#define CONTROL_PADCONF_DSS_D8          ((volatile unsigned char *)0x480000BB)
-#define CONTROL_PADCONF_DSS_D9          ((volatile unsigned char *)0x480000BC)
-#define CONTROL_PADCONF_DSS_D10         ((volatile unsigned char *)0x480000BD)
-#define CONTROL_PADCONF_DSS_D11         ((volatile unsigned char *)0x480000BE)
-#define CONTROL_PADCONF_DSS_D12         ((volatile unsigned char *)0x480000BF)
-#define CONTROL_PADCONF_DSS_D13         ((volatile unsigned char *)0x480000C0)
-#define CONTROL_PADCONF_DSS_D14         ((volatile unsigned char *)0x480000C1)
-#define CONTROL_PADCONF_DSS_D15         ((volatile unsigned char *)0x480000C2)
-#define CONTROL_PADCONF_DSS_D16         ((volatile unsigned char *)0x480000C3)
-#define CONTROL_PADCONF_DSS_D17         ((volatile unsigned char *)0x480000C4)
-#define CONTROL_PADCONF_DSS_PCLK        ((volatile unsigned char *)0x480000CB)
-#define CONTROL_PADCONF_DSS_VSYNC       ((volatile unsigned char *)0x480000CC)
-#define CONTROL_PADCONF_DSS_HSYNC       ((volatile unsigned char *)0x480000CD)
-#define CONTROL_PADCONF_DSS_ACBIAS      ((volatile unsigned char *)0x480000CE)
-
-/* Pin Muxing registers used for UART1 */
-#define CONTROL_PADCONF_UART1_CTS       ((volatile unsigned char *)0x480000C5)
-#define CONTROL_PADCONF_UART1_RTS       ((volatile unsigned char *)0x480000C6)
-#define CONTROL_PADCONF_UART1_TX        ((volatile unsigned char *)0x480000C7)
-#define CONTROL_PADCONF_UART1_RX        ((volatile unsigned char *)0x480000C8)
-
-/* Pin Muxing registers used for I2C1 */
-#define CONTROL_PADCONF_I2C1_SCL        ((volatile unsigned char *)0x48000111)
-#define CONTROL_PADCONF_I2C1_SDA        ((volatile unsigned char *)0x48000112)
-
-/* Pin Muxing registres used for USB0. */
-#define CONTROL_PADCONF_USB0_PUEN		((volatile uint8 *)0x4800011D)
-#define CONTROL_PADCONF_USB0_VP			((volatile uint8 *)0x4800011E)
-#define CONTROL_PADCONF_USB0_VM			((volatile uint8 *)0x4800011F)
-#define CONTROL_PADCONF_USB0_RCV		((volatile uint8 *)0x48000120)
-#define CONTROL_PADCONF_USB0_TXEN		((volatile uint8 *)0x48000121)
-#define CONTROL_PADCONF_USB0_SE0		((volatile uint8 *)0x48000122)
-#define CONTROL_PADCONF_USB0_DAT		((volatile uint8 *)0x48000123)
-
-/* Pin Muxing registres used for USB1. */
-#define CONTROL_PADCONF_USB1_RCV	(0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN	(0x480000EC)
-
-/* Pin Muxing registers used for UART3/IRDA */
-#define CONTROL_PADCONF_UART3_TX_IRTX	((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_UART3_RX_IRRX	((volatile uint8 *)0x48000119)
-
-/* Pin Muxing registers used for GPIO */
-#define CONTROL_PADCONF_GPIO69		(0x480000ED)
-#define CONTROL_PADCONF_GPIO70		(0x480000EE)
-#define CONTROL_PADCONF_GPIO102		(0x48000116)
-#define CONTROL_PADCONF_GPIO103		(0x48000117)
-#define CONTROL_PADCONF_GPIO104		(0x48000118)
-#define CONTROL_PADCONF_GPIO105		(0x48000119)
-
-#endif

+ 0 - 236
arch/arm/include/asm/arch-omap24xx/omap2420.h

@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/sizes.h>
-
-/*
- * 2420 specific Section
- */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0        0x68005048
-#define A_READPERM0           0x68005050
-#define A_WRITEPERM0          0x68005058
-/* #define GP_DEVICE	(BIT8|BIT9)  FIXME -- commented out to make compile -- FIXME */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0        0x68005048
-#define A_READPERM0           0x68005050
-#define A_WRITEPERM0          0x68005058
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE    (0x48000000)
-#define CONTROL_STATUS        (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* device type */
-#define TST_DEVICE	0x0
-#define EMU_DEVICE	0x1
-#define HS_DEVICE	0x2
-#define GP_DEVICE	0x3
-
-/* TAP information */
-#define OMAP2420_TAP_BASE     (0x48014000)
-#define TAP_IDCODE_REG        (OMAP2420_TAP_BASE+0x204)
-#define PRODUCTION_ID         (OMAP2420_TAP_BASE+0x208)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE    (0x6800A000)
-#define GPMC_SYSCONFIG        (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_IRQENABLE        (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL  (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG           (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0        (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0        (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0        (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0        (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0        (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0        (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0	      (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1        (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1        (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1        (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1        (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1        (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1        (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1	      (OMAP2420_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_2        (OMAP2420_GPMC_BASE+0xC0)
-#define GPMC_CONFIG2_2        (OMAP2420_GPMC_BASE+0xC4)
-#define GPMC_CONFIG3_2        (OMAP2420_GPMC_BASE+0xC8)
-#define GPMC_CONFIG4_2        (OMAP2420_GPMC_BASE+0xCC)
-#define GPMC_CONFIG5_2        (OMAP2420_GPMC_BASE+0xD0)
-#define GPMC_CONFIG6_2        (OMAP2420_GPMC_BASE+0xD4)
-#define GPMC_CONFIG7_2        (OMAP2420_GPMC_BASE+0xD8)
-#define GPMC_CONFIG1_3        (OMAP2420_GPMC_BASE+0xF0)
-#define GPMC_CONFIG2_3        (OMAP2420_GPMC_BASE+0xF4)
-#define GPMC_CONFIG3_3        (OMAP2420_GPMC_BASE+0xF8)
-#define GPMC_CONFIG4_3        (OMAP2420_GPMC_BASE+0xFC)
-#define GPMC_CONFIG5_3        (OMAP2420_GPMC_BASE+0x100)
-#define GPMC_CONFIG6_3        (OMAP2420_GPMC_BASE+0x104)
-#define GPMC_CONFIG7_3	      (OMAP2420_GPMC_BASE+0x108)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG     (OMAP2420_SMS_BASE+0x10)
-#define SMS_CLASS_ARB0    (OMAP2420_SMS_BASE+0xD0)
-# define BURSTCOMPLETE_GROUP7    BIT31
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG     (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS        (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_CS_CFG        (OMAP2420_SDRC_BASE+0x40)
-#define SDRC_SHARING       (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL     (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLB_CTRL     (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER         (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0        (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0          (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL      (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0      (OMAP2420_SDRC_BASE+0xA8)
-#define OMAP2420_SDRC_CS0  0x80000000
-#define OMAP2420_SDRC_CS1  0xA0000000
-#define CMD_NOP            0x0
-#define CMD_PRECHARGE      0x1
-#define CMD_AUTOREFRESH    0x2
-#define CMD_ENTR_PWRDOWN   0x3
-#define CMD_EXIT_PWRDOWN   0x4
-#define CMD_ENTR_SRFRSH    0x5
-#define CMD_CKE_HIGH       0x6
-#define CMD_CKE_LOW        0x7
-#define SOFTRESET          BIT1
-#define SMART_IDLE         (0x2 << 3)
-#define REF_ON_IDLE        (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1	      0x4806A000
-#define OMAP2420_UART2	      0x4806C000
-#define OMAP2420_UART3        0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1         0x48028000
-#define OMAP2420_GPT2         0x4802A000
-#define OMAP2420_GPT3         0x48078000
-#define OMAP2420_GPT4         0x4807A000
-#define OMAP2420_GPT5         0x4807C000
-#define OMAP2420_GPT6         0x4807E000
-#define OMAP2420_GPT7         0x48080000
-#define OMAP2420_GPT8         0x48082000
-#define OMAP2420_GPT9         0x48084000
-#define OMAP2420_GPT10        0x48086000
-#define OMAP2420_GPT11        0x48088000
-#define OMAP2420_GPT12        0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR       0x0      /* r */
-#define TIOCP_CFG  0x10     /* rw */
-#define TISTAT     0x14     /* r */
-#define TISR       0x18     /* rw */
-#define TIER       0x1C     /* rw */
-#define TWER       0x20     /* rw */
-#define TCLR       0x24     /* rw */
-#define TCRR       0x28     /* rw */
-#define TLDR       0x2C     /* rw */
-#define TTGR       0x30     /* rw */
-#define TWPS       0x34     /* r */
-#define TMAR       0x38     /* rw */
-#define TCAR1      0x3c     /* r */
-#define TSICR      0x40     /* rw */
-#define TCAR2      0x44     /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE              0x48020000
-#define WD2_BASE              0x48022000
-#define WD3_BASE              0x48024000
-#define WD4_BASE              0x48026000
-#define WWPS       0x34     /* r */
-#define WSPR       0x48     /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU    (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE  (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE  (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE  (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE  (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE  (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP   (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE  (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX    (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP  (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL     (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN  (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL   (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL   (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP    (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- *  The 2420's chip selects are programmable.  The mask ROM
- *  does configure CS0 to 0x08000000 before dispatch.  So, if
- *  you want your code to live below that address, you have to
- *  be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A        /* Pre version B */
-# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x04000000  /* debug board */
-# define H4_CS2_BASE           0x0A000000  /* wifi board */
-#else
-# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x04000000  /* debug board */
-# define H4_CS2_BASE           0x0C000000  /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0          0x40000000
-#define SRAM_OFFSET1          0x00200000
-#define SRAM_OFFSET2          0x0000F800
-#define SRAM_VECT_CODE       (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG       (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER    (H4_CS1_BASE+0x1c)
-#endif  /* endif CONFIG_2420H4 */
-
-/* Common */
-#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
-
-#define PERIFERAL_PORT_BASE   0x480FE003
-
-#endif

+ 0 - 82
arch/arm/include/asm/arch-omap24xx/sys_info.h

@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-typedef struct  h4_system_data {
-	/* base board info */
-	u32 base_b_rev;		/* rev from base board i2c */
-	/* cpu board info */
-	u32 cpu_b_rev;		/* rev from cpu board i2c */
-	u32 cpu_b_mux;		/* mux type on daughter board */
-	u32 cpu_b_ddr_type;	/* mem type */
-	u32 cpu_b_ddr_speed;	/* ddr speed rating */
-	u32 cpu_b_switches;	/* boot ctrl switch settings */
-	/* cpu info */
-	u32 cpu_type;		/* type of cpu; 2420, 2422, 2430,...*/
-	u32 cpu_rev;		/* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#define XDR_POP           5      /* package on package part */
-#define SDR_DISCRETE      4      /* 128M memory SDR module*/
-#define DDR_STACKED       3      /* stacked part on 2422 */
-#define DDR_COMBO         2      /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE      1      /* 2x16 parts on daughter card */
-
-#define DDR_100           100    /* type found on most mem d-boards */
-#define DDR_111           111    /* some combo parts */
-#define DDR_133           133    /* most combo, some mem d-boards */
-#define DDR_165           165    /* future parts */
-
-#define CPU_2420          0x2420
-#define CPU_2422          0x2422 /* 2420 + 64M stacked */
-#define CPU_2423          0x2423 /* 2420 + 96M stacked */
-
-#define CPU_2422_ES1      1
-#define CPU_2422_ES2      2
-#define CPU_2420_ES1      1
-#define CPU_2420_ES2      2
-#define CPU_2420_2422_ES1 1
-
-#define CPU_2420_CHIPID   0x0B5D9000
-#define CPU_24XX_ID_MASK  0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP      2
-
-#define GPMC_MUXED        1
-#define GPMC_NONMUXED     0
-
-#define TYPE_NAND         0x800   /* bit pos for nand in gpmc reg */
-#define TYPE_NOR          0x000
-
-#define WIDTH_8BIT        0x0000
-#define WIDTH_16BIT       0x1000  /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72	/* i2c id for companion chip */
-
-#endif

+ 0 - 54
arch/arm/include/asm/arch-omap24xx/sys_proto.h

@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
-  */
-#ifndef _OMAP24XX_SYS_PROTO_H_
-#define _OMAP24XX_SYS_PROTO_H_
-
-void prcm_init(void);
-void memif_init(void);
-void sdrc_init(void);
-void do_sdrc_init(u32,u32);
-void gpmc_init(void);
-
-void ether_init(void);
-void watchdog_init(void);
-void set_muxconf_regs(void);
-void peripheral_enable(void);
-
-u32 get_cpu_type(void);
-u32 get_cpu_rev(void);
-u32 get_mem_type(void);
-u32 get_sysboot_value(void);
-u32 get_gpmc0_base(void);
-u32 is_gpmc_muxed(void);
-u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
-u32 get_board_type(void);
-void display_board_info(u32);
-void update_mux(u32,u32);
-u32 get_sdr_cs_size(u32 offset);
-
-u32 running_in_sdram(void);
-u32 running_in_sram(void);
-u32 running_in_flash(void);
-u32 running_from_internal_boot(void);
-u32 get_device_type(void);
-#endif

+ 0 - 0
arch/arm/include/asm/arch-omap3/clocks.h → arch/arm/include/asm/arch-omap3/clock.h


+ 7 - 0
arch/arm/include/asm/arch-omap3/omap3.h

@@ -253,4 +253,11 @@ struct gpio {
 
 #define OMAP3_EMU_HAL_START_HAL_CRITICAL	4
 
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		30
+#define OMAP_ABB_CLOCK_CYCLES		8
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 26)
+
 #endif

+ 5 - 29
arch/arm/include/asm/arch-omap4/clocks.h → arch/arm/include/asm/arch-omap4/clock.h

@@ -34,25 +34,6 @@
  */
 #define LDELAY		1000000
 
-#define CM_CLKMODE_DPLL_CORE		0x4A004120
-#define CM_CLKMODE_DPLL_PER		0x4A008140
-#define CM_CLKMODE_DPLL_MPU		0x4A004160
-#define CM_CLKSEL_CORE			0x4A004100
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL		0
-#define CM_IDLEST_DPLL		0x4
-#define CM_AUTOIDLE_DPLL	0x8
-#define CM_CLKSEL_DPLL		0xC
-#define CM_DIV_M2_DPLL		0x10
-#define CM_DIV_M3_DPLL		0x14
-#define CM_DIV_M4_DPLL		0x18
-#define CM_DIV_M5_DPLL		0x1C
-#define CM_DIV_M6_DPLL		0x20
-#define CM_DIV_M7_DPLL		0x24
-
-#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
-
 /* CM_DLL_CTRL */
 #define CM_DLL_CTRL_OVERRIDE_SHIFT	0
 #define CM_DLL_CTRL_OVERRIDE_MASK	(1 << 0)
@@ -94,10 +75,8 @@
 #define CM_CLKSEL_DCC_EN_SHIFT			22
 #define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
 
-#define OMAP4_DPLL_MAX_N	127
-
 /* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
 
 /* CM_CLKSEL_CORE */
 #define CLKSEL_CORE_SHIFT	0
@@ -181,9 +160,7 @@
 #define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 25)
 
 /* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ	6
-#define OMAP_32K_CLK_FREQ		32768
 
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
@@ -234,14 +211,13 @@
 
 #define ALTCLKSRC_MODE_ACTIVE		1
 
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
-
 #define DPLL_NO_LOCK	0
 #define DPLL_LOCK	1
 
+/* Clock Defines */
+#define V_OSCK			38400000	/* Clock output from T2 */
+#define V_SCLK                   V_OSCK
+
 struct omap4_scrm_regs {
 	u32 revision;           /* 0x0000 */
 	u32 pad00[63];

+ 0 - 12
arch/arm/include/asm/arch-omap4/cpu.h

@@ -115,18 +115,6 @@ struct watchdog {
 #define WD_UNLOCK1		0xAAAA
 #define WD_UNLOCK2		0x5555
 
-#define SYSCLKDIV_1		(0x1 << 6)
-#define SYSCLKDIV_2		(0x1 << 7)
-
-#define CLKSEL_GPT1		(0x1 << 0)
-
-#define EN_GPT1			(0x1 << 0)
-#define EN_32KSYNC		(0x1 << 2)
-
-#define ST_WDT2			(0x1 << 5)
-
-#define RESETDONE		(0x1 << 0)
-
 #define TCLR_ST			(0x1 << 0)
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)

+ 8 - 14
arch/arm/include/asm/arch-omap4/omap.h

@@ -47,14 +47,6 @@
 #define DRAM_ADDR_SPACE_START	OMAP44XX_DRAM_ADDR_SPACE_START
 #define DRAM_ADDR_SPACE_END	OMAP44XX_DRAM_ADDR_SPACE_END
 
-/* CONTROL */
-#define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
-#define CONTROL_PADCONF_WKUP	(OMAP44XX_L4_CORE_BASE + 0x31E000)
-
-/* LPDDR2 IO regs */
-#define LPDDR2_IO_REGS_BASE	0x4A100638
-
 /* CONTROL_ID_CODE */
 #define CONTROL_ID_CODE		0x4A002204
 
@@ -79,15 +71,9 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
 
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE	(OMAP44XX_L4_WKUP_BASE + 0x4000)
-
 /* GPMC */
 #define OMAP44XX_GPMC_BASE	0x50000000
 
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
-
 /*
  * Hardware Register Details
  */
@@ -144,4 +130,12 @@ struct s32ktimer {
 #define SRAM_SCRATCH_SPACE_ADDR	NON_SECURE_SRAM_START
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4030D000
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 7)
+
 #endif

+ 3 - 2
arch/arm/include/asm/arch-omap4/sys_proto.h

@@ -22,7 +22,7 @@
 #define _SYS_PROTO_H_
 
 #include <asm/arch/omap.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/io.h>
 #include <asm/omap_common.h>
 #include <asm/arch/mux_omap4.h>
@@ -57,7 +57,8 @@ u32 cortex_rev(void);
 void save_omap_boot_params(void);
 void init_omap_revision(void);
 void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);

+ 73 - 18
arch/arm/include/asm/arch-omap5/clocks.h → arch/arm/include/asm/arch-omap5/clock.h

@@ -35,19 +35,6 @@
  */
 #define LDELAY		1000000
 
-#define CM_CLKMODE_DPLL_CORE		(OMAP54XX_L4_CORE_BASE + 0x4120)
-#define CM_CLKMODE_DPLL_PER		(OMAP54XX_L4_CORE_BASE + 0x8140)
-#define CM_CLKMODE_DPLL_MPU		(OMAP54XX_L4_CORE_BASE + 0x4160)
-#define CM_CLKSEL_CORE			(OMAP54XX_L4_CORE_BASE + 0x4100)
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL		0
-#define CM_IDLEST_DPLL		0x4
-#define CM_AUTOIDLE_DPLL	0x8
-#define CM_CLKSEL_DPLL		0xC
-
-#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
-
 /* CM_DLL_CTRL */
 #define CM_DLL_CTRL_OVERRIDE_SHIFT		0
 #define CM_DLL_CTRL_OVERRIDE_MASK		(1 << 0)
@@ -93,10 +80,8 @@
 #define CM_CLKSEL_DCC_EN_SHIFT			22
 #define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
 
-#define OMAP4_DPLL_MAX_N	127
-
 /* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
 
 /* CM_CLKSEL_CORE */
 #define CLKSEL_CORE_SHIFT	0
@@ -113,6 +98,12 @@
 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
 
+/* CM_CLKSEL_ABE_PLL_SYS */
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT	0
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK	1
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1		0
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2		1
+
 /* CM_BYPCLK_DPLL_IVA */
 #define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
 #define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
@@ -195,9 +186,7 @@
 #define RSTTIME1_MASK				(0x3ff << 0)
 
 /* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ	6
-#define OMAP_32K_CLK_FREQ		32768
 
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
@@ -229,9 +218,54 @@
 #define VDD_MPU_ES2_LOW 880
 #define VDD_MM_ES2_LOW 880
 
+/* TPS659038 Voltage settings in mv for OPP_NOMINAL */
+#define VDD_MPU_DRA752		1090
+#define VDD_EVE_DRA752		1060
+#define VDD_GPU_DRA752		1060
+#define VDD_CORE_DRA752		1030
+#define VDD_IVA_DRA752		1060
+
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE	0x4A002000
+#define DRA752_EFUSE_REGBITS	16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM	(DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD	(DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH	(DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM	(DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD	(DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH	(DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM	(DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM	(DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD	(DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH	(DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM	(DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD	(DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH	(DRA752_EFUSE_BASE + 0x1B28)
+
 /* Standard offset is 0.5v expressed in uv */
 #define PALMAS_SMPS_BASE_VOLT_UV 500000
 
+/* TPS659038 */
+#define TPS659038_I2C_SLAVE_ADDR		0x58
+#define TPS659038_REG_ADDR_SMPS12_MPU		0x23
+#define TPS659038_REG_ADDR_SMPS45_EVE		0x2B
+#define TPS659038_REG_ADDR_SMPS6_GPU		0x2F
+#define TPS659038_REG_ADDR_SMPS7_CORE		0x33
+#define TPS659038_REG_ADDR_SMPS8_IVA		0x37
+
 /* TPS */
 #define TPS62361_I2C_SLAVE_ADDR		0x60
 #define TPS62361_REG_ADDR_SET0		0x0
@@ -261,4 +295,25 @@
  * into microsec and passing the value.
  */
 #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC	31219
+
+#ifdef CONFIG_DRA7XX
+#define V_OSCK			20000000	/* Clock output from T2 */
+#else
+#define V_OSCK			19200000	/* Clock output from T2 */
+#endif
+
+#define V_SCLK	V_OSCK
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK		(1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT		1
+#define AUXCLK_SRCSELECT_MASK		(3 << 1)
+#define AUXCLK_CLKDIV_SHIFT		16
+#define AUXCLK_CLKDIV_MASK		(0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK	0
+#define AUXCLK_SRCSELECT_CORE_DPLL	1
+#define AUXCLK_SRCSELECT_PER_DPLL	2
+#define AUXCLK_SRCSELECT_ALTERNATE	3
+
 #endif /* _CLOCKS_OMAP5_H_ */

+ 0 - 12
arch/arm/include/asm/arch-omap5/cpu.h

@@ -119,18 +119,6 @@ struct watchdog {
 #define WD_UNLOCK1		0xAAAA
 #define WD_UNLOCK2		0x5555
 
-#define SYSCLKDIV_1		(0x1 << 6)
-#define SYSCLKDIV_2		(0x1 << 7)
-
-#define CLKSEL_GPT1		(0x1 << 0)
-
-#define EN_GPT1			(0x1 << 0)
-#define EN_32KSYNC		(0x1 << 2)
-
-#define ST_WDT2			(0x1 << 5)
-
-#define RESETDONE		(0x1 << 0)
-
 #define TCLR_ST			(0x1 << 0)
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)

+ 5 - 2
arch/arm/include/asm/arch-omap5/mux_dra7xx.h

@@ -28,11 +28,14 @@
 
 #include <asm/types.h>
 
+#define FSC	(1 << 19)
+#define SSC	(0 << 19)
+
 #define IEN	(1 << 18)
 #define IDIS	(0 << 18)
 
-#define PTU	(3 << 16)
-#define PTD	(1 << 16)
+#define PTU	(1 << 17)
+#define PTD	(0 << 17)
 #define PEN	(1 << 16)
 #define PDIS	(0 << 16)
 

+ 30 - 37
arch/arm/include/asm/arch-omap5/omap.h

@@ -44,16 +44,15 @@
 #define DRAM_ADDR_SPACE_START	OMAP54XX_DRAM_ADDR_SPACE_START
 #define DRAM_ADDR_SPACE_END	OMAP54XX_DRAM_ADDR_SPACE_END
 
-/* CONTROL */
-#define CTRL_BASE		(OMAP54XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE	(CTRL_BASE + 0x0800)
-#define CONTROL_PADCONF_WKUP	(OMAP54XX_L4_WKUP_BASE + 0xc800)
-
-/* LPDDR2 IO regs. To be verified */
-#define LPDDR2_IO_REGS_BASE	0x4A100638
-
-/* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE		(CTRL_BASE + 0x204)
+/* CONTROL ID CODE */
+#define CONTROL_CORE_ID_CODE	0x4A002204
+#define CONTROL_WKUP_ID_CODE	0x4AE0C204
+
+#ifdef CONFIG_DRA7XX
+#define CONTROL_ID_CODE		CONTROL_WKUP_ID_CODE
+#else
+#define CONTROL_ID_CODE		CONTROL_CORE_ID_CODE
+#endif
 
 /* To be verified */
 #define OMAP5430_CONTROL_ID_CODE_ES1_0		0x0B94202F
@@ -62,11 +61,6 @@
 #define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
 #define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
 
-/* STD_FUSE_PROD_ID_1 */
-#define STD_FUSE_PROD_ID_1		(CTRL_BASE + 0x218)
-#define PROD_ID_1_SILICON_TYPE_SHIFT	16
-#define PROD_ID_1_SILICON_TYPE_MASK	(3 << 16)
-
 /* UART */
 #define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
 #define UART2_BASE		(OMAP54XX_L4_PER_BASE + 0x6c000)
@@ -80,15 +74,9 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP54XX_L4_WKUP_BASE + 0x14000)
 
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE	(OMAP54XX_L4_WKUP_BASE + 0x4000)
-
 /* GPMC */
 #define OMAP54XX_GPMC_BASE	0x50000000
 
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
-
 /*
  * Hardware Register Details
  */
@@ -118,9 +106,9 @@
 /* CONTROL_EFUSE_2 */
 #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1		0x00ffc000
 
+#define SDCARD_BIAS_PWRDNZ				(1 << 27)
 #define SDCARD_PWRDNZ					(1 << 26)
 #define SDCARD_BIAS_HIZ_MODE				(1 << 25)
-#define SDCARD_BIAS_PWRDNZ				(1 << 22)
 #define SDCARD_PBIASLITE_VMODE				(1 << 21)
 
 #ifndef __ASSEMBLY__
@@ -181,27 +169,18 @@ struct s32ktimer {
 #define EFUSE_4 0x45145100
 #endif /* __ASSEMBLY__ */
 
-/*
- * Non-secure SRAM Addresses
- * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
- * at 0x40304000(EMU base) so that our code works for both EMU and GP
- */
+#ifdef CONFIG_DRA7XX
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40380000	/* Not inclusive */
+#else
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000	/* Not inclusive */
+#endif
 #define SRAM_SCRATCH_SPACE_ADDR	NON_SECURE_SRAM_START
+
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4031F000
 
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID	0xFFFFFFFF
-#define OMAP4430_ES1_0	0x44300100
-#define OMAP4430_ES2_0	0x44300200
-#define OMAP4430_ES2_1	0x44300210
-#define OMAP4430_ES2_2	0x44300220
-#define OMAP4430_ES2_3	0x44300230
-#define OMAP4460_ES1_0	0x44600100
-#define OMAP4460_ES1_1	0x44600110
-
 /* CONTROL_SRCOMP_XXX_SIDE */
 #define OVERRIDE_XS_SHIFT		30
 #define OVERRIDE_XS_MASK		(1 << 30)
@@ -216,6 +195,19 @@ struct s32ktimer {
 #define SRCODE_OVERRIDE_SEL_XS_SHIFT	0
 #define SRCODE_OVERRIDE_SEL_XS_MASK	(1 << 0)
 
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK		(0x1 << 7)
+
+/* ABB efuse masks */
+#define OMAP5_ABB_FUSE_VSET_MASK		(0x1F << 24)
+#define OMAP5_ABB_FUSE_ENABLE_MASK		(0x1 << 29)
+#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK	(0x1 << 10)
+#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK	(0x1f << 0)
+
 #ifndef __ASSEMBLY__
 struct srcomp_params {
 	s8 divide_factor;
@@ -230,6 +222,7 @@ struct ctrl_ioregs {
 	u32 ctrl_ddrio_1;
 	u32 ctrl_ddrio_2;
 	u32 ctrl_emif_sdram_config_ext;
+	u32 ctrl_ddr_ctrl_ext_0;
 };
 #endif /* __ASSEMBLY__ */
 #endif

+ 4 - 3
arch/arm/include/asm/arch-omap5/sys_proto.h

@@ -23,9 +23,9 @@
 
 #include <asm/arch/omap.h>
 #include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -61,7 +61,8 @@ u32 cortex_rev(void);
 void save_omap_boot_params(void);
 void init_omap_revision(void);
 void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);

+ 39 - 0
arch/arm/include/asm/arch-vf610/clock.h

@@ -0,0 +1,39 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+#include <common.h>
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_BUS_CLK,
+	MXC_IPG_CLK,
+	MXC_UART_CLK,
+	MXC_ESDHC_CLK,
+	MXC_FEC_CLK,
+};
+
+void enable_ocotp_clk(unsigned char enable);
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
+
+#endif /* __ASM_ARCH_CLOCK_H */

+ 225 - 0
arch/arm/include/asm/arch-vf610/crm_regs.h

@@ -0,0 +1,225 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ARCH_ARM_MACH_VF610_CCM_REGS_H__
+#define __ARCH_ARM_MACH_VF610_CCM_REGS_H__
+
+#ifndef __ASSEMBLY__
+
+/* Clock Controller Module (CCM) */
+struct ccm_reg {
+	u32 ccr;
+	u32 csr;
+	u32 ccsr;
+	u32 cacrr;
+	u32 cscmr1;
+	u32 cscdr1;
+	u32 cscdr2;
+	u32 cscdr3;
+	u32 cscmr2;
+	u32 cscdr4;
+	u32 ctor;
+	u32 clpcr;
+	u32 cisr;
+	u32 cimr;
+	u32 ccosr;
+	u32 cgpr;
+	u32 ccgr0;
+	u32 ccgr1;
+	u32 ccgr2;
+	u32 ccgr3;
+	u32 ccgr4;
+	u32 ccgr5;
+	u32 ccgr6;
+	u32 ccgr7;
+	u32 ccgr8;
+	u32 ccgr9;
+	u32 ccgr10;
+	u32 ccgr11;
+	u32 cmeor0;
+	u32 cmeor1;
+	u32 cmeor2;
+	u32 cmeor3;
+	u32 cmeor4;
+	u32 cmeor5;
+	u32 cppdsr;
+	u32 ccowr;
+	u32 ccpgr0;
+	u32 ccpgr1;
+	u32 ccpgr2;
+	u32 ccpgr3;
+};
+
+/* Analog components control digital interface (ANADIG) */
+struct anadig_reg {
+	u32 pll3_ctrl;
+	u32 resv0[3];
+	u32 pll7_ctrl;
+	u32 resv1[3];
+	u32 pll2_ctrl;
+	u32 resv2[3];
+	u32 pll2_ss;
+	u32 resv3[3];
+	u32 pll2_num;
+	u32 resv4[3];
+	u32 pll2_denom;
+	u32 resv5[3];
+	u32 pll4_ctrl;
+	u32 resv6[3];
+	u32 pll4_num;
+	u32 resv7[3];
+	u32 pll4_denom;
+	u32 pll6_ctrl;
+	u32 resv8[3];
+	u32 pll6_num;
+	u32 resv9[3];
+	u32 pll6_denom;
+	u32 resv10[3];
+	u32 pll5_ctrl;
+	u32 resv11[3];
+	u32 pll3_pfd;
+	u32 resv12[3];
+	u32 pll2_pfd;
+	u32 resv13[3];
+	u32 reg_1p1;
+	u32 resv14[3];
+	u32 reg_3p0;
+	u32 resv15[3];
+	u32 reg_2p5;
+	u32 resv16[7];
+	u32 ana_misc0;
+	u32 resv17[3];
+	u32 ana_misc1;
+	u32 resv18[63];
+	u32 anadig_digprog;
+	u32 resv19[3];
+	u32 pll1_ctrl;
+	u32 resv20[3];
+	u32 pll1_ss;
+	u32 resv21[3];
+	u32 pll1_num;
+	u32 resv22[3];
+	u32 pll1_denom;
+	u32 resv23[3];
+	u32 pll1_pdf;
+	u32 resv24[3];
+	u32 pll_lock;
+};
+#endif
+
+#define CCM_CCR_FIRC_EN				(1 << 16)
+#define CCM_CCR_OSCNT_MASK			0xff
+#define CCM_CCR_OSCNT(v)			((v) & 0xff)
+
+#define CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET	19
+#define CCM_CCSR_PLL2_PFD_CLK_SEL_MASK		(0x7 << 19)
+#define CCM_CCSR_PLL2_PFD_CLK_SEL(v)		(((v) & 0x7) << 19)
+
+#define CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET	16
+#define CCM_CCSR_PLL1_PFD_CLK_SEL_MASK		(0x7 << 16)
+#define CCM_CCSR_PLL1_PFD_CLK_SEL(v)		(((v) & 0x7) << 16)
+
+#define CCM_CCSR_PLL2_PFD4_EN			(1 << 15)
+#define CCM_CCSR_PLL2_PFD3_EN			(1 << 14)
+#define CCM_CCSR_PLL2_PFD2_EN			(1 << 13)
+#define CCM_CCSR_PLL2_PFD1_EN			(1 << 12)
+#define CCM_CCSR_PLL1_PFD4_EN			(1 << 11)
+#define CCM_CCSR_PLL1_PFD3_EN			(1 << 10)
+#define CCM_CCSR_PLL1_PFD2_EN			(1 << 9)
+#define CCM_CCSR_PLL1_PFD1_EN			(1 << 8)
+
+#define CCM_CCSR_DDRC_CLK_SEL(v)		((v) << 6)
+#define CCM_CCSR_FAST_CLK_SEL(v)		((v) << 5)
+
+#define CCM_CCSR_SYS_CLK_SEL_OFFSET		0
+#define CCM_CCSR_SYS_CLK_SEL_MASK		0x7
+#define CCM_CCSR_SYS_CLK_SEL(v)			((v) & 0x7)
+
+#define CCM_CACRR_IPG_CLK_DIV_OFFSET		11
+#define CCM_CACRR_IPG_CLK_DIV_MASK		(0x3 << 11)
+#define CCM_CACRR_IPG_CLK_DIV(v)		(((v) & 0x3) << 11)
+#define CCM_CACRR_BUS_CLK_DIV_OFFSET		3
+#define CCM_CACRR_BUS_CLK_DIV_MASK		(0x7 << 3)
+#define CCM_CACRR_BUS_CLK_DIV(v)		(((v) & 0x7) << 3)
+#define CCM_CACRR_ARM_CLK_DIV_OFFSET		0
+#define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
+#define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
+
+#define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET	18
+#define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK		(0x3 << 18)
+#define CCM_CSCMR1_ESDHC1_CLK_SEL(v)		(((v) & 0x3) << 18)
+
+#define CCM_CSCDR1_RMII_CLK_EN			(1 << 24)
+
+#define CCM_CSCDR2_ESDHC1_EN			(1 << 29)
+#define CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET	20
+#define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
+#define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
+
+#define CCM_CSCMR2_RMII_CLK_SEL_OFFSET		4
+#define CCM_CSCMR2_RMII_CLK_SEL_MASK		(0x3 << 4)
+#define CCM_CSCMR2_RMII_CLK_SEL(v)		(((v) & 0x3) << 4)
+
+#define CCM_REG_CTRL_MASK			0xffffffff
+#define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
+#define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR2_PORTA_CTRL_MASK		(0x3 << 18)
+#define CCM_CCGR2_PORTB_CTRL_MASK		(0x3 << 20)
+#define CCM_CCGR2_PORTC_CTRL_MASK		(0x3 << 22)
+#define CCM_CCGR2_PORTD_CTRL_MASK		(0x3 << 24)
+#define CCM_CCGR2_PORTE_CTRL_MASK		(0x3 << 26)
+#define CCM_CCGR3_ANADIG_CTRL_MASK		0x3
+#define CCM_CCGR4_WKUP_CTRL_MASK		(0x3 << 20)
+#define CCM_CCGR4_CCM_CTRL_MASK			(0x3 << 22)
+#define CCM_CCGR4_GPC_CTRL_MASK			(0x3 << 24)
+#define CCM_CCGR6_OCOTP_CTRL_MASK		(0x3 << 10)
+#define CCM_CCGR6_DDRMC_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR7_SDHC1_CTRL_MASK		(0x3 << 4)
+#define CCM_CCGR9_FEC0_CTRL_MASK		0x3
+#define CCM_CCGR9_FEC1_CTRL_MASK		(0x3 << 2)
+
+#define ANADIG_PLL2_CTRL_ENABLE			(1 << 13)
+#define ANADIG_PLL2_CTRL_POWERDOWN		(1 << 12)
+#define ANADIG_PLL2_CTRL_DIV_SELECT		1
+#define ANADIG_PLL1_CTRL_ENABLE			(1 << 13)
+#define ANADIG_PLL1_CTRL_POWERDOWN		(1 << 12)
+#define ANADIG_PLL1_CTRL_DIV_SELECT		1
+
+#define FASE_CLK_FREQ		24000000
+#define SLOW_CLK_FREQ		32000
+#define PLL1_PFD1_FREQ		500000000
+#define PLL1_PFD2_FREQ		452000000
+#define PLL1_PFD3_FREQ		396000000
+#define PLL1_PFD4_FREQ		528000000
+#define PLL1_MAIN_FREQ		528000000
+#define PLL2_PFD1_FREQ		500000000
+#define PLL2_PFD2_FREQ		396000000
+#define PLL2_PFD3_FREQ		339000000
+#define PLL2_PFD4_FREQ		413000000
+#define PLL2_MAIN_FREQ		528000000
+#define PLL3_MAIN_FREQ		480000000
+#define PLL3_PFD3_FREQ		298000000
+#define PLL5_MAIN_FREQ		500000000
+
+#define ENET_EXTERNAL_CLK	50000000
+#define AUDIO_EXTERNAL_CLK	24576000
+
+#endif /*__ARCH_ARM_MACH_VF610_CCM_REGS_H__ */

+ 419 - 0
arch/arm/include/asm/arch-vf610/imx-regs.h

@@ -0,0 +1,419 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define ARCH_MXC
+
+#define IRAM_BASE_ADDR		0x3F000000	/* internal ram */
+#define IRAM_SIZE		0x00080000	/* 512 KB */
+
+#define AIPS0_BASE_ADDR		0x40000000
+#define AIPS1_BASE_ADDR		0x40080000
+
+/* AIPS 0 */
+#define MSCM_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00001000)
+#define MSCM_IR_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00001800)
+#define CA5SCU_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00002000)
+#define CA5_INTD_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00003000)
+#define CA5_L2C_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00006000)
+#define NIC0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00008000)
+#define NIC1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00009000)
+#define NIC2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000A000)
+#define NIC3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000B000)
+#define NIC4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000C000)
+#define NIC5_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000D000)
+#define NIC6_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000E000)
+#define NIC7_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0000F000)
+#define AHBTZASC_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00010000)
+#define TZASC_SYS0_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00011000)
+#define TZASC_SYS1_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00012000)
+#define TZASC_GFX_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00013000)
+#define TZASC_DDR0_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00014000)
+#define TZASC_DDR1_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00015000)
+#define CSU_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00017000)
+#define DMA0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00018000)
+#define DMA0_TCD_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00019000)
+#define SEMA4_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0001D000)
+#define FB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0001E000)
+#define DMA_MUX0_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00024000)
+#define UART0_BASE		(AIPS0_BASE_ADDR + 0x00027000)
+#define UART1_BASE		(AIPS0_BASE_ADDR + 0x00028000)
+#define UART2_BASE		(AIPS0_BASE_ADDR + 0x00029000)
+#define UART3_BASE		(AIPS0_BASE_ADDR + 0x0002A000)
+#define SPI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0002C000)
+#define SPI1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0002D000)
+#define SAI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0002F000)
+#define SAI1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00030000)
+#define SAI2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00031000)
+#define SAI3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00032000)
+#define CRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00033000)
+#define PDB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00036000)
+#define PIT_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00037000)
+#define FTM0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00038000)
+#define FTM1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00039000)
+#define ADC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0003B000)
+#define TCON0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0003D000)
+#define WDOG1_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0003E000)
+#define LPTMR_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00040000)
+#define RLE_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00042000)
+#define MLB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00043000)
+#define QSPI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00044000)
+#define IOMUXC_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00048000)
+#define ANADIG_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00050000)
+#define SCSCM_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00052000)
+#define ASRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00060000)
+#define SPDIF_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00061000)
+#define ESAI_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00062000)
+#define ESAI_FIFO_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00063000)
+#define WDOG_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00065000)
+#define I2C0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00066000)
+#define WKUP_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006A000)
+#define CCM_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006B000)
+#define GPC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006C000)
+#define VREG_DIG_BASE_ADDR	(AIPS0_BASE_ADDR + 0x0006D000)
+#define SRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006E000)
+#define CMU_BASE_ADDR		(AIPS0_BASE_ADDR + 0x0006F000)
+
+/* AIPS 1 */
+#define OCOTP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00025000)
+#define DDR_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0002E000)
+#define ESDHC0_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00031000)
+#define ESDHC1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00032000)
+#define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
+
+/* MUX mode and PAD ctrl are in one register */
+#define CONFIG_IOMUX_SHARE_CONF_REG
+
+#define FEC_QUIRK_ENET_MAC
+
+/* MSCM interrupt rounter */
+#define MSCM_IRSPRC_CP0_EN				1
+#define MSCM_IRSPRC_NUM					112
+
+/* DDRMC */
+#define DDRMC_PHY_DQ_TIMING				0x00002613
+#define DDRMC_PHY_DQS_TIMING				0x00002615
+#define DDRMC_PHY_CTRL					0x01210080
+#define DDRMC_PHY_MASTER_CTRL				0x0001012a
+#define DDRMC_PHY_SLAVE_CTRL				0x00012020
+
+#define DDRMC_PHY50_DDR3_MODE				(1 << 12)
+#define DDRMC_PHY50_EN_SW_HALF_CYCLE			(1 << 8)
+
+#define DDRMC_CR00_DRAM_CLASS_DDR3			(0x6 << 8)
+#define DDRMC_CR00_DRAM_CLASS_LPDDR2			(0x5 << 8)
+#define DDRMC_CR00_START				1
+#define DDRMC_CR02_DRAM_TINIT(v)			((v) & 0xffffff)
+#define DDRMC_CR10_TRST_PWRON(v)			(v)
+#define DDRMC_CR11_CKE_INACTIVE(v)			(v)
+#define DDRMC_CR12_WRLAT(v)				(((v) & 0x1f) << 8)
+#define DDRMC_CR12_CASLAT_LIN(v)			((v) & 0x3f)
+#define DDRMC_CR13_TRC(v)				(((v) & 0xff) << 24)
+#define DDRMC_CR13_TRRD(v)				(((v) & 0xff) << 16)
+#define DDRMC_CR13_TCCD(v)				(((v) & 0x1f) << 8)
+#define DDRMC_CR13_TBST_INT_INTERVAL(v)			((v) & 0x7)
+#define DDRMC_CR14_TFAW(v)				(((v) & 0x3f) << 24)
+#define DDRMC_CR14_TRP(v)				(((v) & 0x1f) << 16)
+#define DDRMC_CR14_TWTR(v)				(((v) & 0xf) << 8)
+#define DDRMC_CR14_TRAS_MIN(v)				((v) & 0xff)
+#define DDRMC_CR16_TMRD(v)				(((v) & 0x1f) << 24)
+#define DDRMC_CR16_TRTP(v)				(((v) & 0xf) << 16)
+#define DDRMC_CR17_TRAS_MAX(v)				(((v) & 0x1ffff) << 8)
+#define DDRMC_CR17_TMOD(v)				((v) & 0xff)
+#define DDRMC_CR18_TCKESR(v)				(((v) & 0x1f) << 8)
+#define DDRMC_CR18_TCKE(v)				((v) & 0x7)
+#define DDRMC_CR20_AP_EN				(1 << 24)
+#define DDRMC_CR21_TRCD_INT(v)				(((v) & 0xff) << 16)
+#define DDRMC_CR21_TRAS_LOCKOUT				(1 << 8)
+#define DDRMC_CR21_CCMAP_EN				1
+#define DDRMC_CR22_TDAL(v)				(((v) & 0x3f) << 16)
+#define DDRMC_CR23_BSTLEN(v)				(((v) & 0x7) << 24)
+#define DDRMC_CR23_TDLL(v)				((v) & 0xff)
+#define DDRMC_CR24_TRP_AB(v)				((v) & 0x1f)
+#define DDRMC_CR25_TREF_EN				(1 << 16)
+#define DDRMC_CR26_TREF(v)				(((v) & 0xffff) << 16)
+#define DDRMC_CR26_TRFC(v)				((v) & 0x3ff)
+#define DDRMC_CR28_TREF_INT(v)				((v) & 0xffff)
+#define DDRMC_CR29_TPDEX(v)				((v) & 0xffff)
+#define DDRMC_CR30_TXPDLL(v)				((v) & 0xffff)
+#define DDRMC_CR31_TXSNR(v)				(((v) & 0xffff) << 16)
+#define DDRMC_CR31_TXSR(v)				((v) & 0xffff)
+#define DDRMC_CR33_EN_QK_SREF				(1 << 16)
+#define DDRMC_CR34_CKSRX(v)				(((v) & 0xf) << 16)
+#define DDRMC_CR34_CKSRE(v)				(((v) & 0xf) << 8)
+#define DDRMC_CR38_FREQ_CHG_EN				(1 << 8)
+#define DDRMC_CR39_PHY_INI_COM(v)			(((v) & 0xffff) << 16)
+#define DDRMC_CR39_PHY_INI_STA(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR39_FRQ_CH_DLLOFF(v)			((v) & 0x3)
+#define DDRMC_CR41_PHY_INI_STRT_INI_DIS			1
+#define DDRMC_CR48_MR1_DA_0(v)				(((v) & 0xffff) << 16)
+#define DDRMC_CR48_MR0_DA_0(v)				((v) & 0xffff)
+#define DDRMC_CR66_ZQCL(v)				(((v) & 0xfff) << 16)
+#define DDRMC_CR66_ZQINIT(v)				((v) & 0xfff)
+#define DDRMC_CR67_ZQCS(v)				((v) & 0xfff)
+#define DDRMC_CR69_ZQ_ON_SREF_EX(v)			(((v) & 0xf) << 8)
+#define DDRMC_CR70_REF_PER_ZQ(v)			(v)
+#define DDRMC_CR72_ZQCS_ROTATE				(1 << 24)
+#define DDRMC_CR73_APREBIT(v)				(((v) & 0xf) << 24)
+#define DDRMC_CR73_COL_DIFF(v)				(((v) & 0x7) << 16)
+#define DDRMC_CR73_ROW_DIFF(v)				(((v) & 0x3) << 8)
+#define DDRMC_CR74_BANKSPLT_EN				(1 << 24)
+#define DDRMC_CR74_ADDR_CMP_EN				(1 << 16)
+#define DDRMC_CR74_CMD_AGE_CNT(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR74_AGE_CNT(v)				((v) & 0xff)
+#define DDRMC_CR75_RW_PG_EN				(1 << 24)
+#define DDRMC_CR75_RW_EN				(1 << 16)
+#define DDRMC_CR75_PRI_EN				(1 << 8)
+#define DDRMC_CR75_PLEN					1
+#define DDRMC_CR76_NQENT_ACTDIS(v)			(((v) & 0x7) << 24)
+#define DDRMC_CR76_D_RW_G_BKCN(v)			(((v) & 0x3) << 16)
+#define DDRMC_CR76_W2R_SPLT_EN				(1 << 8)
+#define DDRMC_CR76_CS_EN				1
+#define DDRMC_CR77_CS_MAP				(1 << 24)
+#define DDRMC_CR77_DI_RD_INTLEAVE			(1 << 8)
+#define DDRMC_CR77_SWAP_EN				1
+#define DDRMC_CR78_BUR_ON_FLY_BIT(v)			((v) & 0xf)
+#define DDRMC_CR79_CTLUPD_AREF				(1 << 24)
+#define DDRMC_CR82_INT_MASK				0x1fffffff
+#define DDRMC_CR87_ODT_WR_MAPCS0			(1 << 24)
+#define DDRMC_CR87_ODT_RD_MAPCS0			(1 << 16)
+#define DDRMC_CR88_TODTL_CMD(v)				(((v) & 0x1f) << 16)
+#define DDRMC_CR89_AODT_RWSMCS(v)			((v) & 0xf)
+#define DDRMC_CR91_R2W_SMCSDL(v)			(((v) & 0x7) << 16)
+#define DDRMC_CR96_WLMRD(v)				(((v) & 0x3f) << 8)
+#define DDRMC_CR96_WLDQSEN(v)				((v) & 0x3f)
+#define DDRMC_CR105_RDLVL_DL_0(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR110_RDLVL_DL_1(v)			((v) & 0xff)
+#define DDRMC_CR114_RDLVL_GTDL_2(v)			(((v) & 0xffff) << 8)
+#define DDRMC_CR117_AXI0_W_PRI(v)			(((v) & 0x3) << 8)
+#define DDRMC_CR117_AXI0_R_PRI(v)			((v) & 0x3)
+#define DDRMC_CR118_AXI1_W_PRI(v)			(((v) & 0x3) << 24)
+#define DDRMC_CR118_AXI1_R_PRI(v)			(((v) & 0x3) << 16)
+#define DDRMC_CR120_AXI0_PRI1_RPRI(v)			(((v) & 0xf) << 24)
+#define DDRMC_CR120_AXI0_PRI0_RPRI(v)			(((v) & 0xf) << 16)
+#define DDRMC_CR121_AXI0_PRI3_RPRI(v)			(((v) & 0xf) << 8)
+#define DDRMC_CR121_AXI0_PRI2_RPRI(v)			((v) & 0xf)
+#define DDRMC_CR122_AXI1_PRI1_RPRI(v)			(((v) & 0xf) << 24)
+#define DDRMC_CR122_AXI1_PRI0_RPRI(v)			(((v) & 0xf) << 16)
+#define DDRMC_CR122_AXI0_PRIRLX(v)			((v) & 0x3ff)
+#define DDRMC_CR123_AXI1_PRI3_RPRI(v)			(((v) & 0xf) << 8)
+#define DDRMC_CR123_AXI1_PRI2_RPRI(v)			((v) & 0xf)
+#define DDRMC_CR124_AXI1_PRIRLX(v)			((v) & 0x3ff)
+#define DDRMC_CR126_PHY_RDLAT(v)			(((v) & 0x3f) << 8)
+#define DDRMC_CR132_WRLAT_ADJ(v)			(((v) & 0x1f) << 8)
+#define DDRMC_CR132_RDLAT_ADJ(v)			((v) & 0x3f)
+#define DDRMC_CR139_PHY_WRLV_RESPLAT(v)			(((v) & 0xff) << 24)
+#define DDRMC_CR139_PHY_WRLV_LOAD(v)			(((v) & 0xff) << 16)
+#define DDRMC_CR139_PHY_WRLV_DLL(v)			(((v) & 0xff) << 8)
+#define DDRMC_CR139_PHY_WRLV_EN(v)			((v) & 0xff)
+#define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v)	(((v) & 0x1f) << 27)
+#define DDRMC_CR154_PAD_ZQ_MODE(v)			(((v) & 0x3) << 21)
+#define DDRMC_CR155_AXI0_AWCACHE			(1 << 10)
+#define DDRMC_CR155_PAD_ODT_BYTE1(v)			((v) & 0x7)
+#define DDRMC_CR158_TWR(v)				((v) & 0x3f)
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32 scr;
+	u32 sbmr1;
+	u32 srsr;
+	u32 secr;
+	u32 gpsr;
+	u32 sicr;
+	u32 simr;
+	u32 sbmr2;
+	u32 gpr0;
+	u32 gpr1;
+	u32 gpr2;
+	u32 gpr3;
+	u32 gpr4;
+	u32 hab0;
+	u32 hab1;
+	u32 hab2;
+	u32 hab3;
+	u32 hab4;
+	u32 hab5;
+	u32 misc0;
+	u32 misc1;
+	u32 misc2;
+	u32 misc3;
+};
+
+/* Periodic Interrupt Timer (PIT) */
+struct pit_reg {
+	u32 mcr;
+	u32 recv0[55];
+	u32 ltmr64h;
+	u32 ltmr64l;
+	u32 recv1[6];
+	u32 ldval0;
+	u32 cval0;
+	u32 tctrl0;
+	u32 tflg0;
+	u32 ldval1;
+	u32 cval1;
+	u32 tctrl1;
+	u32 tflg1;
+	u32 ldval2;
+	u32 cval2;
+	u32 tctrl2;
+	u32 tflg2;
+	u32 ldval3;
+	u32 cval3;
+	u32 tctrl3;
+	u32 tflg3;
+	u32 ldval4;
+	u32 cval4;
+	u32 tctrl4;
+	u32 tflg4;
+	u32 ldval5;
+	u32 cval5;
+	u32 tctrl5;
+	u32 tflg5;
+	u32 ldval6;
+	u32 cval6;
+	u32 tctrl6;
+	u32 tflg6;
+	u32 ldval7;
+	u32 cval7;
+	u32 tctrl7;
+	u32 tflg7;
+};
+
+/* Watchdog Timer (WDOG) */
+struct wdog_regs {
+	u16 wcr;
+	u16 wsr;
+	u16 wrsr;
+	u16 wicr;
+	u16 wmcr;
+};
+
+/* LPDDR2/DDR3 SDRAM Memory Controller (DDRMC) */
+struct ddrmr_regs {
+	u32 cr[162];
+	u32 rsvd[94];
+	u32 phy[53];
+};
+
+/* On-Chip One Time Programmable Controller (OCOTP) */
+struct ocotp_regs {
+	u32 ctrl;
+	u32 ctrl_set;
+	u32 ctrl_clr;
+	u32 ctrl_tog;
+	u32 timing;
+	u32 rsvd0[3];
+	u32 data;
+	u32 rsvd1[3];
+	u32 read_ctrl;
+	u32 rsvd2[3];
+	u32 read_fuse_data;
+	u32 rsvd3[7];
+	u32 scs;
+	u32 scs_set;
+	u32 scs_clr;
+	u32 scs_tog;
+	u32 crc_addr;
+	u32 rsvd4[3];
+	u32 crc_value;
+	u32 rsvd5[3];
+	u32 version;
+	u32 rsvd6[0xdb];
+
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+	} bank[16];
+};
+
+struct fuse_bank0_regs {
+	u32 lock;
+	u32 rsvd0[3];
+	u32 uid_low;
+	u32 rsvd1[3];
+	u32 uid_high;
+	u32 rsvd2[0x17];
+};
+
+struct fuse_bank4_regs {
+	u32 sjc_resp0;
+	u32 rsvd0[3];
+	u32 sjc_resp1;
+	u32 rsvd1[3];
+	u32 mac_addr0;
+	u32 rsvd2[3];
+	u32 mac_addr1;
+	u32 rsvd3[3];
+	u32 mac_addr2;
+	u32 rsvd4[3];
+	u32 mac_addr3;
+	u32 rsvd5[3];
+	u32 gp1;
+	u32 rsvd6[3];
+	u32 gp2;
+	u32 rsvd7[3];
+};
+
+/* UART */
+struct lpuart_fsl {
+	u8 ubdh;
+	u8 ubdl;
+	u8 uc1;
+	u8 uc2;
+	u8 us1;
+	u8 us2;
+	u8 uc3;
+	u8 ud;
+	u8 uma1;
+	u8 uma2;
+	u8 uc4;
+	u8 uc5;
+	u8 ued;
+	u8 umodem;
+	u8 uir;
+	u8 reserved;
+	u8 upfifo;
+	u8 ucfifo;
+	u8 usfifo;
+	u8 utwfifo;
+	u8 utcfifo;
+	u8 urwfifo;
+	u8 urcfifo;
+	u8 rsvd[28];
+};
+
+/* MSCM Interrupt Router */
+struct mscm_ir {
+	u32 ircp0ir;
+	u32 ircp1ir;
+	u32 rsvd1[6];
+	u32 ircpgir;
+	u32 rsvd2[23];
+	u16 irsprc[112];
+	u16 rsvd3[848];
+};
+
+#endif	/* __ASSEMBLER__*/
+
+#endif	/* __ASM_ARCH_IMX_REGS_H__ */

+ 101 - 0
arch/arm/include/asm/arch-vf610/iomux-vf610.h

@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IOMUX_VF610_H__
+#define __IOMUX_VF610_H__
+
+#include <asm/imx-common/iomux-v3.h>
+
+/* Pad control groupings */
+#define VF610_UART_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_25ohm | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_SDHC_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_20ohm | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
+				PAD_CTL_OBE_IBE_ENABLE)
+#define VF610_DDR_PAD_CTRL	PAD_CTL_DSE_25ohm
+
+enum {
+	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTB4__UART1_TX		= IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTB5__UART1_RX		= IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL),
+	VF610_PAD_PTC1__RMII0_MDIO		= IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC0__RMII0_MDC		= IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC2__RMII0_CRS_DV		= IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC3__RMII0_RD1		= IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC4__RMII0_RD0		= IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC5__RMII0_RXER		= IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC6__RMII0_TD1		= IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC7__RMII0_TD0		= IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTC8__RMII0_TXEN		= IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
+	VF610_PAD_PTA24__ESDHC1_CLK		= IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA25__ESDHC1_CMD		= IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA26__ESDHC1_DAT0		= IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA27__ESDHC1_DAT1		= IOMUX_PAD(0x0044, 0x0044, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA28__ESDHC1_DAT2		= IOMUX_PAD(0x0048, 0x0048, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_PTA29__ESDHC1_DAT3		= IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
+	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A13__DDR_A_13		= IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A12__DDR_A_12		= IOMUX_PAD(0x022c, 0x022c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A11__DDR_A_11		= IOMUX_PAD(0x0230, 0x0230, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A10__DDR_A_10		= IOMUX_PAD(0x0234, 0x0234, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A9__DDR_A_9		= IOMUX_PAD(0x0238, 0x0238, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A8__DDR_A_8		= IOMUX_PAD(0x023c, 0x023c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A7__DDR_A_7		= IOMUX_PAD(0x0240, 0x0240, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A6__DDR_A_6		= IOMUX_PAD(0x0244, 0x0244, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A5__DDR_A_5		= IOMUX_PAD(0x0248, 0x0248, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A4__DDR_A_4		= IOMUX_PAD(0x024c, 0x024c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A3__DDR_A_3		= IOMUX_PAD(0x0250, 0x0250, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A2__DDR_A_2		= IOMUX_PAD(0x0254, 0x0254, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_A1__DDR_A_1		= IOMUX_PAD(0x0258, 0x0258, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_BA2__DDR_BA_2		= IOMUX_PAD(0x0260, 0x0260, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_BA1__DDR_BA_1		= IOMUX_PAD(0x0264, 0x0264, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_BA0__DDR_BA_0		= IOMUX_PAD(0x0268, 0x0268, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CAS__DDR_CAS_B		= IOMUX_PAD(0x026c, 0x026c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CKE__DDR_CKE_0		= IOMUX_PAD(0x0270, 0x0270, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CLK__DDR_CLK_0		= IOMUX_PAD(0x0274, 0x0274, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_CS__DDR_CS_B_0		= IOMUX_PAD(0x0278, 0x0278, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D15__DDR_D_15		= IOMUX_PAD(0x027c, 0x027c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D14__DDR_D_14		= IOMUX_PAD(0x0280, 0x0280, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D13__DDR_D_13		= IOMUX_PAD(0x0284, 0x0284, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D12__DDR_D_12		= IOMUX_PAD(0x0288, 0x0288, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D11__DDR_D_11		= IOMUX_PAD(0x028c, 0x028c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D10__DDR_D_10		= IOMUX_PAD(0x0290, 0x0290, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D9__DDR_D_9		= IOMUX_PAD(0x0294, 0x0294, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D8__DDR_D_8		= IOMUX_PAD(0x0298, 0x0298, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D7__DDR_D_7		= IOMUX_PAD(0x029c, 0x029c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D6__DDR_D_6		= IOMUX_PAD(0x02a0, 0x02a0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D5__DDR_D_5		= IOMUX_PAD(0x02a4, 0x02a4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D4__DDR_D_4		= IOMUX_PAD(0x02a8, 0x02a8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D3__DDR_D_3		= IOMUX_PAD(0x02ac, 0x02ac, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D2__DDR_D_2		= IOMUX_PAD(0x02b0, 0x02b0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D1__DDR_D_1		= IOMUX_PAD(0x02b4, 0x02b4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_D0__DDR_D_0		= IOMUX_PAD(0x02b8, 0x02b8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_DQM1__DDR_DQM_1		= IOMUX_PAD(0x02bc, 0x02bc, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_DQM0__DDR_DQM_0		= IOMUX_PAD(0x02c0, 0x02c0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_DQS1__DDR_DQS_1		= IOMUX_PAD(0x02c4, 0x02c4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_DQS0__DDR_DQS_0		= IOMUX_PAD(0x02c8, 0x02c8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_RAS__DDR_RAS_B		= IOMUX_PAD(0x02cc, 0x02cc, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_WE__DDR_WE_B		= IOMUX_PAD(0x02d0, 0x02d0, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_ODT1__DDR_ODT_0		= IOMUX_PAD(0x02d4, 0x02d4, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+	VF610_PAD_DDR_ODT0__DDR_ODT_1		= IOMUX_PAD(0x02d8, 0x02d8, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
+};
+
+#endif	/* __IOMUX_VF610_H__ */

+ 5 - 7
arch/arm/include/asm/emif.h

@@ -581,7 +581,7 @@
 	(0xFF << EMIF_SYS_ADDR_SHIFT))
 
 #define EMIF_EXT_PHY_CTRL_TIMING_REG	0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG	0x13
+#define EMIF_EXT_PHY_CTRL_CONST_REG	0x14
 
 /* Reg mapping structure */
 struct emif_reg_struct {
@@ -855,13 +855,10 @@ struct dmm_lisa_map_regs {
 #define DPD_ENABLE	1
 
 /* Maximum delay before Low Power Modes */
-#ifndef CONFIG_OMAP54XX
-#define REG_CS_TIM		0xF
-#else
 #define REG_CS_TIM		0x0
-#endif
-#define REG_SR_TIM		0xF
-#define REG_PD_TIM		0xF
+#define REG_SR_TIM		0x0
+#define REG_PD_TIM		0x0
+
 
 /* EMIF_PWR_MGMT_CTRL register */
 #define EMIF_PWR_MGMT_CTRL (\
@@ -1113,6 +1110,7 @@ struct emif_regs {
 	u32 freq;
 	u32 sdram_config_init;
 	u32 sdram_config;
+	u32 sdram_config2;
 	u32 ref_ctrl;
 	u32 sdram_tim1;
 	u32 sdram_tim2;

+ 18 - 0
arch/arm/include/asm/imx-common/iomux-v3.h

@@ -121,6 +121,24 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_DSE_40ohm	(6 << 3)
 #define PAD_CTL_DSE_34ohm	(7 << 3)
 
+#elif defined(CONFIG_VF610)
+
+#define PAD_MUX_MODE_SHIFT	20
+
+#define PAD_CTL_SPEED_MED	(1 << 12)
+#define PAD_CTL_SPEED_HIGH	(3 << 12)
+
+#define PAD_CTL_DSE_50ohm	(3 << 6)
+#define PAD_CTL_DSE_25ohm	(6 << 6)
+#define PAD_CTL_DSE_20ohm	(7 << 6)
+
+#define PAD_CTL_PUS_47K_UP	(1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP	(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PKE		(1 << 3)
+#define PAD_CTL_PUE		(1 << 2 | PAD_CTL_PKE)
+
+#define PAD_CTL_OBE_IBE_ENABLE	(3 << 0)
+
 #else
 
 #define PAD_CTL_DVS		(1 << 13)

+ 55 - 4
arch/arm/include/asm/omap_common.h

@@ -29,7 +29,7 @@
 
 #include <common.h>
 
-#define NUM_SYS_CLKS	8
+#define NUM_SYS_CLKS	7
 
 struct prcm_regs {
 	/* cm1.ckgen */
@@ -242,6 +242,8 @@ struct prcm_regs {
 	u32 cm_l3init_fsusb_clkctrl;
 	u32 cm_l3init_ocp2scp1_clkctrl;
 
+	u32 prm_irqstatus_mpu_2;
+
 	/* cm2.l4per */
 	u32 cm_l4per_clkstctrl;
 	u32 cm_l4per_dynamicdep;
@@ -301,6 +303,7 @@ struct prcm_regs {
 	/* l4 wkup regs */
 	u32 cm_abe_pll_ref_clksel;
 	u32 cm_sys_clksel;
+	u32 cm_abe_pll_sys_clksel;
 	u32 cm_wkup_clkstctrl;
 	u32 cm_wkup_l4wkup_clkctrl;
 	u32 cm_wkup_wdtimer1_clkctrl;
@@ -328,6 +331,8 @@ struct prcm_regs {
 	u32 prm_sldo_mpu_ctrl;
 	u32 prm_sldo_mm_setup;
 	u32 prm_sldo_mm_ctrl;
+	u32 prm_abbldo_mpu_setup;
+	u32 prm_abbldo_mpu_ctrl;
 
 	u32 cm_div_m4_dpll_core;
 	u32 cm_div_m5_dpll_core;
@@ -346,10 +351,15 @@ struct prcm_regs {
 	u32 cm_l3init_usbphy_clkctrl;
 	u32 cm_l4per_mcbsp4_clkctrl;
 	u32 prm_vc_cfg_channel;
+
+	/* SCRM stuff, used by some boards */
+	u32 scrm_auxclk0;
+	u32 scrm_auxclk1;
 };
 
 struct omap_sys_ctrl_regs {
 	u32 control_status;
+	u32 control_std_fuse_opp_vdd_mpu_2;
 	u32 control_core_mmr_lock1;
 	u32 control_core_mmr_lock2;
 	u32 control_core_mmr_lock3;
@@ -362,6 +372,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_ldosram_iva_voltage_ctrl;
 	u32 control_ldosram_mpu_voltage_ctrl;
 	u32 control_ldosram_core_voltage_ctrl;
+	u32 control_usbotghs_ctrl;
 	u32 control_padconf_core_base;
 	u32 control_paconf_global;
 	u32 control_paconf_mode;
@@ -394,6 +405,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_ddrio_0;
 	u32 control_ddrio_1;
 	u32 control_ddrio_2;
+	u32 control_ddr_control_ext_0;
 	u32 control_lpddr2io1_0;
 	u32 control_lpddr2io1_1;
 	u32 control_lpddr2io1_2;
@@ -419,6 +431,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_port_emif2_sdram_config;
 	u32 control_emif1_sdram_config_ext;
 	u32 control_emif2_sdram_config_ext;
+	u32 control_wkup_ldovbb_mpu_voltage_ctrl;
 	u32 control_smart1nopmio_padconf_0;
 	u32 control_smart1nopmio_padconf_1;
 	u32 control_padconf_mode;
@@ -494,11 +507,25 @@ struct pmic_data {
 	u32 start_code;
 	unsigned gpio;
 	int gpio_en;
+	u32 i2c_slave_addr;
+	void (*pmic_bus_init)(void);
+	int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
+};
+
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg:	register address for efuse
+ * @reg_bits:	Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+	u32 reg;
+	u8 reg_bits;
 };
 
 struct volts {
 	u32 value;
 	u32 addr;
+	struct volts_efuse_data efuse;
 	struct pmic_data *pmic;
 };
 
@@ -506,6 +533,9 @@ struct vcores_data {
 	struct volts mpu;
 	struct volts core;
 	struct volts mm;
+	struct volts gpu;
+	struct volts eve;
+	struct volts iva;
 };
 
 extern struct prcm_regs const **prcm;
@@ -545,9 +575,9 @@ void enable_non_essential_clocks(void);
 void scale_vcores(struct vcores_data const *);
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
-
-/* Max value for DPLL multiplier M */
-#define OMAP_DPLL_MAX_N	127
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+	       u32 txdone, u32 txdone_mask, u32 opp);
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
 
 /* HW Init Context */
 #define OMAP_INIT_CONTEXT_SPL			0
@@ -555,11 +585,32 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL	2
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH	3
 
+/* ABB */
+#define OMAP_ABB_NOMINAL_OPP		0
+#define OMAP_ABB_FAST_OPP		1
+#define OMAP_ABB_SLOW_OPP		3
+#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK		(0x1 << 0)
+#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK		(0x1 << 1)
+#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK		(0x1 << 2)
+#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK		(0x1 << 6)
+#define OMAP_ABB_SETUP_SR2EN_MASK			(0x1 << 0)
+#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK		(0x1 << 2)
+#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK		(0x1 << 1)
+#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK		(0xff << 8)
+
 static inline u32 omap_revision(void)
 {
 	extern u32 *const omap_si_rev;
 	return *omap_si_rev;
 }
+
+#define OMAP54xx	0x54000000
+
+static inline u8 is_omap54xx(void)
+{
+	extern u32 *const omap_si_rev;
+	return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
+}
 #endif
 
 /*

+ 1 - 1
arch/arm/lib/cache.c

@@ -27,7 +27,7 @@
 
 void  __flush_cache(unsigned long start, unsigned long size)
 {
-#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136)
+#if defined(CONFIG_ARM1136)
 	void arm1136_cache_flush(void);
 
 	arm1136_cache_flush();

+ 2 - 2
arch/arm/lib/crt0.S

@@ -97,13 +97,13 @@ ENTRY(_main)
  * 'here' but relocated.
  */
 
-	ldr	sp, [r8, #GD_START_ADDR_SP]	/* r8 = gd->start_addr_sp */
+	ldr	sp, [r8, #GD_START_ADDR_SP]	/* sp = gd->start_addr_sp */
 	bic	sp, sp, #7	/* 8-byte alignment for ABI compliance */
 	ldr	r8, [r8, #GD_BD]		/* r8 = gd->bd */
 	sub	r8, r8, #GD_SIZE		/* new GD is below bd */
 
 	adr	lr, here
-	ldr	r0, [r8, #GD_RELOC_OFF]		/* lr = gd->start_addr_sp */
+	ldr	r0, [r8, #GD_RELOC_OFF]		/* r0 = gd->reloc_off */
 	add	lr, lr, r0
 	ldr	r0, [r8, #GD_RELOCADDR]		/* r0 = gd->relocaddr */
 	b	relocate_code

+ 0 - 1
board/boundary/nitrogen6x/nitrogen6x.c

@@ -336,7 +336,6 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
 
 void setup_spi(void)
 {
-	gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
 					 ARRAY_SIZE(ecspi1_pads));
 }

+ 42 - 0
board/congatec/cgtqmx6eval/Makefile

@@ -0,0 +1,42 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+# (C) Copyright 2013 Adeneo Embedded <www.adeneo-embedded.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).o
+
+COBJS  := cgtqmx6eval.o
+
+SRCS   := $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+
+$(LIB):        $(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

+ 29 - 0
board/congatec/cgtqmx6eval/README

@@ -0,0 +1,29 @@
+U-Boot for the Congatec Conga-QEVAl Evaluation Carrier board with
+qmx6 quad module.
+
+This file contains information for the port of U-Boot to the Congatec
+Conga-QEVAl Evaluation Carrier board with qmx6 quad module.
+
+1. Boot source, boot from SD card
+---------------------------------
+
+This version of u-boot works only on the SD card. By default, the
+Congatec board can boot only from the SPI-NOR.
+But, with the u-boot version provided with the board you can write boot
+registers to force the board to reboot and boot from the SD slot. If
+"bmode" command is not available from your pre-installed u-boot, these
+instruction will produce the same effect:
+
+conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850
+conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000
+conga-QMX6 U-Boot > reset
+resetting ...
+
+The the board will reboot and, if you have written your SD correctly
+the board will use u-boot that live into the SD
+
+To copy the resulting u-boot.imx to the SD card:
+
+ dd if=u-boot.imx of=/dev/xxx bs=512 seek=2
+
+Note: Replace xxx with the device representing the SD card in your system.

+ 167 - 0
board/congatec/cgtqmx6eval/cgtqmx6eval.c

@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Based on mx6qsabrelite.c file
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Leo Sartre, <lsartre@adeneo-embedded.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |\
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+iomux_v3_cfg_t const uart2_pads[] = {
+	MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const usdhc2_pads[] = {
+	MX6_PAD_SD2_CLK__USDHC2_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_CMD__USDHC2_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_GPIO_4__GPIO_1_4      | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const usdhc4_pads[] = {
+	MX6_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NANDF_D6__GPIO_2_6    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg usdhc_cfg[] = {
+	{USDHC2_BASE_ADDR},
+	{USDHC4_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC2_BASE_ADDR:
+		gpio_direction_input(IMX_GPIO_NR(1, 4));
+		ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
+		break;
+	case USDHC4_BASE_ADDR:
+		gpio_direction_input(IMX_GPIO_NR(2, 6));
+		ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
+		break;
+	default:
+		printf("Bad USDHC interface\n");
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	s32 status = 0;
+
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
+	imx_iomux_v3_setup_multiple_pads(
+				usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+	imx_iomux_v3_setup_multiple_pads(
+				usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+
+	status = fsl_esdhc_initialize(bis, &usdhc_cfg[0]) |
+		     fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
+
+	return status;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: Conga-QEVAL QMX6 Quad\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"mmc0",	MAKE_CFGVAL(0x50, 0x20, 0x00, 0x00)},
+	{"mmc1",	MAKE_CFGVAL(0x50, 0x38, 0x00, 0x00)},
+	{NULL,		0},
+};
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+	return 0;
+}

+ 43 - 112
board/davinci/da8xxevm/da830evm.c

@@ -39,135 +39,43 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/emif_defs.h>
 #include <asm/arch/emac_defs.h>
+#include <asm/arch/pinmux_defs.h>
 #include <asm/io.h>
 #include <nand.h>
 #include <asm/arch/nand_defs.h>
 #include <asm/arch/davinci_misc.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
-/* SPI0 pin muxer settings */
-static const struct pinmux_config spi0_pins[] = {
-	{ pinmux(7), 1, 3 },
-	{ pinmux(7), 1, 4 },
-	{ pinmux(7), 1, 5 },
-	{ pinmux(7), 1, 6 },
-	{ pinmux(7), 1, 7 }
-};
-
-/* EMIF-A bus pins for 8-bit NAND support on CS3 */
-static const struct pinmux_config emifa_nand_pins[] = {
-	{ pinmux(13), 1, 6 },
-	{ pinmux(13), 1, 7 },
-	{ pinmux(14), 1, 0 },
-	{ pinmux(14), 1, 1 },
-	{ pinmux(14), 1, 2 },
-	{ pinmux(14), 1, 3 },
-	{ pinmux(14), 1, 4 },
-	{ pinmux(14), 1, 5 },
-	{ pinmux(15), 1, 7 },
-	{ pinmux(16), 1, 0 },
-	{ pinmux(18), 1, 1 },
-	{ pinmux(18), 1, 4 },
-	{ pinmux(18), 1, 5 },
-};
-
-/* EMAC PHY interface pins */
-static const struct pinmux_config emac_pins[] = {
-	{ pinmux(9), 0, 5 },
-	{ pinmux(10), 2, 1 },
-	{ pinmux(10), 2, 2 },
-	{ pinmux(10), 2, 3 },
-	{ pinmux(10), 2, 4 },
-	{ pinmux(10), 2, 5 },
-	{ pinmux(10), 2, 6 },
-	{ pinmux(10), 2, 7 },
-	{ pinmux(11), 2, 0 },
-	{ pinmux(11), 2, 1 },
-};
-
-/* UART pin muxer settings */
-static const struct pinmux_config uart_pins[] = {
-	{ pinmux(8), 2, 7 },
-	{ pinmux(9), 2, 0 }
-};
-
-/* I2C pin muxer settings */
-static const struct pinmux_config i2c_pins[] = {
-	{ pinmux(8), 2, 3 },
-	{ pinmux(8), 2, 4 }
-};
-
-#ifdef CONFIG_USE_NAND
-/* NAND pin muxer settings */
-const struct pinmux_config aemif_pins[] = {
-	{ pinmux(13), 1, 6 },
-	{ pinmux(13), 1, 7 },
-	{ pinmux(14), 1, 0 },
-	{ pinmux(14), 1, 1 },
-	{ pinmux(14), 1, 2 },
-	{ pinmux(14), 1, 3 },
-	{ pinmux(14), 1, 4 },
-	{ pinmux(14), 1, 5 },
-	{ pinmux(14), 1, 6 },
-	{ pinmux(14), 1, 7 },
-	{ pinmux(15), 1, 0 },
-	{ pinmux(15), 1, 1 },
-	{ pinmux(15), 1, 2 },
-	{ pinmux(15), 1, 3 },
-	{ pinmux(15), 1, 4 },
-	{ pinmux(15), 1, 5 },
-	{ pinmux(15), 1, 6 },
-	{ pinmux(15), 1, 7 },
-	{ pinmux(16), 1, 0 },
-	{ pinmux(16), 1, 1 },
-	{ pinmux(16), 1, 2 },
-	{ pinmux(16), 1, 3 },
-	{ pinmux(16), 1, 4 },
-	{ pinmux(16), 1, 5 },
-	{ pinmux(16), 1, 6 },
-	{ pinmux(16), 1, 7 },
-	{ pinmux(17), 1, 0 },
-	{ pinmux(17), 1, 1 },
-	{ pinmux(17), 1, 2 },
-	{ pinmux(17), 1, 3 },
-	{ pinmux(17), 1, 4 },
-	{ pinmux(17), 1, 5 },
-	{ pinmux(17), 1, 6 },
-	{ pinmux(17), 1, 7 },
-	{ pinmux(18), 1, 0 },
-	{ pinmux(18), 1, 1 },
-	{ pinmux(18), 1, 2 },
-	{ pinmux(18), 1, 3 },
-	{ pinmux(18), 1, 4 },
-	{ pinmux(18), 1, 5 },
-	{ pinmux(18), 1, 6 },
-	{ pinmux(18), 1, 7 },
-	{ pinmux(10), 1, 0 }
-};
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
 #endif
 
-
-/* USB0_DRVVBUS pin muxer settings */
-static const struct pinmux_config usb_pins[] = {
-	{ pinmux(9), 1, 1 }
-};
+DECLARE_GLOBAL_DATA_PTR;
 
 static const struct pinmux_resource pinmuxes[] = {
 #ifdef CONFIG_SPI_FLASH
-	PINMUX_ITEM(spi0_pins),
+	PINMUX_ITEM(spi0_pins_base),
+	PINMUX_ITEM(spi0_pins_scs0),
+	PINMUX_ITEM(spi0_pins_ena),
 #endif
-	PINMUX_ITEM(uart_pins),
-	PINMUX_ITEM(i2c_pins),
+	PINMUX_ITEM(uart2_pins_txrx),
+	PINMUX_ITEM(i2c0_pins),
 #ifdef CONFIG_USB_DA8XX
 	PINMUX_ITEM(usb_pins),
 #endif
 #ifdef CONFIG_USE_NAND
-	PINMUX_ITEM(emifa_nand_pins),
-	PINMUX_ITEM(aemif_pins),
+	PINMUX_ITEM(emifa_pins),
+	PINMUX_ITEM(emifa_pins_cs0),
+	PINMUX_ITEM(emifa_pins_cs2),
+	PINMUX_ITEM(emifa_pins_cs3),
 #endif
 #if defined(CONFIG_DRIVER_TI_EMAC)
-	PINMUX_ITEM(emac_pins),
+	PINMUX_ITEM(emac_pins_rmii),
+	PINMUX_ITEM(emac_pins_mdio),
+	PINMUX_ITEM(emac_pins_rmii_clk_source),
+#endif
+#ifdef CONFIG_DAVINCI_MMC
+	PINMUX_ITEM(mmc0_pins_8bit)
 #endif
 };
 
@@ -177,8 +85,31 @@ static const struct lpsc_resource lpsc[] = {
 	{ DAVINCI_LPSC_EMAC },	/* image download */
 	{ DAVINCI_LPSC_UART2 },	/* console */
 	{ DAVINCI_LPSC_GPIO },
+#ifdef CONFIG_DAVINCI_MMC
+	{ DAVINCI_LPSC_MMC_SD },
+#endif
+
+};
+
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+	.host_caps = MMC_MODE_8BIT,
+	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.version = MMC_CTLR_VERSION_2,
 };
 
+int board_mmc_init(bd_t *bis)
+{
+	mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
+
+	printf("%x\n", mmc_sd0.input_clk);
+
+	/* Add slot-0 to mmc subsystem */
+	return davinci_mmc_init(bis, &mmc_sd0);
+}
+#endif
+
 int board_init(void)
 {
 #ifndef CONFIG_USE_IRQ

+ 6 - 0
board/freescale/mx23evk/mx23evk.c

@@ -43,6 +43,12 @@ int board_early_init_f(void)
 	/* SSP0 clock at 96MHz */
 	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
 
+	/* Power on LCD */
+	gpio_direction_output(MX23_PAD_LCD_RESET__GPIO_1_18, 1);
+
+	/* Set contrast to maximum */
+	gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
+
 	return 0;
 }
 

+ 32 - 0
board/freescale/mx23evk/spl_boot.c

@@ -27,6 +27,7 @@
 
 #define	MUX_CONFIG_SSP1	(MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_LCD	(MXS_PAD_4MA | MXS_PAD_NOPULL)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */
@@ -96,6 +97,37 @@ const iomux_cfg_t iomux_setup[] = {
 	/* Slot Power Enable */
 	MX23_PAD_PWM3__GPIO_1_29 |
 		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* LCD */
+	MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+	MX23_PAD_GPMI_D08__LCD_D18 | MUX_CONFIG_LCD,
+	MX23_PAD_GPMI_D09__LCD_D19 | MUX_CONFIG_LCD,
+	MX23_PAD_GPMI_D10__LCD_D20 | MUX_CONFIG_LCD,
+	MX23_PAD_GPMI_D11__LCD_D21 | MUX_CONFIG_LCD,
+	MX23_PAD_GPMI_D12__LCD_D22 | MUX_CONFIG_LCD,
+	MX23_PAD_GPMI_D13__LCD_D23 | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_DOTCK__LCD_DOTCK | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
+	MX23_PAD_LCD_RESET__GPIO_1_18 | MUX_CONFIG_LCD, /* LCD power */
+	MX23_PAD_PWM2__GPIO_1_28 | MUX_CONFIG_LCD, /* LCD contrast */
 };
 
 #define HW_DRAM_CTL14	(0x38 >> 2)

+ 33 - 0
board/freescale/mx28evk/iomux.c

@@ -30,6 +30,7 @@
 #define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
 #define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
 #define	MUX_CONFIG_SSP2	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define	MUX_CONFIG_LCD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */
@@ -162,6 +163,38 @@ const iomux_cfg_t iomux_setup[] = {
 	/* I2C */
 	MX28_PAD_I2C0_SCL__I2C0_SCL,
 	MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+	/* LCD */
+	MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_CS__LCD_ENABLE | MUX_CONFIG_LCD,
+	MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD, /* LCD power */
+	MX28_PAD_PWM2__GPIO_3_18 | MUX_CONFIG_LCD, /* LCD contrast */
 };
 
 #define HW_DRAM_CTL29	(0x74 >> 2)

+ 6 - 0
board/freescale/mx28evk/mx28evk.c

@@ -59,6 +59,12 @@ int board_early_init_f(void)
 	gpio_direction_output(MX28_PAD_AUART2_RX__GPIO_3_8, 1);
 #endif
 
+	/* Power on LCD */
+	gpio_direction_output(MX28_PAD_LCD_RESET__GPIO_3_30, 1);
+
+	/* Set contrast to maximum */
+	gpio_direction_output(MX28_PAD_PWM2__GPIO_3_18, 1);
+
 	return 0;
 }
 

+ 57 - 0
board/freescale/mx6qsabreauto/mx6qsabreauto.c

@@ -26,12 +26,14 @@
 #include <asm/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/boot_mode.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/sys_proto.h>
+#include <i2c.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,6 +48,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
 
+#define I2C_PAD_CTRL	(PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -76,6 +84,45 @@ iomux_v3_cfg_t const enet_pads[] = {
 	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 };
 
+/* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */
+struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
+		.gpio_mode = MX6_PAD_EIM_EB2__GPIO_2_30 | PC,
+		.gp = IMX_GPIO_NR(2, 30)
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
+		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC,
+		.gp = IMX_GPIO_NR(4, 13)
+	}
+};
+
+/*
+ * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor,
+ * Compass Sensor, Accelerometer, Res Touch
+ */
+struct i2c_pads_info i2c_pad_info2 = {
+	.scl = {
+		.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
+		.gpio_mode = MX6_PAD_GPIO_3__GPIO_1_3 | PC,
+		.gp = IMX_GPIO_NR(1, 3)
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
+		.gpio_mode = MX6_PAD_EIM_D18__GPIO_3_18 | PC,
+		.gp = IMX_GPIO_NR(3, 18)
+	}
+};
+
+iomux_v3_cfg_t const i2c3_pads[] = {
+	MX6_PAD_EIM_A24__GPIO_5_4		| MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const port_exp[] = {
+	MX6_PAD_SD2_DAT0__GPIO_1_15		| MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
 static void setup_iomux_enet(void)
 {
 	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
@@ -216,6 +263,16 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+	/* I2C 2 and 3 setup - I2C 3 hw mux with EIM */
+	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+	/* I2C 3 Steer */
+	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
+	imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads));
+	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+
+	gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
+	imx_iomux_v3_setup_multiple_pads(port_exp, ARRAY_SIZE(port_exp));
+
 	return 0;
 }
 

+ 0 - 1
board/freescale/mx6qsabrelite/mx6qsabrelite.c

@@ -308,7 +308,6 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
 
 void setup_spi(void)
 {
-	gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
 					 ARRAY_SIZE(ecspi1_pads));
 }

+ 39 - 0
board/freescale/vf610twr/Makefile

@@ -0,0 +1,39 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

+ 33 - 0
board/freescale/vf610twr/imximage.cfg

@@ -0,0 +1,33 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/imx-common/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION	2
+
+/* Boot Offset 0x400, valid for both SD and NAND boot */
+BOOT_OFFSET	FLASH_OFFSET_STANDARD

+ 407 - 0
board/freescale/vf610twr/vf610twr.c

@@ -0,0 +1,407 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-vf610.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <miiphy.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+			PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE)
+
+#define ESDHC_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
+			PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
+
+#define ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
+			PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
+
+void setup_iomux_ddr(void)
+{
+	static const iomux_v3_cfg_t ddr_pads[] = {
+		VF610_PAD_DDR_A15__DDR_A_15,
+		VF610_PAD_DDR_A15__DDR_A_15,
+		VF610_PAD_DDR_A14__DDR_A_14,
+		VF610_PAD_DDR_A13__DDR_A_13,
+		VF610_PAD_DDR_A12__DDR_A_12,
+		VF610_PAD_DDR_A11__DDR_A_11,
+		VF610_PAD_DDR_A10__DDR_A_10,
+		VF610_PAD_DDR_A9__DDR_A_9,
+		VF610_PAD_DDR_A8__DDR_A_8,
+		VF610_PAD_DDR_A7__DDR_A_7,
+		VF610_PAD_DDR_A6__DDR_A_6,
+		VF610_PAD_DDR_A5__DDR_A_5,
+		VF610_PAD_DDR_A4__DDR_A_4,
+		VF610_PAD_DDR_A3__DDR_A_3,
+		VF610_PAD_DDR_A2__DDR_A_2,
+		VF610_PAD_DDR_A1__DDR_A_1,
+		VF610_PAD_DDR_BA2__DDR_BA_2,
+		VF610_PAD_DDR_BA1__DDR_BA_1,
+		VF610_PAD_DDR_BA0__DDR_BA_0,
+		VF610_PAD_DDR_CAS__DDR_CAS_B,
+		VF610_PAD_DDR_CKE__DDR_CKE_0,
+		VF610_PAD_DDR_CLK__DDR_CLK_0,
+		VF610_PAD_DDR_CS__DDR_CS_B_0,
+		VF610_PAD_DDR_D15__DDR_D_15,
+		VF610_PAD_DDR_D14__DDR_D_14,
+		VF610_PAD_DDR_D13__DDR_D_13,
+		VF610_PAD_DDR_D12__DDR_D_12,
+		VF610_PAD_DDR_D11__DDR_D_11,
+		VF610_PAD_DDR_D10__DDR_D_10,
+		VF610_PAD_DDR_D9__DDR_D_9,
+		VF610_PAD_DDR_D8__DDR_D_8,
+		VF610_PAD_DDR_D7__DDR_D_7,
+		VF610_PAD_DDR_D6__DDR_D_6,
+		VF610_PAD_DDR_D5__DDR_D_5,
+		VF610_PAD_DDR_D4__DDR_D_4,
+		VF610_PAD_DDR_D3__DDR_D_3,
+		VF610_PAD_DDR_D2__DDR_D_2,
+		VF610_PAD_DDR_D1__DDR_D_1,
+		VF610_PAD_DDR_D0__DDR_D_0,
+		VF610_PAD_DDR_DQM1__DDR_DQM_1,
+		VF610_PAD_DDR_DQM0__DDR_DQM_0,
+		VF610_PAD_DDR_DQS1__DDR_DQS_1,
+		VF610_PAD_DDR_DQS0__DDR_DQS_0,
+		VF610_PAD_DDR_RAS__DDR_RAS_B,
+		VF610_PAD_DDR_WE__DDR_WE_B,
+		VF610_PAD_DDR_ODT1__DDR_ODT_0,
+		VF610_PAD_DDR_ODT0__DDR_ODT_1,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads));
+}
+
+void ddr_phy_init(void)
+{
+	struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
+
+	writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[0]);
+	writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[16]);
+	writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[32]);
+	writel(DDRMC_PHY_DQ_TIMING, &ddrmr->phy[48]);
+
+	writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[1]);
+	writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[17]);
+	writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[33]);
+	writel(DDRMC_PHY_DQS_TIMING, &ddrmr->phy[49]);
+
+	writel(DDRMC_PHY_CTRL, &ddrmr->phy[2]);
+	writel(DDRMC_PHY_CTRL, &ddrmr->phy[18]);
+	writel(DDRMC_PHY_CTRL, &ddrmr->phy[34]);
+	writel(DDRMC_PHY_CTRL, &ddrmr->phy[50]);
+
+	writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[3]);
+	writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[19]);
+	writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[35]);
+	writel(DDRMC_PHY_MASTER_CTRL, &ddrmr->phy[51]);
+
+	writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[4]);
+	writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[20]);
+	writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[36]);
+	writel(DDRMC_PHY_SLAVE_CTRL, &ddrmr->phy[52]);
+
+	writel(DDRMC_PHY50_DDR3_MODE | DDRMC_PHY50_EN_SW_HALF_CYCLE,
+		&ddrmr->phy[50]);
+}
+
+void ddr_ctrl_init(void)
+{
+	struct ddrmr_regs *ddrmr = (struct ddrmr_regs *)DDR_BASE_ADDR;
+
+	writel(DDRMC_CR00_DRAM_CLASS_DDR3, &ddrmr->cr[0]);
+	writel(DDRMC_CR02_DRAM_TINIT(32), &ddrmr->cr[2]);
+	writel(DDRMC_CR10_TRST_PWRON(124), &ddrmr->cr[10]);
+
+	writel(DDRMC_CR11_CKE_INACTIVE(80000), &ddrmr->cr[11]);
+	writel(DDRMC_CR12_WRLAT(5) | DDRMC_CR12_CASLAT_LIN(12), &ddrmr->cr[12]);
+	writel(DDRMC_CR13_TRC(21) | DDRMC_CR13_TRRD(4) | DDRMC_CR13_TCCD(4) |
+		DDRMC_CR13_TBST_INT_INTERVAL(4), &ddrmr->cr[13]);
+	writel(DDRMC_CR14_TFAW(20) | DDRMC_CR14_TRP(6) | DDRMC_CR14_TWTR(4) |
+		DDRMC_CR14_TRAS_MIN(15), &ddrmr->cr[14]);
+	writel(DDRMC_CR16_TMRD(4) | DDRMC_CR16_TRTP(4), &ddrmr->cr[16]);
+	writel(DDRMC_CR17_TRAS_MAX(28080) | DDRMC_CR17_TMOD(12),
+		&ddrmr->cr[17]);
+	writel(DDRMC_CR18_TCKESR(4) | DDRMC_CR18_TCKE(3), &ddrmr->cr[18]);
+
+	writel(DDRMC_CR20_AP_EN, &ddrmr->cr[20]);
+	writel(DDRMC_CR21_TRCD_INT(6) | DDRMC_CR21_TRAS_LOCKOUT |
+		DDRMC_CR21_CCMAP_EN, &ddrmr->cr[21]);
+
+	writel(DDRMC_CR22_TDAL(11), &ddrmr->cr[22]);
+	writel(DDRMC_CR23_BSTLEN(3) | DDRMC_CR23_TDLL(512), &ddrmr->cr[23]);
+	writel(DDRMC_CR24_TRP_AB(6), &ddrmr->cr[24]);
+
+	writel(DDRMC_CR25_TREF_EN, &ddrmr->cr[25]);
+	writel(DDRMC_CR26_TREF(3112) | DDRMC_CR26_TRFC(44), &ddrmr->cr[26]);
+	writel(DDRMC_CR28_TREF_INT(5), &ddrmr->cr[28]);
+	writel(DDRMC_CR29_TPDEX(3), &ddrmr->cr[29]);
+
+	writel(DDRMC_CR30_TXPDLL(10), &ddrmr->cr[30]);
+	writel(DDRMC_CR31_TXSNR(68) | DDRMC_CR31_TXSR(512), &ddrmr->cr[31]);
+	writel(DDRMC_CR33_EN_QK_SREF, &ddrmr->cr[33]);
+	writel(DDRMC_CR34_CKSRX(5) | DDRMC_CR34_CKSRE(5), &ddrmr->cr[34]);
+
+	writel(DDRMC_CR38_FREQ_CHG_EN, &ddrmr->cr[38]);
+	writel(DDRMC_CR39_PHY_INI_COM(1024) | DDRMC_CR39_PHY_INI_STA(16) |
+		DDRMC_CR39_FRQ_CH_DLLOFF(2), &ddrmr->cr[39]);
+
+	writel(DDRMC_CR41_PHY_INI_STRT_INI_DIS, &ddrmr->cr[41]);
+	writel(DDRMC_CR48_MR1_DA_0(70) | DDRMC_CR48_MR0_DA_0(1056),
+		&ddrmr->cr[48]);
+
+	writel(DDRMC_CR66_ZQCL(256) | DDRMC_CR66_ZQINIT(512), &ddrmr->cr[66]);
+	writel(DDRMC_CR67_ZQCS(64), &ddrmr->cr[67]);
+	writel(DDRMC_CR69_ZQ_ON_SREF_EX(2), &ddrmr->cr[69]);
+
+	writel(DDRMC_CR70_REF_PER_ZQ(64), &ddrmr->cr[70]);
+	writel(DDRMC_CR72_ZQCS_ROTATE, &ddrmr->cr[72]);
+
+	writel(DDRMC_CR73_APREBIT(10) | DDRMC_CR73_COL_DIFF(1) |
+		DDRMC_CR73_ROW_DIFF(3), &ddrmr->cr[73]);
+	writel(DDRMC_CR74_BANKSPLT_EN | DDRMC_CR74_ADDR_CMP_EN |
+		DDRMC_CR74_CMD_AGE_CNT(255) | DDRMC_CR74_AGE_CNT(255),
+		&ddrmr->cr[74]);
+	writel(DDRMC_CR75_RW_PG_EN | DDRMC_CR75_RW_EN | DDRMC_CR75_PRI_EN |
+		DDRMC_CR75_PLEN, &ddrmr->cr[75]);
+	writel(DDRMC_CR76_NQENT_ACTDIS(3) | DDRMC_CR76_D_RW_G_BKCN(3) |
+		DDRMC_CR76_W2R_SPLT_EN | DDRMC_CR76_CS_EN, &ddrmr->cr[76]);
+	writel(DDRMC_CR77_CS_MAP | DDRMC_CR77_DI_RD_INTLEAVE |
+		DDRMC_CR77_SWAP_EN, &ddrmr->cr[77]);
+	writel(DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]);
+	writel(DDRMC_CR79_CTLUPD_AREF, &ddrmr->cr[79]);
+
+	writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]);
+
+	writel(DDRMC_CR87_ODT_WR_MAPCS0 | DDRMC_CR87_ODT_RD_MAPCS0,
+		&ddrmr->cr[87]);
+	writel(DDRMC_CR88_TODTL_CMD(4), &ddrmr->cr[88]);
+	writel(DDRMC_CR89_AODT_RWSMCS(2), &ddrmr->cr[89]);
+
+	writel(DDRMC_CR91_R2W_SMCSDL(2), &ddrmr->cr[91]);
+	writel(DDRMC_CR96_WLMRD(40) | DDRMC_CR96_WLDQSEN(25), &ddrmr->cr[96]);
+
+	writel(DDRMC_CR105_RDLVL_DL_0(32), &ddrmr->cr[105]);
+	writel(DDRMC_CR110_RDLVL_DL_1(32), &ddrmr->cr[110]);
+	writel(DDRMC_CR114_RDLVL_GTDL_2(8224), &ddrmr->cr[114]);
+
+	writel(DDRMC_CR117_AXI0_W_PRI(1) | DDRMC_CR117_AXI0_R_PRI(1),
+		&ddrmr->cr[117]);
+	writel(DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1),
+		&ddrmr->cr[118]);
+
+	writel(DDRMC_CR120_AXI0_PRI1_RPRI(2) | DDRMC_CR120_AXI0_PRI0_RPRI(2),
+		&ddrmr->cr[120]);
+	writel(DDRMC_CR121_AXI0_PRI3_RPRI(2) | DDRMC_CR121_AXI0_PRI2_RPRI(2),
+		&ddrmr->cr[121]);
+	writel(DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
+		DDRMC_CR122_AXI0_PRIRLX(100), &ddrmr->cr[122]);
+	writel(DDRMC_CR123_AXI1_PRI3_RPRI(1) | DDRMC_CR123_AXI1_PRI2_RPRI(1),
+		&ddrmr->cr[123]);
+	writel(DDRMC_CR124_AXI1_PRIRLX(100), &ddrmr->cr[124]);
+
+	writel(DDRMC_CR126_PHY_RDLAT(11), &ddrmr->cr[126]);
+	writel(DDRMC_CR132_WRLAT_ADJ(5) | DDRMC_CR132_RDLAT_ADJ(6),
+		&ddrmr->cr[132]);
+	writel(DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
+		DDRMC_CR139_PHY_WRLV_DLL(3) | DDRMC_CR139_PHY_WRLV_EN(3),
+		&ddrmr->cr[139]);
+
+	writel(DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
+		DDRMC_CR154_PAD_ZQ_MODE(1), &ddrmr->cr[154]);
+	writel(DDRMC_CR155_AXI0_AWCACHE | DDRMC_CR155_PAD_ODT_BYTE1(2),
+		&ddrmr->cr[155]);
+	writel(DDRMC_CR158_TWR(6), &ddrmr->cr[158]);
+
+	ddr_phy_init();
+
+	writel(DDRMC_CR00_DRAM_CLASS_DDR3 | DDRMC_CR00_START, &ddrmr->cr[0]);
+
+	udelay(200);
+}
+
+int dram_init(void)
+{
+	setup_iomux_ddr();
+
+	ddr_ctrl_init();
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+	static const iomux_v3_cfg_t uart1_pads[] = {
+		NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static void setup_iomux_enet(void)
+{
+	static const iomux_v3_cfg_t enet0_pads[] = {
+		NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKIN, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC1__RMII0_MDIO, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC0__RMII0_MDC, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC2__RMII0_CRS_DV, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC3__RMII0_RD1, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC4__RMII0_RD0, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC5__RMII0_RXER, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC6__RMII0_TD1, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC7__RMII0_TD0, ENET_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTC8__RMII0_TXEN, ENET_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+	{ESDHC1_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	/* eSDHC1 is always present */
+	return 1;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	static const iomux_v3_cfg_t esdhc1_pads[] = {
+		NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
+		NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
+	};
+
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+	imx_iomux_v3_setup_multiple_pads(
+		esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
+
+	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
+static void clock_init(void)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
+
+	clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
+		CCM_CCGR0_UART1_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
+		CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
+		CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
+		CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
+		CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
+		CCM_CCGR3_ANADIG_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
+		CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
+		CCM_CCGR4_GPC_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
+		CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
+		CCM_CCGR7_SDHC1_CTRL_MASK);
+	clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
+		CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
+
+	clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN,
+		ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT);
+	clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN,
+		ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT);
+
+	clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK,
+		CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5));
+	clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK,
+		CCM_CCSR_PLL1_PFD_CLK_SEL(3) | CCM_CCSR_PLL2_PFD4_EN |
+		CCM_CCSR_PLL2_PFD3_EN | CCM_CCSR_PLL2_PFD2_EN |
+		CCM_CCSR_PLL2_PFD1_EN | CCM_CCSR_PLL1_PFD4_EN |
+		CCM_CCSR_PLL1_PFD3_EN | CCM_CCSR_PLL1_PFD2_EN |
+		CCM_CCSR_PLL1_PFD1_EN | CCM_CCSR_DDRC_CLK_SEL(1) |
+		CCM_CCSR_FAST_CLK_SEL(1) | CCM_CCSR_SYS_CLK_SEL(4));
+	clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK,
+		CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
+		CCM_CACRR_ARM_CLK_DIV(0));
+	clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
+		CCM_CSCMR1_ESDHC1_CLK_SEL(3));
+	clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
+		CCM_CSCDR1_RMII_CLK_EN);
+	clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
+		CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0));
+	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
+		CCM_CSCMR2_RMII_CLK_SEL(0));
+}
+
+static void mscm_init(void)
+{
+	struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR;
+	int i;
+
+	for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+		writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	clock_init();
+	mscm_init();
+
+	setup_iomux_uart();
+	setup_iomux_enet();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: vf610twr\n");
+
+	return 0;
+}

+ 1 - 1
board/htkw/mcx/mcx.c

@@ -28,7 +28,7 @@
 #include <asm/gpio.h>
 #include <asm/omap_gpio.h>
 #include <asm/arch/dss.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include "errno.h"
 #include <i2c.h>
 #ifdef CONFIG_USB_EHCI

+ 6 - 10
board/ti/omap2420h4/Makefile → board/icpdas/lp8x4x/Makefile

@@ -1,9 +1,7 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# ICPDAS LP-8x4x Support
 #
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -25,15 +23,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= omap2420h4.o mem.o sys_info.o
-SOBJS	:= lowlevel_init.o
+COBJS	:= lp8x4x.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
 
 #########################################################################
 

+ 147 - 0
board/icpdas/lp8x4x/lp8x4x.c

@@ -0,0 +1,147 @@
+/*
+ * ICP DAS LP-8x4x Support
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * adapted from Voipac PXA270 Support by
+ * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/regs-mmc.h>
+#include <asm/arch/pxa.h>
+#include <netdev.h>
+#include <serial.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	/* We have RAM, disable cache */
+	dcache_disable();
+	icache_disable();
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	pxa2xx_dram_init();
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+#ifdef	CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
+#ifdef	CONFIG_CMD_USB
+int usb_board_init(void)
+{
+	writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+		UHCHR);
+
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+
+	while (readl(UHCHR) & UHCHR_FSBIR)
+		continue; /* required by checkpath.pl */
+
+	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
+
+	/* Clear any OTG Pin Hold */
+	if (readl(PSSR) & PSSR_OTGPH)
+		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
+
+	writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+	writel(readl(UHCRHDA) | 0x100, UHCRHDA);
+
+	/* Set port power control mask bits, only 3 ports. */
+	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
+
+	/* enable port 2 */
+	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+		UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
+
+	return 0;
+}
+
+void usb_board_init_fail(void)
+{
+	return;
+}
+
+void usb_board_stop(void)
+{
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+	udelay(11);
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+	writel(readl(UHCCOMS) | 1, UHCCOMS);
+	udelay(10);
+
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
+
+	return;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+void lp8x4x_eth1_mac_init(void)
+{
+	u8 eth1addr[8];
+	int i;
+	u8 reg;
+
+	eth_getenv_enetaddr_by_index("eth", 1, eth1addr);
+	if (!is_valid_ether_addr(eth1addr))
+		return;
+
+	for (i = 0, reg = 0x10; i < 6; i++, reg++) {
+		writeb(reg, (u8 *)(DM9000_IO_2));
+		writeb(eth1addr[i], (u8 *)(DM9000_DATA_2));
+	}
+}
+
+int board_eth_init(bd_t *bis)
+{
+	lp8x4x_eth1_mac_init();
+	return dm9000_initialize(bis);
+}
+#endif

+ 2 - 2
board/keymile/km_arm/km_arm.c

@@ -160,7 +160,7 @@ int ethernet_present(void)
 }
 #endif
 
-int initialize_unit_leds(void)
+static int initialize_unit_leds(void)
 {
 	/*
 	 * Init the unit LEDs per default they all are
@@ -181,7 +181,7 @@ int initialize_unit_leds(void)
 }
 
 #if defined(CONFIG_BOOTCOUNT_LIMIT)
-void set_bootcount_addr(void)
+static void set_bootcount_addr(void)
 {
 	uchar buf[32];
 	unsigned int bootcountaddr;

+ 1 - 1
board/teejet/mt_ventoux/mt_ventoux.c

@@ -31,7 +31,7 @@
 #include <asm/omap_gpio.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/dss.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <i2c.h>
 #include <spartan3.h>
 #include <asm/gpio.h>

+ 2 - 0
board/ti/am335x/board.c

@@ -514,6 +514,7 @@ int board_eth_init(bd_t *bis)
 			eth_setenv_enetaddr("ethaddr", mac_addr);
 	}
 
+#ifdef CONFIG_DRIVER_TI_CPSW
 	if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
 		writel(MII_MODE_ENABLE, &cdev->miisel);
 		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
@@ -529,6 +530,7 @@ int board_eth_init(bd_t *bis)
 		printf("Error %d registering CPSW switch\n", rv);
 	else
 		n += rv;
+#endif
 
 	/*
 	 *

+ 24 - 14
board/ti/dra7xx/mux_data.h

@@ -29,19 +29,29 @@
 #include <asm/arch/mux_dra7xx.h>
 
 const struct pad_conf_entry core_padconf_array_essential[] = {
-	{MMC1_CLK, (PTU | IEN | M0)},	/* MMC1_CLK */
-	{MMC1_CMD, (PTU | IEN | M0)},   /* MMC1_CMD */
-	{MMC1_DAT0, (PTU | IEN | M0)},  /* MMC1_DAT0 */
-	{MMC1_DAT1, (PTU | IEN | M0)},  /* MMC1_DAT1 */
-	{MMC1_DAT2, (PTU | IEN | M0)},  /* MMC1_DAT2 */
-	{MMC1_DAT3, (PTU | IEN | M0)},  /* MMC1_DAT3 */
-	{MMC1_SDCD, (PTU | IEN | M0)},  /* MMC1_SDCD */
-	{MMC1_SDWP, (PTU | IEN | M0)},  /* MMC1_SDWP */
-	{UART1_RXD, (PTU | IEN | M0)},  /* UART1_RXD */
-	{UART1_TXD, (M0)},              /* UART1_TXD */
-	{UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */
-	{UART1_RTSN, (M0)},             /* UART1_RTSN */
-	{I2C1_SDA, (PTU | IEN | M0)},   /* I2C1_SDA */
-	{I2C1_SCL, (PTU | IEN | M0)},   /* I2C1_SCL */
+	{MMC1_CLK, (IEN | PTU | PDIS | M0)},	/* MMC1_CLK */
+	{MMC1_CMD, (IEN | PTU | PDIS | M0)},	/* MMC1_CMD */
+	{MMC1_DAT0, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT0 */
+	{MMC1_DAT1, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT1 */
+	{MMC1_DAT2, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT2 */
+	{MMC1_DAT3, (IEN | PTU | PDIS | M0)},	/* MMC1_DAT3 */
+	{MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
+	{MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+	{GPMC_A19, (IEN | PTU | PDIS | M1)},	/* mmc2_dat4 */
+	{GPMC_A20, (IEN | PTU | PDIS | M1)},	/* mmc2_dat5 */
+	{GPMC_A21, (IEN | PTU | PDIS | M1)},	/* mmc2_dat6 */
+	{GPMC_A22, (IEN | PTU | PDIS | M1)},	/* mmc2_dat7 */
+	{GPMC_A23, (IEN | PTU | PDIS | M1)},	/* mmc2_clk */
+	{GPMC_A24, (IEN | PTU | PDIS | M1)},	/* mmc2_dat0 */
+	{GPMC_A25, (IEN | PTU | PDIS | M1)},	/* mmc2_dat1 */
+	{GPMC_A26, (IEN | PTU | PDIS | M1)},	/* mmc2_dat2 */
+	{GPMC_A27, (IEN | PTU | PDIS | M1)},	/* mmc2_dat3 */
+	{GPMC_CS1, (IEN | PTU | PDIS | M1)},	/* mmm2_cmd */
+	{UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */
+	{UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */
+	{UART1_CTSN, (IEN | PTU | PDIS | M3)},	/* UART1_CTSN */
+	{UART1_RTSN, (IEN | PTU | PDIS | M3)},	/* UART1_RTSN */
+	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
+	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
 };
 #endif /* _MUX_DATA_DRA7XX_H_ */

+ 0 - 28
board/ti/omap2420h4/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-#
-# TI H4 board with OMAP2420 (ARM1136) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
-# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1) ES2 will be configurable
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-#CONFIG_SYS_TEXT_BASE = 0x80e80000
-
-# Used with full SRAM boot.
-# This is either with a GP system or a signed boot image.
-# easiest, and safest way to go if you can.
-#CONFIG_SYS_TEXT_BASE = 0x40270000
-
-
-# Handy to get symbols to debug ROM version.
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x08000000
-#CONFIG_SYS_TEXT_BASE = 0x04000000

+ 0 - 185
board/ti/omap2420h4/lowlevel_init.S

@@ -1,185 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/omap2420.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	/* sdram load addr from config.mk */
-
-/**************************************************************************
- * cpy_clk_code: relocates clock code into SRAM where its safer to execute
- * R1 = SRAM destination address.
- *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
-	/* Copy DPLL code into SRAM */
-	adr	r0, go_to_speed		/* get addr of clock setting code */
-	mov	r2, #384		/* r2 size to copy (div by 32 bytes) */
-	mov	r1, r1			/* r1 <- dest address (passed in) */
-	add	r2, r2, r0		/* r2 <- source end address */
-next2:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	bne	next2
-	mov	pc, lr			/* back to caller */
-
-/* ****************************************************************************
- *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- *		 -executed from SRAM.
- *  R0 = PRCM_CLKCFG_CTRL - addr of valid reg
- *  R1 = CM_CLKEN_PLL - addr dpll ctlr reg
- *  R2 = dpll value
- *  R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- ******************************************************************************/
-.global go_to_speed
- go_to_speed:
-	sub	sp, sp, #0x4 /* get some stack space */
-	str	r4, [sp]     /* save r4's value */
-
-	/* move into fast relock bypass */
-	ldr	r8, pll_ctl_add
-	mov	r4, #0x2
-	str	r4, [r8]
-	ldr	r4, pll_stat
-block:
-	ldr	r8, [r4]	/* wait for bypass to take effect */
-	and	r8, r8, #0x3
-	cmp	r8, #0x1
-	bne	block
-
-	/* set new dpll dividers _after_ in bypass */
-	ldr	r4, pll_div_add
-	ldr	r8, pll_div_val
-	str	r8, [r4]
-
-	/* now prepare GPMC (flash) for new dpll speed */
-	/* flash needs to be stable when we jump back to it */
-	ldr	r4, cfg3_0_addr
-	ldr	r8, cfg3_0_val
-	str	r8, [r4]
-	ldr	r4, cfg4_0_addr
-	ldr	r8, cfg4_0_val
-	str	r8, [r4]
-	ldr	r4, cfg1_0_addr
-	ldr	r8, [r4]
-	orr	r8, r8, #0x3	 /* up gpmc divider */
-	str	r8, [r4]
-
-	/* setup to 2x loop though code.  The first loop pre-loads the
-	 * icache, the 2nd commits the prcm config, and locks the dpll
-	 */
-	mov	r4, #0x1000	 /* spin spin spin */
-	mov	r8, #0x4	 /* first pass condition & set registers */
-	cmp	r8, #0x4
-2:
-	ldrne	r8, [r3]	 /* DPLL lock check */
-	and	r8, r8, #0x7
-	cmp	r8, #0x2
-	beq	4f
-3:
-	subeq	r8, r8, #0x1
-	streq	r8, [r0]	 /* commit dividers (2nd time) */
-	nop
-lloop1:
-	sub	r4, r4, #0x1	/* Loop currently necessary else bad jumps */
-	nop
-	cmp	r4, #0x0
-	bne	lloop1
-	mov	r4, #0x40000
-	cmp	r8, #0x1
-	nop
-	streq	r2, [r1]	/* lock dpll (2nd time) */
-	nop
-lloop2:
-	sub	r4, r4, #0x1	/* loop currently necessary else bad jumps */
-	nop
-	cmp	r4, #0x0
-	bne	lloop2
-	mov	r4, #0x40000
-	cmp	r8, #0x1
-	nop
-	ldreq	r8, [r3]	 /* get lock condition for dpll */
-	cmp	r8, #0x4	 /* first time though? */
-	bne	2b
-	moveq	r8, #0x2	 /* set to dpll check condition. */
-	beq	3b		 /* if condition not true branch */
-4:
-	ldr	r4, [sp]
-	add	sp, sp, #0x4	 /* return stack space */
-	mov	pc, lr		 /* back to caller, locked */
-
-_go_to_speed: .word go_to_speed
-
-/* these constants need to be close for PIC code */
-cfg3_0_addr:
-    .word  GPMC_CONFIG3_0
-cfg3_0_val:
-    .word  H4_24XX_GPMC_CONFIG3_0
-cfg4_0_addr:
-    .word  GPMC_CONFIG4_0
-cfg4_0_val:
-    .word  H4_24XX_GPMC_CONFIG4_0
-cfg1_0_addr:
-    .word  GPMC_CONFIG1_0
-pll_ctl_add:
-    .word CM_CLKEN_PLL
-pll_stat:
-    .word CM_IDLEST_CKGEN
-pll_div_add:
-    .word CM_CLKSEL1_PLL
-pll_div_val:
-    .word DPLL_VAL	/* DPLL setting (300MHz default) */
-
-.globl lowlevel_init
-lowlevel_init:
-	ldr	sp,	SRAM_STACK
-	str	ip,	[sp]	/* stash old link register */
-	mov	ip,	lr	/* save link reg across call */
-	bl	s_init		/* go setup pll,mux,memory */
-	ldr	ip,	[sp]	/* restore save ip */
-	mov	lr,	ip	/* restore link reg */
-
-	/* map interrupt controller */
-	ldr	r0,	VAL_INTH_SETUP
-	mcr	p15, 0, r0, c15, c2, 4
-
-	/* back to arch calling code */
-	mov	pc,	lr
-
-	/* the literal pools origin */
-	.ltorg
-
-REG_CONTROL_STATUS:
-	.word CONTROL_STATUS
-VAL_INTH_SETUP:
-	.word PERIFERAL_PORT_BASE
-SRAM_STACK:
-	.word LOW_LEVEL_SRAM_STACK

+ 0 - 362
board/ti/omap2420h4/mem.c

@@ -1,362 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-
-/************************************************************
- * sdelay() - simple spin loop.  Will be constant time as
- *  its generally used in 12MHz bypass conditions only.  This
- *  is necessary until timers are accessible.
- *
- *  not inline to increase chances its in cache when called
- *************************************************************/
-void sdelay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*********************************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
- *   -- called from SRAM, or Flash (using temp SRAM stack).
- *********************************************************************************/
-void prcm_init(void)
-{
-	u32 div;
-	void (*f_lock_pll) (u32, u32, u32, u32);
-	extern void *_end_vect, *_start;
-
-	f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
-
-	__raw_writel(0, CM_FCLKEN1_CORE);	   /* stop all clocks to reduce ringing */
-	__raw_writel(0, CM_FCLKEN2_CORE);	   /* may not be necessary */
-	__raw_writel(0, CM_ICLKEN1_CORE);
-	__raw_writel(0, CM_ICLKEN2_CORE);
-
-	__raw_writel(DPLL_OUT, CM_CLKSEL2_PLL);	/* set DPLL out */
-	__raw_writel(MPU_DIV, CM_CLKSEL_MPU);	/* set MPU divider */
-	__raw_writel(DSP_DIV, CM_CLKSEL_DSP);	/* set dsp and iva dividers */
-	__raw_writel(GFX_DIV, CM_CLKSEL_GFX);	/* set gfx dividers */
-
-	div = BUS_DIV;
-	__raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
-	sdelay(1000);
-
-	if(running_in_sram()){
-		/* If running fully from SRAM this is OK.  The Flash bus drops out for just a little.
-		* but then comes back.  If running from Flash this sequence kills you, thus you need
-		* to run it using CONFIG_PARTIAL_SRAM.
-		*/
-		__raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
-		wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
-		sdelay(1000);
-		/* set clock selection and dpll dividers. */
-		__raw_writel(DPLL_VAL, CM_CLKSEL1_PLL);	 /* set pll for target rate */
-		__raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
-		sdelay(10000);
-		__raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
-		sdelay(10000);
-		wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY);  /*wait for dpll lock */
-	}else if(running_in_flash()){
-		/* if running from flash, need to jump to small relocated code area in SRAM.
-		 * This is the only safe spot to do configurations from.
-		 */
-		(*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
-	}
-
-	__raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL);   /* enable apll */
-	wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY);	/* wait for apll lock */
-	sdelay(1000);
-}
-
-/**************************************************************************
- * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
- *  command line mem=xyz use all memory with out discontigious support
- *  compiled in.  Could do it at the ATAG, but there really is two banks...
- * Called as part of 2nd phase DDR init.
- **************************************************************************/
-void make_cs1_contiguous(void)
-{
-	u32 size, a_add_low, a_add_high;
-
-	size = get_sdr_cs_size(SDRC_CS0_OSET);
-	size /= SZ_32M;  /* find size to offset CS1 */
-	a_add_high = (size & 3) << 8;   /* set up low field */
-	a_add_low = (size & 0x3C) >> 2; /* set up high field */
-	__raw_writel((a_add_high|a_add_low),SDRC_CS_CFG);
-
-}
-
-/********************************************************
- *  mem_ok() - test used to see if timings are correct
- *             for a part. Helps in gussing which part
- *             we are currently using.
- *******************************************************/
-u32 mem_ok(void)
-{
-	u32 val1, val2;
-	u32 pattern = 0x12345678;
-
-	__raw_writel(0x0,OMAP2420_SDRC_CS0+0x400);   /* clear pos A */
-	__raw_writel(pattern, OMAP2420_SDRC_CS0);    /* pattern to pos B */
-	__raw_writel(0x0,OMAP2420_SDRC_CS0+4);       /* remove pattern off the bus */
-	val1 = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
-	val2 = __raw_readl(OMAP2420_SDRC_CS0);       /* get val2 */
-
-	if ((val1 != 0) || (val2 != pattern))        /* see if pos A value changed*/
-		return(0);
-	else
-		return(1);
-}
-
-
-/********************************************************
- *  sdrc_init() - init the sdrc chip selects CS0 and CS1
- *  - early init routines, called from flash or
- *  SRAM.
- *******************************************************/
-void sdrc_init(void)
-{
-	#define EARLY_INIT 1
-	do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT);  /* only init up first bank here */
-}
-
-/*************************************************************************
- * do_sdrc_init(): initialize the SDRAM for use.
- *  -called from low level code with stack only.
- *  -code sets up SDRAM timing and muxing for 2422 or 2420.
- *  -optimal settings can be placed here, or redone after i2c
- *      inspection of board info
- *
- *  This is a bit ugly, but should handle all memory moduels
- *   used with the H4. The first time though this code from s_init()
- *   we configure the first chip select.  Later on we come back and
- *   will configure the 2nd chip select if it exists.
- *
- **************************************************************************/
-void do_sdrc_init(u32 offset, u32 early)
-{
-	u32 cpu, dllen=0, rev, common=0, cs0=0, pmask=0, pass_type, mtype;
-	sdrc_data_t *sdata;	 /* do not change type */
-	u32 a, b, r;
-
-	static const sdrc_data_t sdrc_2422 =
-	{
-		H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0_DDR, 0 , H4_2422_SDRC_ACTIM_CTRLA_0,
-		H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL, H4_2422_SDRC_MR_0_DDR,
-		0, H4_2422_SDRC_DLLAB_CTRL
-	};
-	static const sdrc_data_t sdrc_2420 =
-	{
-		H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0_DDR, H4_2420_SDRC_MDCFG_0_SDR,
-		H4_2420_SDRC_ACTIM_CTRLA_0, H4_2420_SDRC_ACTIM_CTRLB_0,
-		H4_2420_SDRC_RFR_CTRL, H4_2420_SDRC_MR_0_DDR, H4_2420_SDRC_MR_0_SDR,
-		H4_2420_SDRC_DLLAB_CTRL
-	};
-
-	if (offset == SDRC_CS0_OSET)
-		cs0 = common = 1;  /* int regs shared between both chip select */
-
-	cpu = get_cpu_type();
-	rev = get_cpu_rev();
-
-	/* warning generated, though code generation is correct. this may bite later,
-	 * but is ok for now. there is only so much C code you can do on stack only
-	 * operation.
-	 */
-	if (cpu == CPU_2422){
-		sdata = (sdrc_data_t *)&sdrc_2422;
-		pass_type = STACKED;
-	} else{
-		sdata = (sdrc_data_t *)&sdrc_2420;
-		pass_type = IP_DDR;
-	}
-
-	__asm__ __volatile__("": : :"memory");  /* limit compiler scope */
-
-	if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) {
-		if(mtype == DDR_COMBO){
-			pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */
-			pass_type = COMBO_DDR; /* CS1 config */
-			__raw_writel((__raw_readl(SDRC_POWER)) & ~pmask, SDRC_POWER);
-		}
-		if(rev != CPU_2420_2422_ES1)	/* for es2 and above smooth things out */
-			make_cs1_contiguous();
-	}
-
-next_mem_type:
-	if (common) {	/* do a SDRC reset between types to clear regs*/
-		__raw_writel(SOFTRESET, SDRC_SYSCONFIG);	/* reset sdrc */
-		wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);/* wait till reset done set */
-		__raw_writel(0, SDRC_SYSCONFIG);		/* clear soft reset */
-		__raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
-#ifdef POWER_SAVE
-		__raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
-		__raw_writel(sdata->sdrc_sharing|SMART_IDLE, SDRC_SHARING);
-		__raw_writel((__raw_readl(SDRC_POWER)|BIT6), SDRC_POWER);
-#endif
-	}
-
-	if ((pass_type == IP_DDR) || (pass_type == STACKED)) /* (IP ddr-CS0),(2422-CS0/CS1) */
-		__raw_writel(sdata->sdrc_mdcfg_0_ddr, SDRC_MCFG_0+offset);
-	else if (pass_type == COMBO_DDR){ /* (combo-CS0/CS1) */
-		__raw_writel(H4_2420_COMBO_MDCFG_0_DDR,SDRC_MCFG_0+offset);
-	} else if (pass_type == IP_SDR){ /* ip sdr-CS0 */
-		__raw_writel(sdata->sdrc_mdcfg_0_sdr, SDRC_MCFG_0+offset);
-	}
-
-	a = sdata->sdrc_actim_ctrla_0;
-	b = sdata->sdrc_actim_ctrlb_0;
-	r = sdata->sdrc_dllab_ctrl;
-
-	/* work around ES1 DDR issues */
-	if((pass_type != IP_SDR) && (rev == CPU_2420_2422_ES1)){
-		a = H4_242x_SDRC_ACTIM_CTRLA_0_ES1;
-		b = H4_242x_SDRC_ACTIM_CTRLB_0_ES1;
-		r = H4_242x_SDRC_RFR_CTRL_ES1;
-	}
-
-	if (cs0) {
-		__raw_writel(a, SDRC_ACTIM_CTRLA_0);
-		__raw_writel(b, SDRC_ACTIM_CTRLB_0);
-	} else {
-		__raw_writel(a, SDRC_ACTIM_CTRLA_1);
-		__raw_writel(b, SDRC_ACTIM_CTRLB_1);
-	}
-	__raw_writel(r, SDRC_RFR_CTRL+offset);
-
-	/* init sequence for mDDR/mSDR using manual commands (DDR is a bit different) */
-	__raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
-	sdelay(5000);  /* susposed to be 100us per design spec for mddr/msdr */
-	__raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
-	__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
-	__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
-
-	/*
-	 * CSx SDRC Mode Register
-	 * Burst length = (4 - DDR) (2-SDR)
-	 * Serial mode
-	 * CAS latency = x
-	 */
-	if(pass_type == IP_SDR)
-		__raw_writel(sdata->sdrc_mr_0_sdr, SDRC_MR_0+offset);
-	else
-		__raw_writel(sdata->sdrc_mr_0_ddr, SDRC_MR_0+offset);
-
-	/* NOTE: ES1 242x _BUG_ DLL + External Bandwidth fix*/
-	if (rev == CPU_2420_2422_ES1){
-		dllen = (BIT0|BIT3); /* es1 clear both bit0 and bit3 */
-		__raw_writel((__raw_readl(SMS_CLASS_ARB0)|BURSTCOMPLETE_GROUP7)
-			,SMS_CLASS_ARB0);/* enable bust complete for lcd */
-	}
-	else
-		dllen = BIT0|BIT1; /* es2, clear bit0, and 1 (set phase to 72) */
-
-	/* enable & load up DLL with good value for 75MHz, and set phase to 90
-	 * ES1 recommends 90 phase, ES2 recommends 72 phase.
-	 */
-	if (common && (pass_type != IP_SDR)) {
-		__raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLA_CTRL);
-		__raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen), SDRC_DLLA_CTRL);
-		__raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLB_CTRL);
-		__raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen) , SDRC_DLLB_CTRL);
-	}
-	sdelay(90000);
-
-	if(mem_ok())
-		return; /* STACKED, other configued type */
-	++pass_type; /* IPDDR->COMBODDR->IPSDR for CS0 */
-	goto next_mem_type;
-}
-
-/*****************************************************
- * gpmc_init(): init gpmc bus
- * Init GPMC for x16, MuxMode (SDRAM in x32).
- * This code can only be executed from SRAM or SDRAM.
- *****************************************************/
-void gpmc_init(void)
-{
-	u32 mux=0, mtype, mwidth, rev, tval;
-
-	rev  = get_cpu_rev();
-	if (rev == CPU_2420_2422_ES1)
-		tval = 1;
-	else
-		tval = 0;  /* disable bit switched meaning */
-
-	/* global settings */
-	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
-	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
-	__raw_writel(tval, GPMC_TIMEOUT_CONTROL);/* timeout disable */
-#ifdef CONFIG_SYS_NAND_BOOT
-	__raw_writel(0x001, GPMC_CONFIG);	/* set nWP, disable limited addr */
-#else
-	__raw_writel(0x111, GPMC_CONFIG);	/* set nWP, disable limited addr */
-#endif
-
-	/* discover bus connection from sysboot */
-	if (is_gpmc_muxed() == GPMC_MUXED)
-		mux = BIT9;
-	mtype = get_gpmc0_type();
-	mwidth = get_gpmc0_width();
-
-	/* setup cs0 */
-	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
-	sdelay(1000);
-
-#ifdef CONFIG_SYS_NAND_BOOT
-	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mtype|mwidth, GPMC_CONFIG1_0);
-#else
-	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
-#endif
-
-#ifdef PRCM_CONFIG_III
-	__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
-#endif
-	__raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
-	__raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
-#ifdef PRCM_CONFIG_III
-	__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
-	__raw_writel(H4_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
-#endif
-	__raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
-	sdelay(2000);
-
-	/* setup cs1 */
-	__raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
-	sdelay(1000);
-	__raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
-	__raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
-	__raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
-	__raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
-	__raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
-	__raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
-	__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
-	sdelay(2000);
-}

+ 0 - 867
board/ti/omap2420h4/omap2420h4.c

@@ -1,867 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/mem.h>
-#include <i2c.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void wait_for_command_complete(unsigned int wd_base);
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init (void)
-{
-	gpmc_init(); /* in SRAM or SDRM, finish GPMC */
-
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4;		/* board id for linux */
-	gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100);	/* adress of boot parameters */
-
-	return 0;
-}
-
-/**********************************************************
- * Routine: try_unlock_sram()
- * Description: If chip is GP type, unlock the SRAM for
- *  general use.
- ***********************************************************/
-void try_unlock_sram(void)
-{
-	/* if GP device unlock device SRAM for general use */
-	if (get_device_type() == GP_DEVICE) {
-		__raw_writel(0xFF, A_REQINFOPERM0);
-		__raw_writel(0xCFDE, A_READPERM0);
-		__raw_writel(0xCFDE, A_WRITEPERM0);
-	}
-}
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called path is with sram stack.
- **********************************************************/
-void s_init(void)
-{
-	int in_sdram = running_in_sdram();
-
-	watchdog_init();
-	set_muxconf_regs();
-	delay(100);
-	try_unlock_sram();
-
-	if(!in_sdram)
-		prcm_init();
-
-	peripheral_enable();
-	icache_enable();
-	if (!in_sdram)
-		sdrc_init();
-}
-
-/*******************************************************
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- ********************************************************/
-int misc_init_r (void)
-{
-	ether_init(); /* better done here so timers are init'ed */
-	return(0);
-}
-
-/****************************************
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- *****************************************/
-void watchdog_init(void)
-{
-	/* There are 4 watch dogs.  1 secure, and 3 general purpose.
-	* The ROM takes care of the secure one. Of the 3 GP ones,
-	* 1 can reset us directly, the other 2 only generate MPU interrupts.
-	*/
-	__raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
-	wait_for_command_complete(WD2_BASE);
-	__raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
-
-#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
-	__raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
-	wait_for_command_complete(WD3_BASE);
-	__raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
-
-	__raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
-	wait_for_command_complete(WD4_BASE);
-	__raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
-#endif
-}
-
-/******************************************************
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- ******************************************************/
-void wait_for_command_complete(unsigned int wd_base)
-{
-	int pending = 1;
-	do {
-		pending = __raw_readl(wd_base+WWPS);
-	} while (pending);
-}
-
-/*******************************************************************
- * Routine:ether_init
- * Description: take the Ethernet controller out of reset and wait
- *		   for the EEPROM load to complete.
- ******************************************************************/
-void ether_init (void)
-{
-#ifdef CONFIG_LAN91C96
-	int cnt = 20;
-
-	__raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
-
-	__raw_writew(0x0, LAN_RESET_REGISTER);
-	do {
-		__raw_writew(0x1, LAN_RESET_REGISTER);
-		udelay (100);
-		if (cnt == 0)
-			goto h4reset_err_out;
-		--cnt;
-	} while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
-
-	cnt = 20;
-
-	do {
-		__raw_writew(0x0, LAN_RESET_REGISTER);
-		udelay (100);
-		if (cnt == 0)
-			goto h4reset_err_out;
-		--cnt;
-	} while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
-	udelay (1000);
-
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (1000);
-
-	h4reset_err_out:
-	return;
-#endif
-}
-
-/**********************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- **********************************************/
-int dram_init(void)
-{
-	unsigned int size0=0,size1=0;
-	u32 mtype, btype;
-	u8 chg_on = 0x5; /* enable charge of back up battery */
-	u8 vmode_on = 0x8C;
-	#define NOT_EARLY 0
-
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* need this a bit early */
-
-	btype = get_board_type();
-	mtype = get_mem_type();
-
-	display_board_info(btype);
-	if (btype == BOARD_H4_MENELAUS){
-		update_mux(btype,mtype); /* combo part on menelaus */
-		i2c_write(I2C_MENELAUS, 0x20, 1, &chg_on, 1); /*fix POR reset bug */
-		i2c_write(I2C_MENELAUS, 0x2, 1, &vmode_on, 1); /* VCORE change on VMODE */
-	}
-
-	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
-		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);	/* init other chip select */
-	}
-	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
-	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
-
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, size0 + size1);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	unsigned int size0, size1;
-	u32 rev;
-
-	rev = get_cpu_rev();
-	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
-	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
-
-	if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */
-		gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	else /* ES2 and above can remap at 32MB granularity */
-		gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
-	gd->bd->bi_dram[1].size = size1;
-
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = size0;
-}
-
-/**********************************************************
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers
- *              specific to the hardware
- *********************************************************/
-void set_muxconf_regs (void)
-{
-	muxSetupSDRC();
-	muxSetupGPMC();
-	muxSetupUsb0();
-	muxSetupUart3();
-	muxSetupI2C1();
-	muxSetupUART1();
-	muxSetupLCD();
-	muxSetupCamera();
-	muxSetupMMCSD();
-	muxSetupTouchScreen();
-	muxSetupHDQ();
-}
-
-/*****************************************************************
- * Routine: peripheral_enable
- * Description: Enable the clks & power for perifs (GPT2, UART1,...)
- ******************************************************************/
-void peripheral_enable(void)
-{
-	unsigned int v, if_clks=0, func_clks=0;
-
-	/* Enable GP2 timer.*/
-	if_clks |= BIT4;
-	func_clks |= BIT4;
-	v = __raw_readl(CM_CLKSEL2_CORE) | 0x4;	/* Sys_clk input OMAP2420_GPT2 */
-	__raw_writel(v, CM_CLKSEL2_CORE);
-	__raw_writel(0x1, CM_CLKSEL_WKUP);
-
-#ifdef CONFIG_SYS_NS16550
-	/* Enable UART1 clock */
-	func_clks |= BIT21;
-	if_clks |= BIT21;
-#endif
-	v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;	/* Interface clocks on */
-	__raw_writel(v,CM_ICLKEN1_CORE );
-	v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
-	__raw_writel(v, CM_FCLKEN1_CORE);
-	delay(1000);
-
-#ifndef KERNEL_UPDATED
-	{
-#define V1 0xffffffff
-#define V2 0x00000007
-
-		__raw_writel(V1, CM_FCLKEN1_CORE);
-		__raw_writel(V2, CM_FCLKEN2_CORE);
-		__raw_writel(V1, CM_ICLKEN1_CORE);
-		__raw_writel(V1, CM_ICLKEN2_CORE);
-	}
-#endif
-}
-
-/****************************************
- * Routine: muxSetupUsb0   (ostboot)
- * Description: Setup usb muxing
- *****************************************/
-void muxSetupUsb0(void)
-{
-	volatile uint8   *MuxConfigReg;
-	volatile uint32  *otgCtrlReg;
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	/* setup for USB VBus detection */
-	otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
-	*otgCtrlReg |= 0x00040000; /* bit 18 */
-}
-
-/****************************************
- * Routine: muxSetupUart3   (ostboot)
- * Description: Setup uart3 muxing
- *****************************************/
-void muxSetupUart3(void)
-{
-	volatile uint8 *MuxConfigReg;
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
-	*MuxConfigReg &= (uint8)(~0x1F);
-
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
-	*MuxConfigReg &= (uint8)(~0x1F);
-}
-
-/****************************************
- * Routine: muxSetupI2C1   (ostboot)
- * Description: Setup i2c muxing
- *****************************************/
-void muxSetupI2C1(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* I2C1 Clock pin configuration, PIN = M19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* I2C1 Data pin configuration, PIN = L15 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* Pull-up required on data line */
-	/* external pull-up already present. */
-	/* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
-}
-
-/****************************************
- * Routine: muxSetupUART1  (ostboot)
- * Description: Set up uart1 muxing
- *****************************************/
-void muxSetupUART1(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* UART1_CTS pin configuration, PIN = D21 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* UART1_RTS pin configuration, PIN = H21 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* UART1_TX pin configuration, PIN = L20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* UART1_RX pin configuration, PIN = T21 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupLCD   (ostboot)
- * Description: Setup lcd muxing
- *****************************************/
-void muxSetupLCD(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* LCD_D0 pin configuration, PIN = Y7  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D1 pin configuration, PIN = P10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D2 pin configuration, PIN = V8  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D3 pin configuration, PIN = Y8  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D4 pin configuration, PIN = W8  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D5 pin configuration, PIN = R10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D6 pin configuration, PIN = Y9  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D7 pin configuration, PIN = V9  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D8 pin configuration, PIN = W9  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D9 pin configuration, PIN = P11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D10 pin configuration, PIN = V10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D11 pin configuration, PIN = Y10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D12 pin configuration, PIN = W10 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D13 pin configuration, PIN = R11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D14 pin configuration, PIN = V11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D15 pin configuration, PIN = W11 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D16 pin configuration, PIN = P12 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_D17 pin configuration, PIN = R12 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_PCLK pin configuration,   PIN = W6   */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_VSYNC pin configuration,  PIN = V7  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_HSYNC pin configuration,  PIN = Y6  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* LCD_ACBIAS pin configuration, PIN = W7 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupCamera  (ostboot)
- * Description: Setup camera muxing
- *****************************************/
-void muxSetupCamera(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* CAMERA_RSTZ  pin configuration, PIN = Y16 */
-	/* CAM_RST is connected through the I2C IO expander.*/
-	/* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
-	/* *MuxConfigReg = 0x00 ; / * Mode = 0, PUPD=Disabled   */
-
-	/* CAMERA_XCLK  pin configuration, PIN = U3 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_LCLK  pin configuration, PIN = V5 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
-	*MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_VSYNC pin configuration, PIN = U2 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_HSYNC pin configuration, PIN = T3 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT0 pin configuration, PIN = T4 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT1 pin configuration, PIN = V2 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT2 pin configuration, PIN = V3 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT3 pin configuration, PIN = U4 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT4 pin configuration, PIN = W2 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT5 pin configuration, PIN = V4 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT6 pin configuration, PIN = W3 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT7 pin configuration, PIN = Y2 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT8 pin configuration, PIN = Y4 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* CAMERA_DAT9 pin configuration, PIN = V6 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupMMCSD (ostboot)
- * Description: set up MMC muxing
- *****************************************/
-void muxSetupMMCSD(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* SDMMC_CLKI pin configuration,  PIN = H15 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_CLKO pin configuration,  PIN = G19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_CMD pin configuration,   PIN = H18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT0 pin configuration,  PIN = F20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT1 pin configuration,  PIN = H14 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT2 pin configuration,  PIN = E19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DAT3 pin configuration,  PIN = D19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-	/* External pull-ups are present. */
-	/* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
-	/* SDMMC_DDIR0 pin configuration, PIN = F19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_DDIR1 pin configuration, PIN = E20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_DDIR2 pin configuration, PIN = F18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_DDIR3 pin configuration, PIN = E18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SDMMC_CDIR pin configuration,  PIN = G18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* MMC_CD pin configuration,      PIN = B3  ---2420IP ONLY---*/
-	/* MMC_CD for 2422IP=K1 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
-				   *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-
-	/* MMC_WP pin configuration,      PIN = B4  */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
-				   *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-}
-
-/******************************************
- * Routine: muxSetupTouchScreen (ostboot)
- * Description:  Set up touch screen muxing
- *******************************************/
-void muxSetupTouchScreen(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* SPI1_CLK pin configuration,  PIN = U18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SPI1_MOSI pin configuration, PIN = V20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SPI1_MISO pin configuration, PIN = T18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* SPI1_nCS0 pin configuration, PIN = U19 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
-	/* PEN_IRQ pin configuration,   PIN = P20 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
-				   *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupHDQ (ostboot)
- * Description: setup 1wire mux
- *****************************************/
-void muxSetupHDQ(void)
-{
-	volatile unsigned char  *MuxConfigReg;
-
-	/* HDQ_SIO pin configuration,  PIN = N18 */
-	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
-				   *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/***************************************************************
- * Routine: muxSetupGPMC (ostboot)
- * Description: Configures balls which cam up in protected mode
- ***************************************************************/
-void muxSetupGPMC(void)
-{
-	volatile uint8 *MuxConfigReg;
-	volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
-
-	/* gpmc_io_dir */
-	*MCR = 0x19000000;
-
-	/* NOR FLASH CS0 */
-	/* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
-				   *MuxConfigReg = 0x00 ;
-
-	/* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
-				   *MuxConfigReg = 0x01 ;
-
-	/* MPDB(Multi Port Debug Port) CS1 */
-	/* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
-				   *MuxConfigReg = 0x00 ;
-
-	/* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
-				   *MuxConfigReg = 0x00 ;
-}
-
-/****************************************************************
- * Routine: muxSetupSDRC  (ostboot)
- * Description: Configures balls which come up in protected mode
- ****************************************************************/
-void muxSetupSDRC(void)
-{
-	volatile uint8 *MuxConfigReg;
-
-	/* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
-				   *MuxConfigReg = 0x00 ;
-
-	/* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
-				   *MuxConfigReg = 0x00 ;
-
-	/* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3	Pull/up - N/A */
-	MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
-				   *MuxConfigReg = 0x00;
-
-	if (get_cpu_type() == CPU_2422) {
-		MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
-					   *MuxConfigReg = 0x1b;
-	}
-}
-
-/*****************************************************************************
- * Routine: update_mux()
- * Description: Update balls which are different beween boards.  All should be
- *              updated to match functionaly.  However, I'm only updating ones
- *              which I'll be using for now.  When power comes into play they
- *              all need updating.
- *****************************************************************************/
-void update_mux(u32 btype,u32 mtype)
-{
-	u32 cpu, base = OMAP2420_CTRL_BASE;
-	cpu = get_cpu_type();
-
-	if (btype == BOARD_H4_MENELAUS) {
-		if (cpu == CPU_2420) {
-			/* PIN = B3,  GPIO.0->KBR5,      mode 3,  (pun?),-DO-*/
-			__raw_writeb(0x3, base+0x30);
-			/* PIN = B13, GPIO.38->KBC6,     mode 3,  (pun?)-DO-*/
-			__raw_writeb(0x3, base+0xa3);
-			/* PIN = F1, GPIO.25->HSUSBxx    mode 3,  (for external HS USB)*/
-			/* PIN = H1, GPIO.26->HSUSBxx    mode 3,  (for external HS USB)*/
-			/* PIN = K1, GPMC_ncs6           mode 0,  (on board nand access)*/
-			/* PIN = L2, GPMC_ncs67          mode 0,  (for external HS USB)*/
-			/* PIN = M1 (HSUSBOTG) */
-			/* PIN = P1, GPIO.35->MEN_POK    mode 3,  (menelaus powerok)-DO-*/
-			__raw_writeb(0x3, base+0x9d);
-			/* PIN = U32, (WLAN_CLKREQ) */
-			/* PIN = Y11, WLAN */
-			/* PIN = AA4, GPIO.15->KBC2,     mode 3,  -DO- */
-			__raw_writeb(0x3, base+0xe7);
-			/* PIN = AA8, mDOC */
-			/* PIN = AA10, BT */
-			/* PIN = AA13, WLAN */
-			/* PIN = M18 GPIO.96->MMC2_WP    mode 3   -DO- */
-			__raw_writeb(0x3, base+0x10e);
-			/* PIN = N19 GPIO.98->WLAN_INT   mode 3   -DO- */
-			__raw_writeb(0x3, base+0x110);
-			/* PIN = J15 HHUSB */
-			/* PIN = H19 HSUSB */
-			/* PIN = W13, P13, R13, W16 ... */
-			/* PIN = V12 GPIO.25->I2C_CAMEN  mode 3   -DO- */
-			__raw_writeb(0x3, base+0xde);
-			/* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
-			__raw_writeb(0x0, base+0x12c);
-			/* PIN = AA17->sys_clkreq        mode 0   -DO- */
-			__raw_writeb(0x0, base+0x136);
-		} else if (cpu == CPU_2422) {
-			/* PIN = B3,  GPIO.0->nc,        mode 3,  set above (pun?)*/
-			/* PIN = B13, GPIO.cke1->nc,     mode 0,  set above, (pun?)*/
-			/* PIN = F1, GPIO.25->HSUSBxx    mode 3,  (for external HS USB)*/
-			/* PIN = H1, GPIO.26->HSUSBxx    mode 3,  (for external HS USB)*/
-			/* PIN = K1, GPMC_ncs6           mode 0,  (on board nand access)*/
-			__raw_writeb(0x0, base+0x92);
-			/* PIN = L2, GPMC_ncs67          mode 0,  (for external HS USB)*/
-			/* PIN = M1 (HSUSBOTG) */
-			/* PIN = P1, GPIO.35->MEN_POK    mode 3,  (menelaus powerok)-DO-*/
-			__raw_writeb(0x3, base+0x10c);
-			/* PIN = U32, (WLAN_CLKREQ) */
-			/* PIN = AA4, GPIO.15->KBC2,     mode 3,  -DO- */
-			__raw_writeb(0x3, base+0x30);
-			/* PIN = AA8, mDOC */
-			/* PIN = AA10, BT */
-			/* PIN = AA12, WLAN */
-			/* PIN = M18 GPIO.96->MMC2_WP    mode 3   -DO- */
-			__raw_writeb(0x3, base+0x10e);
-			/* PIN = N19 GPIO.98->WLAN_INT   mode 3   -DO- */
-			__raw_writeb(0x3, base+0x110);
-			/* PIN = J15 HHUSB */
-			/* PIN = H19 HSUSB */
-			/* PIN = W13, P13, R13, W16 ... */
-			/* PIN = V12 GPIO.25->I2C_CAMEN  mode 3   -DO- */
-			__raw_writeb(0x3, base+0xde);
-			/* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
-			__raw_writeb(0x0, base+0x12c);
-			/* PIN = AA17->sys_clkreq        mode 0   -DO- */
-			__raw_writeb(0x0, base+0x136);
-		}
-
-	} else if (btype == BOARD_H4_SDP) {
-		if (cpu == CPU_2420) {
-			/* PIN = B3,  GPIO.0->nc         mode 3,  set above (pun?)*/
-			/* PIN = B13, GPIO.cke1->nc,     mode 0,  set above, (pun?)*/
-			/* Pin = Y11 VLNQ */
-			/* Pin = AA4 VLNQ */
-			/* Pin = AA6 VLNQ */
-			/* Pin = AA8 VLNQ */
-			/* Pin = AA10 VLNQ */
-			/* Pin = AA12 VLNQ */
-			/* PIN = M18 GPIO.96->KBR5       mode 3   -DO- */
-			__raw_writeb(0x3, base+0x10e);
-			/* PIN = N19 GPIO.98->KBC6       mode 3   -DO- */
-			__raw_writeb(0x3, base+0x110);
-			/* PIN = J15 MDOC_nDMAREQ */
-			/* PIN = H19 GPIO.100->KBC2      mode 3   -DO- */
-			__raw_writeb(0x3, base+0x114);
-			/* PIN = W13, V12, P13, R13, W19, W16 ... */
-			/* PIN = AA17 sys_clkreq->bt_clk_req  mode 0  */
-		} else if (cpu == CPU_2422) {
-			/* PIN = B3,  GPIO.0->MMC_CD,    mode 3,  set above */
-			/* PIN = B13, GPIO.38->wlan_int, mode 3,  (pun?)*/
-			/* Pin = Y11 VLNQ */
-			/* Pin = AA4 VLNQ */
-			/* Pin = AA6 VLNQ */
-			/* Pin = AA8 VLNQ */
-			/* Pin = AA10 VLNQ */
-			/* Pin = AA12 VLNQ */
-			/* PIN = M18 GPIO.96->KBR5       mode 3   -DO- */
-			__raw_writeb(0x3, base+0x10e);
-			/* PIN = N19 GPIO.98->KBC6       mode 3   -DO- */
-			__raw_writeb(0x3, base+0x110);
-			/* PIN = J15 MDOC_nDMAREQ */
-			/* PIN = H19 GPIO.100->KBC2      mode 3   -DO- */
-			__raw_writeb(0x3, base+0x114);
-			/* PIN = W13, V12, P13, R13, W19, W16 ... */
-			/* PIN = AA17 sys_clkreq->bt_clk_req  mode 0 */
-		}
-	}
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_LAN91C96
-	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
-	return rc;
-}
-#endif

+ 0 - 387
board/ti/omap2420h4/sys_info.c

@@ -1,387 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mem.h>  /* get mem tables */
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <i2c.h>
-
-/**************************************************************************
- * get_prod_id() - get id info from chips
- ***************************************************************************/
-static u32 get_prod_id(void)
-{
-	u32 p;
-	p = __raw_readl(PRODUCTION_ID); /* get production ID */
-	return((p & CPU_242X_PID_MASK) >> 16);
-}
-
-/**************************************************************************
- * get_cpu_type() - low level get cpu type
- * - no C globals yet.
- * - just looking to say if this is a 2422 or 2420 or ...
- * - to start with we will look at switch settings..
- * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
- *   (mux for 2420, non-mux for 2422).
- ***************************************************************************/
-u32 get_cpu_type(void)
-{
-	u32 v;
-
-	switch(get_prod_id()){
-		case 1:;/* 2420 */
-		case 2: return(CPU_2420); break; /* 2420 pop */
-		case 4: return(CPU_2422); break;
-		case 8: return(CPU_2423); break;
-		default: break;  /* early 2420/2422's unmarked */
-	}
-
-	v = __raw_readl(TAP_IDCODE_REG);
-	v &= CPU_24XX_ID_MASK;
-	if (v == CPU_2420_CHIPID) {	  /* currently 2420 and 2422 have same id */
-		if (is_gpmc_muxed() == GPMC_MUXED)	  /* if mux'ed */
-			return(CPU_2420);
-		else
-			return(CPU_2422);
-	} else
-		return(CPU_2420); /* don't know, say 2420 */
-}
-
-/******************************************
- * get_cpu_rev(void) - extract version info
- ******************************************/
-u32 get_cpu_rev(void)
-{
-	u32 v;
-	v = __raw_readl(TAP_IDCODE_REG);
-	v = v >> 28;
-	return(v+1);  /* currently 2422 and 2420 match up */
-}
-/****************************************************
- * is_mem_sdr() - return 1 if mem type in use is SDR
- ****************************************************/
-u32 is_mem_sdr(void)
-{
-	volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
-	if(*burst == H4_2420_SDRC_MR_0_SDR)
-		return(1);
-	return(0);
-}
-
-/***********************************************************
- * get_mem_type() - identify type of mDDR part used.
- * 2422 uses stacked DDR, 2 parts CS0/CS1.
- * 2420 may have 1 or 2, no good way to know...only init 1...
- * when eeprom data is up we can select 1 more.
- *************************************************************/
-u32 get_mem_type(void)
-{
-	u32 cpu, sdr = is_mem_sdr();
-
-	cpu = get_cpu_type();
-	if (cpu == CPU_2422 || cpu == CPU_2423)
-		return(DDR_STACKED);
-
-	if(get_prod_id() == 0x2)
-		return(XDR_POP);
-
-	if (get_board_type() == BOARD_H4_MENELAUS)
-		if(sdr)
-			return(SDR_DISCRETE);
-		else
-			return(DDR_COMBO);
-	else
-		if(sdr) /* SDP + SDR kit */
-			return(SDR_DISCRETE);
-		else
-			return(DDR_DISCRETE); /* origional SDP */
-}
-
-/***********************************************************************
- * get_cs0_size() - get size of chip select 0/1
- ************************************************************************/
-u32 get_sdr_cs_size(u32 offset)
-{
-	u32 size;
-	size = __raw_readl(SDRC_MCFG_0+offset) >> 8; /* get ram size field */
-	size &= 0x2FF;   /* remove unwanted bits */
-	size *= SZ_2M;   /* find size in MB */
-	return(size);
-}
-
-/***********************************************************************
- * get_board_type() - get board type based on current production stats.
- *  --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
- *      when they are available we can get info from there.  This should
- *      be correct of all known boards up until today.
- ************************************************************************/
-u32 get_board_type(void)
-{
-	if (i2c_probe(I2C_MENELAUS) == 0)
-		return(BOARD_H4_MENELAUS);
-	else
-		return(BOARD_H4_SDP);
-}
-
-/******************************************************************
- * get_sysboot_value() - get init word settings (dip switch on h4)
- ******************************************************************/
-inline u32 get_sysboot_value(void)
-{
-	return(0x00000FFF & __raw_readl(CONTROL_STATUS));
-}
-
-/***************************************************************************
- *  get_gpmc0_base() - Return current address hardware will be
- *     fetching from. The below effectively gives what is correct, its a bit
- *   mis-leading compared to the TRM.  For the most general case the mask
- *   needs to be also taken into account this does work in practice.
- *   - for u-boot we currently map:
- *       -- 0 to nothing,
- *       -- 4 to flash
- *       -- 8 to enent
- *       -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
-	u32 b;
-
-	b = __raw_readl(GPMC_CONFIG7_0);
-	b &= 0x1F;	 /* keep base [5:0] */
-	b = b << 24; /* ret 0x0b000000 */
-	return(b);
-}
-
-/*****************************************************************
- *  is_gpmc_muxed() - tells if address/data lines are multiplexed
- *****************************************************************/
-u32 is_gpmc_muxed(void)
-{
-	u32 mux;
-	mux = get_sysboot_value();
-	if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
-		return(GPMC_MUXED); /* NAND Boot mode */
-	if (mux & BIT1)	   /* if mux'ed */
-		return(GPMC_MUXED);
-	else
-		return(GPMC_NONMUXED);
-}
-
-/************************************************************************
- *  get_gpmc0_type() - read sysboot lines to see type of memory attached
- ************************************************************************/
-u32 get_gpmc0_type(void)
-{
-	u32 type;
-	type = get_sysboot_value();
-	if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
-		return(TYPE_NAND);
-	else
-		return(TYPE_NOR);
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
-	u32 width;
-	width = get_sysboot_value();
-	if ((width & 0xF) == (BIT3|BIT2))
-		return(WIDTH_8BIT);
-	else
-		return(WIDTH_16BIT);
-}
-
-/*********************************************************************
- * wait_on_value() - common routine to allow waiting for changes in
- *   volatile regs.
- *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-{
-	u32 i = 0, val;
-	do {
-		++i;
-		val = __raw_readl(read_addr) & read_bit_mask;
-		if (val == match_value)
-			return(1);
-		if (i==bound)
-			return(0);
-	} while (1);
-}
-
-/*********************************************************************
- *  display_board_info() - print banner with board info.
- *********************************************************************/
-void display_board_info(u32 btype)
-{
-	static const char cpu_2420 [] = "2420";   /* cpu type */
-	static const char cpu_2422 [] = "2422";
-	static const char cpu_2423 [] = "2423";
-	static const char db_men [] = "Menelaus"; /* board type */
-	static const char db_ip [] = "IP";
-	static const char mem_sdr [] = "mSDR";    /* memory type */
-	static const char mem_ddr [] = "mDDR";
-	static const char t_tst [] = "TST";	    /* security level */
-	static const char t_emu [] = "EMU";
-	static const char t_hs [] = "HS";
-	static const char t_gp [] = "GP";
-	static const char unk [] = "?";
-
-	const char *cpu_s, *db_s, *mem_s, *sec_s;
-	u32 cpu, rev, sec;
-
-	rev = get_cpu_rev();
-	cpu = get_cpu_type();
-	sec = get_device_type();
-
-	if(is_mem_sdr())
-		mem_s = mem_sdr;
-	else
-		mem_s = mem_ddr;
-
-	if(cpu == CPU_2423)
-		cpu_s = cpu_2423;
-	else if (cpu == CPU_2422)
-		cpu_s = cpu_2422;
-	else
-		cpu_s = cpu_2420;
-
-	if(btype ==  BOARD_H4_MENELAUS)
-		db_s = db_men;
-	else
-		db_s = db_ip;
-
-	switch(sec){
-		case TST_DEVICE: sec_s = t_tst; break;
-		case EMU_DEVICE: sec_s = t_emu; break;
-		case HS_DEVICE:  sec_s = t_hs; break;
-		case GP_DEVICE:  sec_s = t_gp; break;
-		default: sec_s = unk;
-	}
-
-	printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev-1);
-	printf("TI H4 SDP Base Board + %s Daughter Board + %s \n", db_s, mem_s);
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- *          0 = 242x IP platform (first 2xx boards)
- *          1 = 242x Menelaus platfrom.
- *************************************************************************/
-u32 get_board_rev(void)
-{
-	u32 rev = 0;
-	u32 btype = get_board_type();
-
-	if (btype == BOARD_H4_MENELAUS){
-		rev = 1;
-	}
-	return(rev);
-}
-
-/********************************************************
- *  get_base(); get upper addr of current execution
- *******************************************************/
-u32 get_base(void)
-{
-	u32  val;
-	__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
-	val &= 0xF0000000;
-	val >>= 28;
-	return(val);
-}
-
-/********************************************************
- *  get_base2(); get 2upper addr of current execution
- *******************************************************/
-u32 get_base2(void)
-{
-	u32  val;
-	__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
-	val &= 0xFF000000;
-	val >>= 24;
-	return(val);
-}
-
-/********************************************************
- *  running_in_flash() - tell if currently running in
- *   flash.
- *******************************************************/
-u32 running_in_flash(void)
-{
-	if (get_base() < 4)
-		return(1);  /* in flash */
-	return(0); /* running in SRAM or SDRAM */
-}
-
-/********************************************************
- *  running_in_sram() - tell if currently running in
- *   sram.
- *******************************************************/
-u32 running_in_sram(void)
-{
-	if (get_base() == 4)
-		return(1);  /* in SRAM */
-	return(0); /* running in FLASH or SDRAM */
-}
-/********************************************************
- *  running_in_sdram() - tell if currently running in
- *   flash.
- *******************************************************/
-u32 running_in_sdram(void)
-{
-	if (get_base() > 4)
-		return(1);  /* in sdram */
-	return(0); /* running in SRAM or FLASH */
-}
-
-/*************************************************************
- *  running_from_internal_boot() - am I a signed NOR image.
- *************************************************************/
-u32 running_from_internal_boot(void)
-{
-	u32 v, base;
-
-	v = get_sysboot_value() & BIT3;
-	base = get_base2();
-	/* if running at mask rom flash address and
-	 * sysboot3 says this was an internal boot
-	 */
-	if ((base == 0x08) && v)
-		return(1);
-	else
-		return(0);
-}
-
-/*************************************************************
- *  get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
-	int mode;
-	mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8);
-	return(mode >>= 8);
-}

+ 8 - 4
board/ti/omap5_uevm/evm.c

@@ -71,22 +71,26 @@ int misc_init_r(void)
 
 void set_muxconf_regs_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
 		   sizeof(core_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
 		   sizeof(wkup_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 }
 
 void set_muxconf_regs_non_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_non_essential,
 		   sizeof(core_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 }

+ 13 - 9
board/ti/panda/panda.c

@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/gpio.h>
 #include <asm/gpio.h>
 
@@ -139,16 +139,18 @@ int misc_init_r(void)
 
 void set_muxconf_regs_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
 		   sizeof(core_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
 		   sizeof(wkup_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() >= OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 				 wkup_padconf_array_essential_4460,
 				 sizeof(wkup_padconf_array_essential_4460) /
 				 sizeof(struct pad_conf_entry));
@@ -156,27 +158,29 @@ void set_muxconf_regs_essential(void)
 
 void set_muxconf_regs_non_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_non_essential,
 		   sizeof(core_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() < OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_CORE,
+		do_set_mux((*ctrl)->control_padconf_core_base,
 				core_padconf_array_non_essential_4430,
 				sizeof(core_padconf_array_non_essential_4430) /
 				sizeof(struct pad_conf_entry));
 	else
-		do_set_mux(CONTROL_PADCONF_CORE,
+		do_set_mux((*ctrl)->control_padconf_core_base,
 				core_padconf_array_non_essential_4460,
 				sizeof(core_padconf_array_non_essential_4460) /
 				sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() < OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 				wkup_padconf_array_non_essential_4430,
 				sizeof(wkup_padconf_array_non_essential_4430) /
 				sizeof(struct pad_conf_entry));

+ 10 - 6
board/ti/sdp4430/sdp.c

@@ -72,16 +72,18 @@ int misc_init_r(void)
 
 void set_muxconf_regs_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_essential,
 		   sizeof(core_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_essential,
 		   sizeof(wkup_padconf_array_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() >= OMAP4460_ES1_0)
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 				 wkup_padconf_array_essential_4460,
 				 sizeof(wkup_padconf_array_essential_4460) /
 				 sizeof(struct pad_conf_entry));
@@ -89,16 +91,18 @@ void set_muxconf_regs_essential(void)
 
 void set_muxconf_regs_non_essential(void)
 {
-	do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_core_base,
+		   core_padconf_array_non_essential,
 		   sizeof(core_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
-	do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+	do_set_mux((*ctrl)->control_padconf_wkup_base,
+		   wkup_padconf_array_non_essential,
 		   sizeof(wkup_padconf_array_non_essential) /
 		   sizeof(struct pad_conf_entry));
 
 	if (omap_revision() < OMAP4460_ES1_0) {
-		do_set_mux(CONTROL_PADCONF_WKUP,
+		do_set_mux((*ctrl)->control_padconf_wkup_base,
 			wkup_padconf_array_non_essential_4430,
 			sizeof(wkup_padconf_array_non_essential_4430) /
 			sizeof(struct pad_conf_entry));

+ 2 - 2
board/wandboard/README

@@ -14,12 +14,12 @@ Building U-boot for Wandboard
 
 To build U-Boot for the Wandboard Dual Lite version:
 
-$ make wanboard_dl_config
+$ make wandboard_dl_config
 $ make
 
 To build U-Boot for the Wandboard Solo version:
 
-$ make wanboard_solo_config
+$ make wandboard_solo_config
 $ make
 
 Flashing U-boot into the SD card

+ 98 - 0
board/wandboard/wandboard.c

@@ -10,9 +10,11 @@
  */
 
 #include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/mx6-pins.h>
+#include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
@@ -21,9 +23,11 @@
 #include <asm/sizes.h>
 #include <common.h>
 #include <fsl_esdhc.h>
+#include <ipu_pixfmt.h>
 #include <mmc.h>
 #include <miiphy.h>
 #include <netdev.h>
+#include <linux/fb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -206,6 +210,88 @@ int board_phy_config(struct phy_device *phydev)
 	return 0;
 }
 
+#if defined(CONFIG_VIDEO_IPUV3)
+static void enable_hdmi(void)
+{
+	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	u8 reg;
+	reg = readb(&hdmi->phy_conf0);
+	reg |= HDMI_PHY_CONF0_PDZ_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	udelay(3000);
+	reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
+	writeb(reg, &hdmi->phy_conf0);
+	writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
+}
+
+static struct fb_videomode const hdmi = {
+	.name           = "HDMI",
+	.refresh        = 60,
+	.xres           = 1024,
+	.yres           = 768,
+	.pixclock       = 15385,
+	.left_margin    = 220,
+	.right_margin   = 40,
+	.upper_margin   = 21,
+	.lower_margin   = 7,
+	.hsync_len      = 60,
+	.vsync_len      = 10,
+	.sync           = FB_SYNC_EXT,
+	.vmode          = FB_VMODE_NONINTERLACED
+};
+
+int board_video_skip(void)
+{
+	int ret;
+
+	ret = ipuv3_fb_init(&hdmi, 0, IPU_PIX_FMT_RGB24);
+
+	if (ret)
+		printf("HDMI cannot be configured: %d\n", ret);
+
+	enable_hdmi();
+
+	return ret;
+}
+
+static void setup_display(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	int reg;
+
+	/* Turn on IPU clock */
+	reg = readl(&mxc_ccm->CCGR3);
+	reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET;
+	writel(reg, &mxc_ccm->CCGR3);
+
+	/* Turn on HDMI PHY clock */
+	reg = readl(&mxc_ccm->CCGR2);
+	reg |=  MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK
+		| MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
+	writel(reg, &mxc_ccm->CCGR2);
+
+	/* clear HDMI PHY reset */
+	writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
+
+	reg = readl(&mxc_ccm->chsccdr);
+	reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
+		| MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
+		| MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+	reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+		<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+	      | (CHSCCDR_PODF_DIVIDE_BY_3
+		<< MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+	      | (CHSCCDR_IPU_PRE_CLK_540M_PFD
+		<< MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+	writel(reg, &mxc_ccm->chsccdr);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
 int board_eth_init(bd_t *bis)
 {
 	int ret;
@@ -222,9 +308,21 @@ int board_eth_init(bd_t *bis)
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
+#if defined(CONFIG_VIDEO_IPUV3)
+	setup_display();
+#endif
 	return 0;
 }
 
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
 #ifdef CONFIG_CMD_BMODE
 static const struct boot_mode board_boot_modes[] = {
 	/* 4 bit bus width */

+ 3 - 1
boards.cfg

@@ -52,7 +52,6 @@ flea3                        arm         arm1136     -                   CarMedi
 mx35pdk                      arm         arm1136     -                   freescale      mx35
 woodburn                     arm         arm1136     -                   -              mx35
 woodburn_sd                  arm         arm1136     woodburn            -              mx35        woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg
-omap2420h4                   arm         arm1136     -                   ti             omap24xx
 tnetv107x_evm                arm         arm1176     tnetv107xevm        ti             tnetv107x
 rpi_b                        arm         arm1176     rpi_b               raspberrypi    bcm2835
 integratorap_cm720t          arm         arm720t     integrator          armltd         -           integratorap:CM720T
@@ -266,12 +265,14 @@ mx53loco                     arm         armv7       mx53loco            freesca
 mx53smd                      arm         armv7       mx53smd             freescale      mx5		mx53smd:IMX_CONFIG=board/freescale/mx53smd/imximage.cfg
 ima3-mx53                    arm         armv7       ima3-mx53           esg            mx5		ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg
 vision2                      arm         armv7       vision2             ttcontrol      mx5		vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg
+cgtqmx6qeval				 arm		 armv7		 cgtqmx6eval		 congatec		mx6		cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
 mx6qarm2                     arm         armv7       mx6qarm2            freescale      mx6		mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
 mx6qsabreauto                arm         armv7       mx6qsabreauto       freescale      mx6		mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
 mx6qsabrelite                arm         armv7       mx6qsabrelite       freescale      mx6		mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
 mx6qsabresd                  arm         armv7       mx6qsabresd         freescale      mx6		mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
 mx6slevk                     arm         armv7       mx6slevk            freescale      mx6		mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
 titanium                     arm         armv7       titanium            freescale      mx6		titanium:IMX_CONFIG=board/freescale/titanium/imximage.cfg
+vf610twr                     arm         armv7       vf610twr            freescale      vf610		vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg
 eco5pk                       arm         armv7       eco5pk              8dtech         omap3
 nitrogen6dl                  arm         armv7       nitrogen6x          boundary       mx6		nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
 nitrogen6dl2g                arm         armv7       nitrogen6x          boundary       mx6		nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048
@@ -347,6 +348,7 @@ pdnb3                        arm         ixp         pdnb3               prodriv
 scpu                         arm         ixp         pdnb3               prodrive       -           pdnb3:SCPU
 balloon3                     arm         pxa
 h2200                        arm         pxa
+lp8x4x                       arm         pxa         lp8x4x              icpdas
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa

+ 1 - 0
doc/README.mxc_ocotp

@@ -2,6 +2,7 @@ Driver implementing the fuse API for Freescale's On-Chip OTP Controller (OCOTP)
 on MXC
 
 This IP can be found on the following SoCs:
+ - Vybrid VF610,
  - i.MX6.
 
 Note that this IP is different from albeit similar to the IPs of the same name

+ 1 - 0
doc/README.scrapyard

@@ -96,3 +96,4 @@ R5200            ColdFire    -              48ead7a     2008-03-31  Zachary P. L
 CPCI440          powerpc     440GP          b568fd2     2007-12-27  Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 PCIPPC2          powerpc     MPC740/MPC750  7c9e89b     2013-02-07  Wolfgang Denk <wd@denx.de>
 PCIPPC6	powerpc	MPC740/MPC750 -	  -		Wolfgang Denk <wd@denx.de>
+omap2420h4       arm         omap24xx       -           2013-06-04  Richard Woodruff <r-woodruff2@ti.com>

+ 10 - 0
doc/README.vf610

@@ -0,0 +1,10 @@
+U-Boot for Freescale Vybrid VF610
+
+This file contains information for the port of U-Boot to the Freescale Vybrid
+VF610 SoC.
+
+1. CONVENTIONS FOR FUSE ASSIGNMENTS
+-----------------------------------
+
+1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in word 2 and the
+    32 lsbs in word 3.

+ 299 - 191
drivers/i2c/omap24xx_i2c.c

@@ -18,6 +18,20 @@
  *
  * Adapted for OMAP2420 I2C, r-woodruff2@ti.com
  *
+ * Copyright (c) 2013 Lubomir Popov <lpopov@mm-sol.com>, MM Solutions
+ * New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4
+ * (4430/60/70), OMAP5 (5430) and AM335X (3359); should work on older
+ * OMAPs and derivatives as well. The only anticipated exception would
+ * be the OMAP2420, which shall require driver modification.
+ * - Rewritten i2c_read to operate correctly with all types of chips
+ *   (old function could not read consistent data from some I2C slaves).
+ * - Optimized i2c_write.
+ * - New i2c_probe, performs write access vs read. The old probe could
+ *   hang the system under certain conditions (e.g. unconfigured pads).
+ * - The read/write/probe functions try to identify unconfigured bus.
+ * - Status functions now read irqstatus_raw as per TRM guidelines
+ *   (except for OMAP243X and OMAP34XX).
+ * - Driver now supports up to I2C5 (OMAP5).
  */
 
 #include <common.h>
@@ -31,8 +45,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define I2C_TIMEOUT	1000
 
+/* Absolutely safe for status update at 100 kHz I2C: */
+#define I2C_WAIT	200
+
 static int wait_for_bb(void);
-static u16 wait_for_pin(void);
+static u16 wait_for_event(void);
 static void flush_fifo(void);
 
 /*
@@ -137,10 +154,14 @@ void i2c_init(int speed, int slaveadd)
 	/* own address */
 	writew(slaveadd, &i2c_base->oa);
 	writew(I2C_CON_EN, &i2c_base->con);
-
-	/* have to enable intrrupts or OMAP i2c module doesn't work */
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+	/*
+	 * Have to enable interrupts for OMAP2/3, these IPs don't have
+	 * an 'irqstatus_raw' register and we shall have to poll 'stat'
+	 */
 	writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
-		I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+	       I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+#endif
 	udelay(1000);
 	flush_fifo();
 	writew(0xFFFF, &i2c_base->stat);
@@ -150,88 +171,6 @@ void i2c_init(int speed, int slaveadd)
 		bus_initialized[current_bus] = 1;
 }
 
-static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value)
-{
-	int i2c_error = 0;
-	u16 status;
-	int i = 2 - alen;
-	u8 tmpbuf[2] = {(regoffset) >> 8, regoffset & 0xff};
-	u16 w;
-
-	/* wait until bus not busy */
-	if (wait_for_bb())
-		return 1;
-
-	/* one byte only */
-	writew(alen, &i2c_base->cnt);
-	/* set slave address */
-	writew(devaddr, &i2c_base->sa);
-	/* no stop bit needed here */
-	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
-	      I2C_CON_TRX, &i2c_base->con);
-
-	/* send register offset */
-	while (1) {
-		status = wait_for_pin();
-		if (status == 0 || status & I2C_STAT_NACK) {
-			i2c_error = 1;
-			goto read_exit;
-		}
-		if (status & I2C_STAT_XRDY) {
-			w = tmpbuf[i++];
-#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
-	defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
-	defined(CONFIG_OMAP54XX))
-			w |= tmpbuf[i++] << 8;
-#endif
-			writew(w, &i2c_base->data);
-			writew(I2C_STAT_XRDY, &i2c_base->stat);
-		}
-		if (status & I2C_STAT_ARDY) {
-			writew(I2C_STAT_ARDY, &i2c_base->stat);
-			break;
-		}
-	}
-
-	/* set slave address */
-	writew(devaddr, &i2c_base->sa);
-	/* read one byte from slave */
-	writew(1, &i2c_base->cnt);
-	/* need stop bit here */
-	writew(I2C_CON_EN | I2C_CON_MST |
-		I2C_CON_STT | I2C_CON_STP,
-		&i2c_base->con);
-
-	/* receive data */
-	while (1) {
-		status = wait_for_pin();
-		if (status == 0 || status & I2C_STAT_NACK) {
-			i2c_error = 1;
-			goto read_exit;
-		}
-		if (status & I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
-	defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
-	defined(CONFIG_OMAP54XX)
-			*value = readb(&i2c_base->data);
-#else
-			*value = readw(&i2c_base->data);
-#endif
-			writew(I2C_STAT_RRDY, &i2c_base->stat);
-		}
-		if (status & I2C_STAT_ARDY) {
-			writew(I2C_STAT_ARDY, &i2c_base->stat);
-			break;
-		}
-	}
-
-read_exit:
-	flush_fifo();
-	writew(0xFFFF, &i2c_base->stat);
-	writew(0, &i2c_base->cnt);
-	return i2c_error;
-}
-
 static void flush_fifo(void)
 {	u16 stat;
 
@@ -241,13 +180,7 @@ static void flush_fifo(void)
 	while (1) {
 		stat = readw(&i2c_base->stat);
 		if (stat == I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
-	defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
-	defined(CONFIG_OMAP54XX)
 			readb(&i2c_base->data);
-#else
-			readw(&i2c_base->data);
-#endif
 			writew(I2C_STAT_RRDY, &i2c_base->stat);
 			udelay(1000);
 		} else
@@ -255,6 +188,10 @@ static void flush_fifo(void)
 	}
 }
 
+/*
+ * i2c_probe: Use write access. Allows to identify addresses that are
+ *            write-only (like the config register of dual-port EEPROMs)
+ */
 int i2c_probe(uchar chip)
 {
 	u16 status;
@@ -263,61 +200,81 @@ int i2c_probe(uchar chip)
 	if (chip == readw(&i2c_base->oa))
 		return res;
 
-	/* wait until bus not busy */
+	/* Wait until bus is free */
 	if (wait_for_bb())
 		return res;
 
-	/* try to read one byte */
-	writew(1, &i2c_base->cnt);
-	/* set slave address */
+	/* No data transfer, slave addr only */
+	writew(0, &i2c_base->cnt);
+	/* Set slave address */
 	writew(chip, &i2c_base->sa);
-	/* stop bit needed here */
-	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con);
-
-	while (1) {
-		status = wait_for_pin();
-		if (status == 0 || status & I2C_STAT_AL) {
-			res = 1;
-			goto probe_exit;
-		}
-		if (status & I2C_STAT_NACK) {
-			res = 1;
-			writew(0xff, &i2c_base->stat);
-			writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con);
-
-			if (wait_for_bb())
-				res = 1;
-
-			break;
-		}
-		if (status & I2C_STAT_ARDY) {
-			writew(I2C_STAT_ARDY, &i2c_base->stat);
-			break;
-		}
-		if (status & I2C_STAT_RRDY) {
-			res = 0;
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
-	defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
-	defined(CONFIG_OMAP54XX)
-			readb(&i2c_base->data);
-#else
-			readw(&i2c_base->data);
-#endif
-			writew(I2C_STAT_RRDY, &i2c_base->stat);
-		}
+	/* Stop bit needed here */
+	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+	       I2C_CON_STP, &i2c_base->con);
+
+	status = wait_for_event();
+
+	if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
+		/*
+		 * With current high-level command implementation, notifying
+		 * the user shall flood the console with 127 messages. If
+		 * silent exit is desired upon unconfigured bus, remove the
+		 * following 'if' section:
+		 */
+		if (status == I2C_STAT_XRDY)
+			printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
+			       current_bus, status);
+
+		goto pr_exit;
 	}
 
-probe_exit:
+	/* Check for ACK (!NAK) */
+	if (!(status & I2C_STAT_NACK)) {
+		res = 0;			/* Device found */
+		udelay(I2C_WAIT);		/* Required by AM335X in SPL */
+		/* Abort transfer (force idle state) */
+		writew(I2C_CON_MST | I2C_CON_TRX, &i2c_base->con); /* Reset */
+		udelay(1000);
+		writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_TRX |
+		       I2C_CON_STP, &i2c_base->con);		/* STP */
+	}
+pr_exit:
 	flush_fifo();
-	/* don't allow any more data in... we don't want it. */
-	writew(0, &i2c_base->cnt);
 	writew(0xFFFF, &i2c_base->stat);
+	writew(0, &i2c_base->cnt);
 	return res;
 }
 
+/*
+ * i2c_read: Function now uses a single I2C read transaction with bulk transfer
+ *           of the requested number of bytes (note that the 'i2c md' command
+ *           limits this to 16 bytes anyway). If CONFIG_I2C_REPEATED_START is
+ *           defined in the board config header, this transaction shall be with
+ *           Repeated Start (Sr) between the address and data phases; otherwise
+ *           Stop-Start (P-S) shall be used (some I2C chips do require a P-S).
+ *           The address (reg offset) may be 0, 1 or 2 bytes long.
+ *           Function now reads correctly from chips that return more than one
+ *           byte of data per addressed register (like TI temperature sensors),
+ *           or that do not need a register address at all (such as some clock
+ *           distributors).
+ */
 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
-	int i;
+	int i2c_error = 0;
+	u16 status;
+
+	if (alen < 0) {
+		puts("I2C read: addr len < 0\n");
+		return 1;
+	}
+	if (len < 0) {
+		puts("I2C read: data len < 0\n");
+		return 1;
+	}
+	if (buffer == NULL) {
+		puts("I2C read: NULL pointer passed\n");
+		return 1;
+	}
 
 	if (alen > 2) {
 		printf("I2C read: addr len %d not supported\n", alen);
@@ -329,24 +286,122 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 		return 1;
 	}
 
-	for (i = 0; i < len; i++) {
-		if (i2c_read_byte(chip, addr + i, alen, &buffer[i])) {
-			puts("I2C read: I/O error\n");
-			i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-			return 1;
+	/* Wait until bus not busy */
+	if (wait_for_bb())
+		return 1;
+
+	/* Zero, one or two bytes reg address (offset) */
+	writew(alen, &i2c_base->cnt);
+	/* Set slave address */
+	writew(chip, &i2c_base->sa);
+
+	if (alen) {
+		/* Must write reg offset first */
+#ifdef CONFIG_I2C_REPEATED_START
+		/* No stop bit, use Repeated Start (Sr) */
+		writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
+		       I2C_CON_TRX, &i2c_base->con);
+#else
+		/* Stop - Start (P-S) */
+		writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP |
+		       I2C_CON_TRX, &i2c_base->con);
+#endif
+		/* Send register offset */
+		while (1) {
+			status = wait_for_event();
+			/* Try to identify bus that is not padconf'd for I2C */
+			if (status == I2C_STAT_XRDY) {
+				i2c_error = 2;
+				printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
+				       current_bus, status);
+				goto rd_exit;
+			}
+			if (status == 0 || status & I2C_STAT_NACK) {
+				i2c_error = 1;
+				printf("i2c_read: error waiting for addr ACK (status=0x%x)\n",
+				       status);
+				goto rd_exit;
+			}
+			if (alen) {
+				if (status & I2C_STAT_XRDY) {
+					alen--;
+					/* Do we have to use byte access? */
+					writeb((addr >> (8 * alen)) & 0xff,
+					       &i2c_base->data);
+					writew(I2C_STAT_XRDY, &i2c_base->stat);
+				}
+			}
+			if (status & I2C_STAT_ARDY) {
+				writew(I2C_STAT_ARDY, &i2c_base->stat);
+				break;
+			}
 		}
 	}
+	/* Set slave address */
+	writew(chip, &i2c_base->sa);
+	/* Read len bytes from slave */
+	writew(len, &i2c_base->cnt);
+	/* Need stop bit here */
+	writew(I2C_CON_EN | I2C_CON_MST |
+	       I2C_CON_STT | I2C_CON_STP,
+	       &i2c_base->con);
 
-	return 0;
+	/* Receive data */
+	while (1) {
+		status = wait_for_event();
+		/*
+		 * Try to identify bus that is not padconf'd for I2C. This
+		 * state could be left over from previous transactions if
+		 * the address phase is skipped due to alen=0.
+		 */
+		if (status == I2C_STAT_XRDY) {
+			i2c_error = 2;
+			printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
+			       current_bus, status);
+			goto rd_exit;
+		}
+		if (status == 0 || status & I2C_STAT_NACK) {
+			i2c_error = 1;
+			goto rd_exit;
+		}
+		if (status & I2C_STAT_RRDY) {
+			*buffer++ = readb(&i2c_base->data);
+			writew(I2C_STAT_RRDY, &i2c_base->stat);
+		}
+		if (status & I2C_STAT_ARDY) {
+			writew(I2C_STAT_ARDY, &i2c_base->stat);
+			break;
+		}
+	}
+
+rd_exit:
+	flush_fifo();
+	writew(0xFFFF, &i2c_base->stat);
+	writew(0, &i2c_base->cnt);
+	return i2c_error;
 }
 
+/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
 	int i;
 	u16 status;
 	int i2c_error = 0;
-	u16 w;
-	u8 tmpbuf[2] = {addr >> 8, addr & 0xff};
+
+	if (alen < 0) {
+		puts("I2C write: addr len < 0\n");
+		return 1;
+	}
+
+	if (len < 0) {
+		puts("I2C write: data len < 0\n");
+		return 1;
+	}
+
+	if (buffer == NULL) {
+		puts("I2C write: NULL pointer passed\n");
+		return 1;
+	}
 
 	if (alen > 2) {
 		printf("I2C write: addr len %d not supported\n", alen);
@@ -355,92 +410,137 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 	if (addr + len > (1 << 16)) {
 		printf("I2C write: address 0x%x + 0x%x out of range\n",
-				addr, len);
+		       addr, len);
 		return 1;
 	}
 
-	/* wait until bus not busy */
+	/* Wait until bus not busy */
 	if (wait_for_bb())
 		return 1;
 
-	/* start address phase - will write regoffset + len bytes data */
-	/* TODO consider case when !CONFIG_OMAP243X/34XX/44XX */
+	/* Start address phase - will write regoffset + len bytes data */
 	writew(alen + len, &i2c_base->cnt);
-	/* set slave address */
+	/* Set slave address */
 	writew(chip, &i2c_base->sa);
-	/* stop bit needed here */
+	/* Stop bit needed here */
 	writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
-		I2C_CON_STP, &i2c_base->con);
-
-	/* Send address and data */
-	for (i = -alen; i < len; i++) {
-		status = wait_for_pin();
-
+	       I2C_CON_STP, &i2c_base->con);
+
+	while (alen) {
+		/* Must write reg offset (one or two bytes) */
+		status = wait_for_event();
+		/* Try to identify bus that is not padconf'd for I2C */
+		if (status == I2C_STAT_XRDY) {
+			i2c_error = 2;
+			printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
+			       current_bus, status);
+			goto wr_exit;
+		}
 		if (status == 0 || status & I2C_STAT_NACK) {
 			i2c_error = 1;
-			printf("i2c error waiting for data ACK (status=0x%x)\n",
-					status);
-			goto write_exit;
+			printf("i2c_write: error waiting for addr ACK (status=0x%x)\n",
+			       status);
+			goto wr_exit;
 		}
-
 		if (status & I2C_STAT_XRDY) {
-			w = (i < 0) ? tmpbuf[2+i] : buffer[i];
-#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
-	defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
-	defined(CONFIG_OMAP54XX))
-			w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8;
-#endif
-			writew(w, &i2c_base->data);
+			alen--;
+			writeb((addr >> (8 * alen)) & 0xff, &i2c_base->data);
+			writew(I2C_STAT_XRDY, &i2c_base->stat);
+		} else {
+			i2c_error = 1;
+			printf("i2c_write: bus not ready for addr Tx (status=0x%x)\n",
+			       status);
+			goto wr_exit;
+		}
+	}
+	/* Address phase is over, now write data */
+	for (i = 0; i < len; i++) {
+		status = wait_for_event();
+		if (status == 0 || status & I2C_STAT_NACK) {
+			i2c_error = 1;
+			printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
+			       status);
+			goto wr_exit;
+		}
+		if (status & I2C_STAT_XRDY) {
+			writeb(buffer[i], &i2c_base->data);
 			writew(I2C_STAT_XRDY, &i2c_base->stat);
 		} else {
 			i2c_error = 1;
-			printf("i2c bus not ready for Tx (i=%d)\n", i);
-			goto write_exit;
+			printf("i2c_write: bus not ready for data Tx (i=%d)\n",
+			       i);
+			goto wr_exit;
 		}
 	}
 
-write_exit:
+wr_exit:
 	flush_fifo();
 	writew(0xFFFF, &i2c_base->stat);
+	writew(0, &i2c_base->cnt);
 	return i2c_error;
 }
 
+/*
+ * Wait for the bus to be free by checking the Bus Busy (BB)
+ * bit to become clear
+ */
 static int wait_for_bb(void)
 {
 	int timeout = I2C_TIMEOUT;
 	u16 stat;
 
 	writew(0xFFFF, &i2c_base->stat);	/* clear current interrupts...*/
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
 	while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+#else
+	/* Read RAW status */
+	while ((stat = readw(&i2c_base->irqstatus_raw) &
+		I2C_STAT_BB) && timeout--) {
+#endif
 		writew(stat, &i2c_base->stat);
-		udelay(1000);
+		udelay(I2C_WAIT);
 	}
 
 	if (timeout <= 0) {
-		printf("timed out in wait_for_bb: I2C_STAT=%x\n",
-			readw(&i2c_base->stat));
+		printf("Timed out in wait_for_bb: status=%04x\n",
+		       stat);
 		return 1;
 	}
 	writew(0xFFFF, &i2c_base->stat);	 /* clear delayed stuff*/
 	return 0;
 }
 
-static u16 wait_for_pin(void)
+/*
+ * Wait for the I2C controller to complete current action
+ * and update status
+ */
+static u16 wait_for_event(void)
 {
 	u16 status;
 	int timeout = I2C_TIMEOUT;
 
 	do {
-		udelay(1000);
+		udelay(I2C_WAIT);
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
 		status = readw(&i2c_base->stat);
+#else
+		/* Read RAW status */
+		status = readw(&i2c_base->irqstatus_raw);
+#endif
 	} while (!(status &
 		   (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
 		    I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
 		    I2C_STAT_AL)) && timeout--);
 
 	if (timeout <= 0) {
-		printf("timed out in wait_for_pin: I2C_STAT=%x\n",
-			readw(&i2c_base->stat));
+		printf("Timed out in wait_for_event: status=%04x\n",
+		       status);
+		/*
+		 * If status is still 0 here, probably the bus pads have
+		 * not been configured for I2C, and/or pull-ups are missing.
+		 */
+		printf("Check if pads/pull-ups of bus %d are properly configured\n",
+		       current_bus);
 		writew(0xFFFF, &i2c_base->stat);
 		status = 0;
 	}
@@ -450,28 +550,36 @@ static u16 wait_for_pin(void)
 
 int i2c_set_bus_num(unsigned int bus)
 {
-	if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
-		printf("Bad bus: %d\n", bus);
+	if (bus >= I2C_BUS_MAX) {
+		printf("Bad bus: %x\n", bus);
 		return -1;
 	}
 
-#if I2C_BUS_MAX == 4
-	if (bus == 3)
-		i2c_base = (struct i2c *)I2C_BASE4;
-	else
-	if (bus == 2)
+	switch (bus) {
+	default:
+		bus = 0;	/* Fall through */
+	case 0:
+		i2c_base = (struct i2c *)I2C_BASE1;
+		break;
+	case 1:
+		i2c_base = (struct i2c *)I2C_BASE2;
+		break;
+#if (I2C_BUS_MAX > 2)
+	case 2:
 		i2c_base = (struct i2c *)I2C_BASE3;
-	else
+		break;
+#if (I2C_BUS_MAX > 3)
+	case 3:
+		i2c_base = (struct i2c *)I2C_BASE4;
+		break;
+#if (I2C_BUS_MAX > 4)
+	case 4:
+		i2c_base = (struct i2c *)I2C_BASE5;
+		break;
 #endif
-#if I2C_BUS_MAX == 3
-	if (bus == 2)
-		i2c_base = (struct i2c *)I2C_BASE3;
-	else
 #endif
-	if (bus == 1)
-		i2c_base = (struct i2c *)I2C_BASE2;
-	else
-		i2c_base = (struct i2c *)I2C_BASE1;
+#endif
+	}
 
 	current_bus = bus;
 

+ 9 - 11
drivers/mmc/omap_hsmmc.c

@@ -113,23 +113,21 @@ static void omap5_pbias_config(struct mmc *mmc)
 	u32 value = 0;
 
 	value = readl((*ctrl)->control_pbias);
-	value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
-	value |= SDCARD_BIAS_HIZ_MODE;
+	value &= ~SDCARD_PWRDNZ;
+	writel(value, (*ctrl)->control_pbias);
+	udelay(10); /* wait 10 us */
+	value &= ~SDCARD_BIAS_PWRDNZ;
 	writel(value, (*ctrl)->control_pbias);
 
 	palmas_mmc1_poweron_ldo();
 
 	value = readl((*ctrl)->control_pbias);
-	value &= ~SDCARD_BIAS_HIZ_MODE;
-	value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
+	value |= SDCARD_BIAS_PWRDNZ;
 	writel(value, (*ctrl)->control_pbias);
-
-	value = readl((*ctrl)->control_pbias);
-	if (value & (1 << 23)) {
-		value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
-		value |= SDCARD_BIAS_HIZ_MODE;
-		writel(value, (*ctrl)->control_pbias);
-	}
+	udelay(150); /* wait 150 us */
+	value |= SDCARD_PWRDNZ;
+	writel(value, (*ctrl)->control_pbias);
+	udelay(150); /* wait 150 us */
 }
 #endif
 

+ 1 - 3
drivers/net/fec_mxc.c

@@ -516,9 +516,7 @@ static int fec_open(struct eth_device *edev)
 #ifdef FEC_QUIRK_ENET_MAC
 	{
 		u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED;
-		u32 rcr = (readl(&fec->eth->r_cntrl) &
-				~(FEC_RCNTRL_RMII | FEC_RCNTRL_RMII_10T)) |
-				FEC_RCNTRL_RGMII | FEC_RCNTRL_MII_MODE;
+		u32 rcr = readl(&fec->eth->r_cntrl) & ~FEC_RCNTRL_RMII_10T;
 		if (speed == _1000BASET)
 			ecr |= FEC_ECNTRL_SPEED;
 		else if (speed != _100BASET)

+ 121 - 12
drivers/power/palmas.c

@@ -25,28 +25,137 @@
 
 void palmas_init_settings(void)
 {
-	return;
+#ifdef CONFIG_PALMAS_SMPS7_FPWM
+	int err;
+	/*
+	 * Set SMPS7 (1.8 V I/O supply on platforms with TWL6035/37) to
+	 * forced PWM mode. This reduces noise (but affects efficiency).
+	 */
+	u8 val = SMPS_MODE_SLP_FPWM | SMPS_MODE_ACT_FPWM;
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS7_CTRL, val);
+	if (err)
+		printf("palmas: could not force PWM for SMPS7: err = %d\n",
+		       err);
+#endif
 }
 
 int palmas_mmc1_poweron_ldo(void)
 {
 	u8 val = 0;
 
-	/* set LDO9 TWL6035 to 3V */
-	val = 0x2b; /* (3 -.9)*28 +1 */
-
-	if (palmas_i2c_write_u8(0x48, LDO9_VOLTAGE, val)) {
-		printf("twl6035: could not set LDO9 voltage.\n");
+#if defined(CONFIG_DRA7XX)
+	/*
+	 * Currently valid for the dra7xx_evm board:
+	 * Set TPS659038 LDO1 to 3.0 V
+	 */
+	val = LDO_VOLT_3V0;
+	if (palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, val)) {
+		printf("tps65903x: could not set LDO1 voltage.\n");
+		return 1;
+	}
+	/* TURN ON LDO1 */
+	val = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+	if (palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_CTRL, val)) {
+		printf("tps65903x: could not turn on LDO1.\n");
 		return 1;
 	}
+	return 0;
+#else
+	/*
+	 * We assume that this is a OMAP543X + TWL603X board:
+	 * Set TWL6035/37 LDO9 to 3.0 V
+	 */
+	val = LDO_VOLT_3V0;
+	return twl603x_mmc1_set_ldo9(val);
+#endif
+}
 
-	/* TURN ON LDO9 */
-	val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE;
+/*
+ * On some OMAP5 + TWL603X hardware the SD card socket and LDO9_IN are
+ * powered by an external 3.3 V regulator, while the output of LDO9
+ * supplies VDDS_SDCARD for the OMAP5 interface only. This implies that
+ * LDO9 could be set to 'bypass' mode when required (e.g. for 3.3 V cards).
+ */
+int twl603x_mmc1_set_ldo9(u8 vsel)
+{
+	u8 cval = 0, vval = 0;	/* Off by default */
+	int err;
 
-	if (palmas_i2c_write_u8(0x48, LDO9_CTRL, val)) {
-		printf("twl6035: could not turn on LDO9.\n");
-		return 1;
+	if (vsel) {
+		/* Turn on */
+		if (vsel > LDO_VOLT_3V3) {
+			/* Put LDO9 in bypass */
+			cval = LDO9_BYP_EN | RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+			vval = LDO_VOLT_3V3;
+		} else {
+			cval = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+			vval = vsel & 0x3f;
+		}
+	}
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_VOLTAGE, vval);
+	if (err) {
+		printf("twl603x: could not set LDO9 %s: err = %d\n",
+		       vsel > LDO_VOLT_3V3 ? "bypass" : "voltage", err);
+		return err;
 	}
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_CTRL, cval);
+	if (err)
+		printf("twl603x: could not turn %s LDO9: err = %d\n",
+		       cval ? "on" : "off", err);
+	return err;
+}
 
-	return 0;
+#ifdef CONFIG_PALMAS_AUDPWR
+/*
+ * Turn audio codec power and 32 kHz clock on/off. Use for
+ * testing OMAP543X + TWL603X + TWL604X boards only.
+ */
+int twl603x_audio_power(u8 on)
+{
+	u8 cval = 0, vval = 0, c32k = 0;
+	int err;
+
+	if (on) {
+		vval = SMPS_VOLT_2V1;
+		cval = SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO;
+		c32k = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+	}
+	/* Set SMPS9 to 2.1 V (for TWL604x), or to 0 (off) */
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_VOLTAGE, vval);
+	if (err) {
+		printf("twl603x: could not set SMPS9 voltage: err = %d\n",
+		       err);
+		return err;
+	}
+	/* Turn on or off SMPS9 */
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_CTRL, cval);
+	if (err) {
+		printf("twl603x: could not turn SMPS9 %s: err = %d\n",
+		       cval ? "on" : "off", err);
+		return err;
+	}
+	/* Output 32 kHz clock on or off */
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, CLK32KGAUDIO_CTRL, c32k);
+	if (err)
+		printf("twl603x: could not turn CLK32KGAUDIO %s: err = %d\n",
+		       c32k ? "on" : "off", err);
+	return err;
+}
+#endif
+
+/*
+ * Enable/disable back-up battery (or super cap) charging on TWL6035/37.
+ * Please use defined BB_xxx values.
+ */
+int twl603x_enable_bb_charge(u8 bb_fields)
+{
+	u8 val = bb_fields & 0x0f;
+	int err;
+
+	val |= (VRTC_EN_SLP | VRTC_EN_OFF | VRTC_PWEN);
+	err = palmas_i2c_write_u8(TWL603X_CHIP_P1, BB_VRTC_CTRL, val);
+	if (err)
+		printf("twl603x: could not set BB_VRTC_CTRL to 0x%02x: err = %d\n",
+		       val, err);
+	return err;
 }

+ 1 - 0
drivers/serial/Makefile

@@ -53,6 +53,7 @@ COBJS-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
 COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
 COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
 COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
+COBJS-$(CONFIG_FSL_LPUART) += serial_lpuart.o
 
 ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_USB_TTY) += usbtty.o

+ 0 - 5
drivers/serial/ns16550.c

@@ -74,13 +74,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
 	defined(CONFIG_TI814X)
 
-#if defined(CONFIG_APTIX)
-	/* /13 mode so Aptix 6MHz can hit 115200 */
-	serial_out(3, &com_port->mdr1);
-#else
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);
-#endif
 #endif /* CONFIG_OMAP */
 }
 

+ 132 - 0
drivers/serial/serial_lpuart.c

@@ -0,0 +1,132 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <serial.h>
+#include <linux/compiler.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+#define US1_TDRE        (1 << 7)
+#define US1_RDRF        (1 << 5)
+#define UC2_TE          (1 << 3)
+#define UC2_RE          (1 << 2)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct lpuart_fsl *base = (struct lpuart_fsl *)LPUART_BASE;
+
+static void lpuart_serial_setbrg(void)
+{
+	u32 clk = mxc_get_clock(MXC_UART_CLK);
+	u16 sbr;
+
+	if (!gd->baudrate)
+		gd->baudrate = CONFIG_BAUDRATE;
+
+	sbr = (u16)(clk / (16 * gd->baudrate));
+	/* place adjustment later - n/32 BRFA */
+
+	__raw_writeb(sbr >> 8, &base->ubdh);
+	__raw_writeb(sbr & 0xff, &base->ubdl);
+}
+
+static int lpuart_serial_getc(void)
+{
+	u8 status;
+
+	while (!(__raw_readb(&base->us1) & US1_RDRF))
+		WATCHDOG_RESET();
+
+	status = __raw_readb(&base->us1);
+	status |= US1_RDRF;
+	__raw_writeb(status, &base->us1);
+
+	return __raw_readb(&base->ud);
+}
+
+static void lpuart_serial_putc(const char c)
+{
+	if (c == '\n')
+		serial_putc('\r');
+
+	while (!(__raw_readb(&base->us1) & US1_TDRE))
+		WATCHDOG_RESET();
+
+	__raw_writeb(c, &base->ud);
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+static int lpuart_serial_tstc(void)
+{
+	if (__raw_readb(&base->urcfifo) == 0)
+		return 0;
+
+	return 1;
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+static int lpuart_serial_init(void)
+{
+	u8 ctrl;
+
+	ctrl = __raw_readb(&base->uc2);
+	ctrl &= ~UC2_RE;
+	ctrl &= ~UC2_TE;
+	__raw_writeb(ctrl, &base->uc2);
+
+	__raw_writeb(0, &base->umodem);
+	__raw_writeb(0, &base->uc1);
+
+	/* provide data bits, parity, stop bit, etc */
+
+	serial_setbrg();
+
+	__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
+
+	return 0;
+}
+
+static struct serial_device lpuart_serial_drv = {
+	.name = "lpuart_serial",
+	.start = lpuart_serial_init,
+	.stop = NULL,
+	.setbrg = lpuart_serial_setbrg,
+	.putc = lpuart_serial_putc,
+	.puts = default_serial_puts,
+	.getc = lpuart_serial_getc,
+	.tstc = lpuart_serial_tstc,
+};
+
+void lpuart_serial_initialize(void)
+{
+	serial_register(&lpuart_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &lpuart_serial_drv;
+}

Some files were not shown because too many files changed in this diff