Browse Source

mx6qsabrelite: increase the environment offset

The size of the binary created with the default U-boot config is much
greater than the default offset for environment `0x60000`.
In case if that binary is used for booting via MMC it is overlapped with
the environment stored on MMC.
This leads to U-Boot corruption while saving environment with `saveenv`
command and non-bootable SabreLite board.

The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in
commit a09fea1 but did not count in the change to `0xC0000` if option
`CONFIG_ENV_IS_IN_MMC` is used.

The offset is also used for variant with environment saving onto SPI NOR
flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the
U-Boot binary flashed on SPI NOR is also corrupted after environment
saving with the original 0x60000 offset.

Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Denis Pynkin 3 years ago
parent
commit
1189bd513c
1 changed files with 1 additions and 1 deletions
  1. 1 1
      configs/mx6qsabrelite_defconfig

+ 1 - 1
configs/mx6qsabrelite_defconfig

@@ -4,7 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
+CONFIG_ENV_OFFSET=0xC0000
 CONFIG_MX6Q=y
 CONFIG_TARGET_NITROGEN6X=y
 CONFIG_DM_GPIO=y