cuu 730b43cb3f first commit | 2 yıl önce | |
---|---|---|
.. | ||
conf | 2 yıl önce | |
db | 2 yıl önce | |
dists | 2 yıl önce | |
pool | 2 yıl önce | |
KEY.gpg | 2 yıl önce | |
README.md | 2 yıl önce |
SPI0 is disabled by default. To enable it, use raspi-config, or ensure the line dtparam=spi=on isn’t commented out in /boot/config.txt
add dtoverlay=spi-gpio35-39 under dtparam=spi=on, then reboot
after reboot,make suer there is a /dev/spidev0.0
wget -O - https://raw.githubusercontent.com/clockworkpi/apt/main/debian/KEY.gpg | sudo apt-key add -
echo «deb https://raw.githubusercontent.com/clockworkpi/apt/main/debian/ stable main» | sudo tee -a /etc/apt/sources.list.d/clockworkpi.list
sudo apt update
sudo apt install devterm-thermal-printer
echo «this is a test» > /tmp/DEVTERM_PRINTER_IN