How to get started with the MinnowBoard MAX =========================================== 1. Build Apply the defconfig: $ make minnowboard_max_defconfig Add any additional packages required and build: $ make 2. Write the SD card The build process will create a SD card image in output/images. Write the image to an mSD card, insert into the MinnowBoard MAX and power the board on. $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync The system starts two consoles: one on the serial port and one on HDMI. 3. Enjoy Additional information about this board can be found at http://www.minnowboard.org/.