CircuitCo BeagleBone Texas Instuments AM335x Evaluation Module (TMDXEVM3358) Description =========== This configuration will build a complete image for the beaglebone and the TI AM335x-EVM, the board type is identified by the on-board EEPROM. The configuration is based on the ti-processor-sdk-06.01.00.08. Device tree blobs for beaglebone variants and the evm-sk are built too. For Qt5 support support use the beaglebone_qt5_defconfig. How to build it =============== Select the default configuration for the target: $ make beaglebone_defconfig Optional: modify the configuration: $ make menuconfig Build: $ make Result of the build =================== output/images/ +-- am335x-boneblack.dtb +-- am335x-bone.dtb +-- am335x-evm.dtb +-- am335x-evmsk.dtb +-- boot.vfat +-- MLO +-- rootfs.ext2 +-- rootfs.tar +-- sdcard.img +-- u-boot.img +-- uEnv.txt +-- zImage To copy the image file to the sdcard use dd: $ dd if=output/images/sdcard.img of=/dev/XXX Running Qt5 hellowindow opengl demo: =================== # export QT_QPA_EGLFS_KMS_CONFIG=/etc/qt5/eglfs_kms_cfg.json # export QT_QPA_PLATFORM=eglfs # export QT_QPA_EGLFS_INTEGRATION=none # /usr/lib/qt/examples/opengl/hellowindow/hellowindow Tested hardware =============== am335x-evm (rev. 1.1A) beagleboneblack (rev. A5A) beaglebone (rev. A6) 2020, Adam Duskett 2016, Lothar Felten