Browse Source

Consolidate bootcount code into drivers/bootcount

This patch moves all bootcount implementations into a common
directory: drivers/bootcount. The generic bootcount driver
is now usable not only by powerpc platforms, but others as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Cc: Manfred Rudigier <manfred.rudigier@omicron.at>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Tested-by: Christian Riesch <christian.riesch@omicron.at>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Stefan Roese 11 years ago
parent
commit
0044c42e94

+ 1 - 0
Makefile

@@ -249,6 +249,7 @@ LIBS-y += net/libnet.o
 LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
+LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o

+ 0 - 26
arch/arm/cpu/arm926ejs/at91/cpu.c

@@ -71,29 +71,3 @@ int print_cpuinfo(void)
 	return 0;
 }
 #endif
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-/*
- * We combine the BOOTCOUNT_MAGIC and bootcount in one 32-bit register.
- * This is done so we need to use only one of the four GPBR registers.
- */
-void bootcount_store (ulong a)
-{
-	at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
-
-	writel((BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff),
-		&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
-}
-
-ulong bootcount_load (void)
-{
-	at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
-
-	ulong val = readl(&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
-	if ((val & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
-		return 0;
-	else
-		return val & 0x0000ffff;
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */

+ 1 - 1
arch/arm/cpu/armv7/highbank/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	:= timer.o bootcount.o
+COBJS	:= timer.o
 SOBJS	:=
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

+ 0 - 36
arch/arm/cpu/armv7/highbank/bootcount.c

@@ -1,36 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-void bootcount_store(ulong a)
-{
-	writel((BOOTCOUNT_MAGIC & 0xffff0000) | a, CONFIG_SYS_BOOTCOUNT_ADDR);
-}
-
-ulong bootcount_load(void)
-{
-	u32 tmp = readl(CONFIG_SYS_BOOTCOUNT_ADDR);
-
-	if ((tmp & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
-		return 0;
-	else
-		return tmp & 0x0000ffff;
-}
-#endif

+ 0 - 22
arch/arm/cpu/ixp/cpu.c

@@ -107,28 +107,6 @@ void pci_init(void)
 }
 */
 
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
-	volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_BOOTCOUNT_ADDR);
-
-	save_addr[0] = a;
-	save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
-	volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_BOOTCOUNT_ADDR);
-
-	if (save_addr[1] != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
-
 int cpu_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_IXP4XX_NPE

+ 0 - 1
arch/blackfin/cpu/Makefile

@@ -17,7 +17,6 @@ EXTRA    := init.elf
 CEXTRA   := initcode.o
 SEXTRA   := start.o
 SOBJS    := interrupt.o cache.o
-COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o
 COBJS-y  += cpu.o
 COBJS-y  += gpio.o
 COBJS-y  += interrupts.o

+ 0 - 1
arch/powerpc/lib/Makefile

@@ -46,7 +46,6 @@ SOBJS-y	+= reloc.o
 COBJS-$(CONFIG_BAT_RW) += bat_rw.o
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
-COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o
 COBJS-y	+= cache.o
 COBJS-y	+= extable.o
 COBJS-y	+= interrupts.o

+ 0 - 29
board/enbw/enbw_cmc/enbw_cmc.c

@@ -778,35 +778,6 @@ void arch_memory_failure_handle(void)
 }
 #endif
 
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
-void bootcount_store(ulong a)
-{
-	struct davinci_rtc *reg =
-		(struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR;
-
-	/*
-	 * write RTC kick register to enable write
-	 * for RTC Scratch registers. Scratch0 and 1 are
-	 * used for bootcount values.
-	 */
-	writel(RTC_KICK0R_WE, &reg->kick0r);
-	writel(RTC_KICK1R_WE, &reg->kick1r);
-	out_be32(&reg->scratch0, a);
-	out_be32(&reg->scratch1, BOOTCOUNT_MAGIC);
-}
-
-ulong bootcount_load(void)
-{
-	struct davinci_rtc *reg =
-		(struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR;
-
-	if (in_be32(&reg->scratch1) != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return in_be32(&reg->scratch0);
-}
-#endif
-
 ulong post_word_load(void)
 {
 	struct davinci_rtc *reg =

+ 0 - 51
board/keymile/km_arm/km_arm.c

@@ -408,57 +408,6 @@ int hush_init_var(void)
 }
 #endif
 
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
-const ulong patterns[]      = {	0x00000000,
-				0xFFFFFFFF,
-				0xFF00FF00,
-				0x0F0F0F0F,
-				0xF0F0F0F0};
-const ulong NBR_OF_PATTERNS = ARRAY_SIZE(patterns);
-const ulong OFFS_PATTERN    = 3;
-const ulong REPEAT_PATTERN  = 1000;
-
-void bootcount_store(ulong a)
-{
-	ulong *save_addr;
-	ulong size = 0;
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		size += gd->bd->bi_dram[i].size;
-	save_addr = (ulong *)(size - BOOTCOUNT_ADDR);
-	writel(a, save_addr);
-	writel(BOOTCOUNT_MAGIC, &save_addr[1]);
-
-	for (i = 0; i < REPEAT_PATTERN; i++)
-		writel(patterns[i % NBR_OF_PATTERNS],
-			&save_addr[i+OFFS_PATTERN]);
-
-}
-
-ulong bootcount_load(void)
-{
-	ulong *save_addr;
-	ulong size = 0;
-	ulong counter = 0;
-	int i, tmp;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		size += gd->bd->bi_dram[i].size;
-	save_addr = (ulong *)(size - BOOTCOUNT_ADDR);
-
-	counter = readl(&save_addr[0]);
-
-	/* Is the counter reliable, check in the big pattern for bit errors */
-	for (i = 0; (i < REPEAT_PATTERN) && (counter != 0); i++) {
-		tmp = readl(&save_addr[i+OFFS_PATTERN]);
-		if (tmp != patterns[i % NBR_OF_PATTERNS])
-			counter = 0;
-	}
-	return counter;
-}
-#endif
-
 #if defined(CONFIG_SOFT_I2C)
 void set_sda(int state)
 {

+ 0 - 29
board/omicron/calimain/calimain.c

@@ -157,32 +157,3 @@ void hw_watchdog_reset(void)
 	davinci_hw_watchdog_reset();
 }
 #endif
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
-void bootcount_store(ulong a)
-{
-	struct davinci_rtc *reg =
-		(struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR;
-
-	/*
-	 * write RTC kick register to enable write
-	 * for RTC Scratch registers. Scratch0 and 1 are
-	 * used for bootcount values.
-	 */
-	writel(RTC_KICK0R_WE, &reg->kick0r);
-	writel(RTC_KICK1R_WE, &reg->kick1r);
-	writel(a, &reg->scratch0);
-	writel(BOOTCOUNT_MAGIC, &reg->scratch1);
-}
-
-ulong bootcount_load(void)
-{
-	struct davinci_rtc *reg =
-		(struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR;
-
-	if (readl(&reg->scratch1) != BOOTCOUNT_MAGIC)
-		return 0;
-	else
-		return readl(&reg->scratch0);
-}
-#endif

+ 45 - 0
drivers/bootcount/Makefile

@@ -0,0 +1,45 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libbootcount.o
+
+COBJS-y				+= bootcount.o
+COBJS-$(CONFIG_AT91SAM9XE)	+= bootcount_at91.o
+COBJS-$(CONFIG_BLACKFIN)	+= bootcount_blackfin.o
+COBJS-$(CONFIG_SOC_DA8XX)	+= bootcount_davinci.o
+COBJS-$(CONFIG_BOOTCOUNT_RAM)	+= bootcount_ram.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################

+ 14 - 11
arch/powerpc/lib/bootcount.c → drivers/bootcount/bootcount.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2010
+ * (C) Copyright 2010-2012
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -21,8 +21,8 @@
  * MA 02111-1307 USA
  */
 
-#include <common.h>
-#include <asm/io.h>
+#include <bootcount.h>
+#include <linux/compiler.h>
 
 /*
  * Only override CONFIG_SYS_BOOTCOUNT_ADDR if not already defined. This
@@ -65,33 +65,36 @@
 
 #endif /* !defined(CONFIG_SYS_BOOTCOUNT_ADDR) */
 
-void bootcount_store(ulong a)
+/* Now implement the generic default functions */
+#if defined(CONFIG_SYS_BOOTCOUNT_ADDR)
+__weak void bootcount_store(ulong a)
 {
 	void *reg = (void *)CONFIG_SYS_BOOTCOUNT_ADDR;
 
 #if defined(CONFIG_SYS_BOOTCOUNT_SINGLEWORD)
-	out_be32(reg, (BOOTCOUNT_MAGIC & 0xffff0000) | a);
+	raw_bootcount_store(reg, (BOOTCOUNT_MAGIC & 0xffff0000) | a);
 #else
-	out_be32(reg, a);
-	out_be32(reg + 4, BOOTCOUNT_MAGIC);
+	raw_bootcount_store(reg, a);
+	raw_bootcount_store(reg + 4, BOOTCOUNT_MAGIC);
 #endif
 }
 
-ulong bootcount_load(void)
+__weak ulong bootcount_load(void)
 {
 	void *reg = (void *)CONFIG_SYS_BOOTCOUNT_ADDR;
 
 #if defined(CONFIG_SYS_BOOTCOUNT_SINGLEWORD)
-	u32 tmp = in_be32(reg);
+	u32 tmp = raw_bootcount_load(reg);
 
 	if ((tmp & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
 		return 0;
 	else
 		return (tmp & 0x0000ffff);
 #else
-	if (in_be32(reg + 4) != BOOTCOUNT_MAGIC)
+	if (raw_bootcount_load(reg + 4) != BOOTCOUNT_MAGIC)
 		return 0;
 	else
-		return in_be32(reg);
+		return raw_bootcount_load(reg);
 #endif
 }
+#endif

+ 43 - 0
drivers/bootcount/bootcount_at91.c

@@ -0,0 +1,43 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_gpbr.h>
+
+/*
+ * We combine the BOOTCOUNT_MAGIC and bootcount in one 32-bit register.
+ * This is done so we need to use only one of the four GPBR registers.
+ */
+void bootcount_store(ulong a)
+{
+	at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
+
+	writel((BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff),
+		&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
+}
+
+ulong bootcount_load(void)
+{
+	at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
+
+	ulong val = readl(&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
+	if ((val & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
+		return 0;
+	else
+		return val & 0x0000ffff;
+}

+ 0 - 0
arch/blackfin/cpu/bootcount.c → drivers/bootcount/bootcount_blackfin.c


+ 49 - 0
drivers/bootcount/bootcount_davinci.c

@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <bootcount.h>
+#include <asm/arch/da850_lowlevel.h>
+#include <asm/arch/davinci_misc.h>
+
+void bootcount_store(ulong a)
+{
+	struct davinci_rtc *reg =
+		(struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR;
+
+	/*
+	 * write RTC kick register to enable write
+	 * for RTC Scratch registers. Scratch0 and 1 are
+	 * used for bootcount values.
+	 */
+	writel(RTC_KICK0R_WE, &reg->kick0r);
+	writel(RTC_KICK1R_WE, &reg->kick1r);
+	raw_bootcount_store(&reg->scratch0, a);
+	raw_bootcount_store(&reg->scratch1, BOOTCOUNT_MAGIC);
+}
+
+ulong bootcount_load(void)
+{
+	struct davinci_rtc *reg =
+		(struct davinci_rtc *)CONFIG_SYS_BOOTCOUNT_ADDR;
+
+	if (raw_bootcount_load(&reg->scratch1) != BOOTCOUNT_MAGIC)
+		return 0;
+	else
+		return raw_bootcount_load(&reg->scratch0);
+}

+ 72 - 0
drivers/bootcount/bootcount_ram.c

@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const ulong patterns[]      = {	0x00000000,
+				0xFFFFFFFF,
+				0xFF00FF00,
+				0x0F0F0F0F,
+				0xF0F0F0F0};
+const ulong NBR_OF_PATTERNS = sizeof(patterns) / sizeof(*patterns);
+const ulong OFFS_PATTERN    = 3;
+const ulong REPEAT_PATTERN  = 1000;
+
+void bootcount_store(ulong a)
+{
+	ulong *save_addr;
+	ulong size = 0;
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		size += gd->bd->bi_dram[i].size;
+	save_addr = (ulong *)(size - BOOTCOUNT_ADDR);
+	writel(a, save_addr);
+	writel(BOOTCOUNT_MAGIC, &save_addr[1]);
+
+	for (i = 0; i < REPEAT_PATTERN; i++)
+		writel(patterns[i % NBR_OF_PATTERNS],
+			&save_addr[i + OFFS_PATTERN]);
+
+}
+
+ulong bootcount_load(void)
+{
+	ulong *save_addr;
+	ulong size = 0;
+	ulong counter = 0;
+	int i, tmp;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		size += gd->bd->bi_dram[i].size;
+	save_addr = (ulong *)(size - BOOTCOUNT_ADDR);
+
+	counter = readl(&save_addr[0]);
+
+	/* Is the counter reliable, check in the big pattern for bit errors */
+	for (i = 0; (i < REPEAT_PATTERN) && (counter != 0); i++) {
+		tmp = readl(&save_addr[i + OFFS_PATTERN]);
+		if (tmp != patterns[i % NBR_OF_PATTERNS])
+			counter = 0;
+	}
+	return counter;
+}

+ 51 - 0
include/bootcount.h

@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2012
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#if !defined(CONFIG_SYS_BOOTCOUNT_LE) && !defined(CONFIG_SYS_BOOTCOUNT_BE)
+# if __BYTE_ORDER == __LITTLE_ENDIAN
+#  define CONFIG_SYS_BOOTCOUNT_LE
+# else
+#  define CONFIG_SYS_BOOTCOUNT_BE
+# endif
+#endif
+
+#ifdef CONFIG_SYS_BOOTCOUNT_LE
+static inline void raw_bootcount_store(volatile u32 *addr, u32 data)
+{
+	out_le32(addr, data);
+}
+
+static inline u32 raw_bootcount_load(volatile u32 *addr)
+{
+	return in_le32(addr);
+}
+#else
+static inline void raw_bootcount_store(volatile u32 *addr, u32 data)
+{
+	out_be32(addr, data);
+}
+
+static inline u32 raw_bootcount_load(volatile u32 *addr)
+{
+	return in_be32(addr);
+}
+#endif

+ 1 - 0
include/configs/calimain.h

@@ -352,6 +352,7 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(0x8001ff00)
 
 #define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	DAVINCI_RTC_BASE
 
 #ifndef __ASSEMBLY__

+ 1 - 0
include/configs/enbw_cmc.h

@@ -458,6 +458,7 @@
 
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_ADDR	DAVINCI_RTC_BASE
+#define CONFIG_SYS_BOOTCOUNT_BE
 
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc0080000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x60004000

+ 2 - 0
include/configs/highbank.h

@@ -41,6 +41,8 @@
 #define CONFIG_BAUDRATE			38400
 
 #define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
+#define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
 
 #define CONFIG_MISC_INIT_R

+ 2 - 0
include/configs/km/km_arm.h

@@ -307,6 +307,8 @@ int get_scl(void);
 #define CONFIG_KM_RESERVED_PRAM 0x801000
 /* address for the bootcount (taken from end of RAM) */
 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
+/* Use generic bootcount RAM driver */
+#define CONFIG_BOOTCOUNT_RAM
 
 /* enable POST tests */
 #define CONFIG_POST	(CONFIG_SYS_POST_MEM_REGIONS)