Нема описа

Michel-FK 211d57ea37 FunKey S Rev. E public release пре 3 година
3D 97fd2901ec first commit пре 3 година
BOM 97fd2901ec first commit пре 3 година
Datasheets c14c3ea667 add LCD display datasheet пре 3 година
FunKey.pretty 97fd2901ec first commit пре 3 година
Gerber 87029f4269 use Protel extensions for gerber files пре 3 година
PDF 97fd2901ec first commit пре 3 година
Pictures 39c65c06de update PCB pictures пре 3 година
shapes3D 97fd2901ec first commit пре 3 година
.gitignore 97fd2901ec first commit пре 3 година
Fun!key.bck 97fd2901ec first commit пре 3 година
FunKey PCB.kicad_wks 97fd2901ec first commit пре 3 година
FunKey-cache.lib 97fd2901ec first commit пре 3 година
FunKey.bck 97fd2901ec first commit пре 3 година
FunKey.dcm 97fd2901ec first commit пре 3 година
FunKey.kicad_pcb 97fd2901ec first commit пре 3 година
FunKey.kicad_wks 97fd2901ec first commit пре 3 година
FunKey.lib 97fd2901ec first commit пре 3 година
FunKey.net 97fd2901ec first commit пре 3 година
FunKey.pro 97fd2901ec first commit пре 3 година
FunKey.sch 97fd2901ec first commit пре 3 година
LICENCE 97fd2901ec first commit пре 3 година
README.md 211d57ea37 FunKey S Rev. E public release пре 3 година
fp-info-cache 97fd2901ec first commit пре 3 година
fp-lib-table 97fd2901ec first commit пре 3 година
sym-lib-table 97fd2901ec first commit пре 3 година

README.md

licensebuttons by-nc-sa

FunKey S Hardware

This repository contains all the hardware design and production files required to build the FunKey-S retro-gaming console electronic PCBA using the KiCAD ECAD tools.

If you don’t want to install these tools but still want to get an idea of what it looks like, you can check the schematics and the layout in PDF format, the interactive BOM is directly in HTML format, you can download it and display it in a browser.

The FunKey S is a small foldable retro-gaming console.

Its electronic parts consist in:

  • 1x main PCB (0.8 mm thickness) with components on both sides, the maximum component height above PCB on both sides is 1.5 mm. Current revision for this board is Revision E
  • 1x 1.54” IPS LCD TFT screen with SPI interface and using a custom flex cable
  • 1x 420 mAh 402540 LiPo battery

FunKey S Block Diagram

The FunKey S PCBA Rev. E contains the following main components:

  • 1x Allwinner V3s SoC with integrated 64MB DDR2 DRAM (LQFP128 package)
  • 1x X-Powers AXP209 companion PMIC chip to provide almost all required power supply rails (QFN48 package)
  • 1x Sylergy SY8088 Buck DC/DC SMPS chip to provide the DRAM power supply rail (SOT23-5 package)
  • 1x NXP PCAL6416 I2C GPIO expander to control all buttons and keypads (except Power Key) (QFN24 package)
  • 1x Diodes Inc. PAM8301 mono audio amplifier (TSOT26 package)
  • 1x 24 MHz main crystal
  • 1x 32.768 kHz RTC crystal
  • 1x Standex-Meder MK24 Reed switch for magnet proximity detection
  • 1x LED for charge indication
  • 1x 8 Ω 0.3 W built-in speaker
  • 1x Micro USB edge-mounted connector
  • 1x Micro SD (TF Card) Push/Push low-profile connector
  • 1x Hirose DF37 0.4 mm pitch miniature LCD connector
  • 1x JST 1 mm pitch battery connector
  • 1x 1.27 mm pitch debug UART header (not mounted)

FunKey Top

FunKey Bottom